Click Here to download this file: http://www.murata-ps.com/data/power/cps/odc_vr102b120cs-2c.pdf

DC/DC
Converter
DC/DC
Converter
Programmable, Single Output, 1.1V - 1.85Vout @ 60A
Programmable, Single Output, 0.8375V - 1.600Vout @ 120A
VR102B120CS-2C
Features
•
•
•
•
•
•
•
•
Meets VRM 10.1 and VRM 10.2C Requirements
DAC Programmable Output Voltage
Power Good Output
Differential Remote Sense
Remote Enable
Supervisory Functions
• Output Overcurrent
• Short Circuit Protection
• Overtemperature Indicator
• Output Current Level Signal
Tri-state Output when Disabled
Dynamic VID Capability
Table 1:
Input Characteristics
Notes and Conditions (1)
Input Voltage Operating Range
Input Undervoltage Lockout
Maximum Input Current
Min
Typ
Max
Units
11.4
12.0
12.60
Vdc
Turn-on Threshold
9.7
11.0
Vdc
Turn-off Threshold
9.0
10.3
Vdc
Hysteresis Voltage
0.7
1.0
Vdc
No-Load Input Current
Typical: 105A 1.325VID
Max: 120A 1.6VID
Enable state, no Load
13
200
Disabled Input Current
Disabled State
20
Enable - Positive Logic Version
On State Range
Off State Range
A
320
18
400
mA
30
50
mA
0.8
5.0
Vdc
-0.3
0.4
Vdc
Table 2:
Output Characteristics
Notes and Conditions (1)
Min
Output Voltage Set Point
6-Bit DAC Controlled
0.8375
Output Line Regulation
-5
Output Load Regulation
Typ
0
20 MHz Bandwidth
Vdc
5
mV
m:
6.4
0
Efficiency
Io = 105 Amps VID = 1.325
Turn-on Time
Vin present: Enable to 90% Vout
Transient Response (3)
100A step, 100A/µS, 'Vo
www.murata-ps.com
1.600
VID-40
Output Current Operating Range
Remote Sense Compensation Range
(4)
Recommended Bulk Output
Capacitance
Units
1.25
Output Voltage Total Regulation
Output Ripple Voltage & Noise (2)
Max
83
UCC 4PS560MH11 or equivalent
mVp-p
120
85
81
14
mV
A
%
50
mS
135
mV
300
mV
EA
Technical enquiries - email: [email protected], tel: +1 508 339 3000
DC/DC
Converter
DC/DC
Converter
Programmable, Single Output, 1.1V - 1.85Vout @ 60A
Programmable, Single Output, 0.8375V - 1.600Vout @ 120A
Table 3:
Protection Characteristics
Notes and Conditions (1)
Min
Output Overcurrent Shutdown
Latching
Overvoltage Shutdown
Above VID
Overtemperature Indicator
Non-Latching, at hot spots
Worst case junction temperature
VID = 1.325, 0 A Load
VID = 1.325, 100 A Load
Load Indicator
Typ
Max
Units
125
168
A
90
200
mV
135
°C
0
2
V
Table 4:
General Characteristics
Notes and Conditions (1)
Min
Storage Temperature Range
Non-condensing
-40
Operating Temperature Range
Typ
0
Semiconductor Junction Temperature
Package rated to 150°C
Material Flammability
UL 94V-0
MTBF
Calculated (RAC PRISM)
TBD
Demonstrated
Switching Frequency
Per phase
Dimensions
3.8”L x 2.5”H x 0.870”W
Weight
Max
Units
70
°C
60
°C
115
°C
x106 Hrs
x106 Hrs
300
KHz
59
g
Notes:
1. Vin = 12Vdc, Ta = 25°C, Airflow = 400LFM unless otherwise noted.
2. Output Ripple Voltage is specified when measured with Intel specified capacitance at the output of the converter.
3. Transient response is specified with Intel specified capacitors at the output of the converter.
4. If remote sense is not required or used, the Sense(+) and Sense(-) pins must be connected to Vo(+) and Vo(-) respectively.
5. VRM_PRES and VRM_ID are connected to Vss on the VRM.
www.murata-ps.com
Technical enquiries - email: [email protected], tel: +1 508 339 3000
DC/DC
Converter
DC/DC
Converter
Programmable, Single Output, 1.1V - 1.85Vout @ 60A
Programmable, Single Output, 0.8375V - 1.600Vout @ 120A
Mechanical Information
Figure 1
Recommended Interface Connector Options
Tyco/Elcon
283-0172-01303 (Solder Tail, Long)
283-0172-02303 (Solder Tail, Short)
284-0202-03003 (Surface Mount)
www.murata-ps.com
Technical enquiries - email: [email protected], tel: +1 508 339 3000
DC/DC
Converter
DC/DC
Converter
Programmable, Single Output, 1.1V - 1.85Vout @ 60A
Programmable, Single Output, 0.8375V - 1.600Vout @ 120A
Derating Curves
Output Current (Amps)
Thermal Derating Curves
110
105
100 LFM
100
200 LFM
95
300 LFM
90
400 LFM
85
500 LFM
80
75
35
45
50
55
60
Temperature (deg C)
Pin Assignment
1.00
(5)
(5)
VRM ID
VRM_Pres
N/C
Figure 2
www.murata-ps.com
Technical enquiries - email: [email protected], tel: +1 508 339 3000
DC/DC
Converter
DC/DC
Converter
Programmable, Single Output, 1.1V - 1.85Vout @ 60A
Programmable, Single Output, 0.8375V - 1.600Vout @ 120A
Ordering Information
VR102B120CS-2C
C = RoHS Compliant (Option)
Family Name
Version
Form Factor
S = Standard Height
VRM Spec
102 = 10.2
Mounting Type
C = Card-edge
Input Voltage
B = 12Vin
Peak Current
120 = 120A
RoHS Compliancy
The VR102B120CS-2C is in compliance with the European Union Directive 2002/95/EC (RoHS) with
respect to the following substances: lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium,
polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
RoHS Process Note
This product is not intended to go through a reflow solder process. See recommended interface connector
options.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: [email protected] ISO 9001 and 14001 REGISTERED
01/19/09
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2008 Murata Power Solutions, Inc.
www.murata-ps.com
USA:
Mansfield (MA), Tel: (508) 339-3000, email: [email protected]
Canada:
Toronto, Tel: (866) 740-1232, email: [email protected]
UK:
Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected]
France:
Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected]
Germany:
München, Tel: +49 (0)89-544334-0, email: [email protected]
Japan:
Tokyo, Tel: 3-3779-1031, email: [email protected]
Osaka, Tel: 6-6354-2025, email: [email protected]
China:
Shanghai, Tel: +86 215 027 3678, email: [email protected]
Guangzhou, Tel: +86 208 221 8066, email: [email protected]
Singapore:
Parkway Centre, Tel: +65 6348 9096, email: [email protected]
Technical enquiries - email: [email protected], tel: +1 508 339 3000