ctep105lf

Power Inductors - Shielded
CTEP105LF
Series
From 0.36 µH to 8.8 µH
www.ctparts.com
SPECIFICATIONS
Part numbers indicate inductance tolerance available.
M = ±20%, N = ±30%
L Test
DCR
Saturation
Part
Inductance
Freq.
Max.
Current
Number
(µH)
(KHz)
(mΩ)
(A)
CTEP105LF-R36N
0.36
100
2.6
24.0
CTEP105LF-R80M
0.8
100
3.2
16.0
CTEP105LF-1R4M
CTEP105LF-2R2M
CTEP105LF-3R2M
CTEP105LF-4R3M
CTEP105LF-5R7M
CTEP105LF-7R2M
CTEP105LF-8R8M
1.4
2.2
3.2
4.3
5.7
7.2
8.8
100
100
100
100
100
100
100
4.1
5.3
8.0
10.5
12.4
18.0
23.8
Temperature
Current
(A)
21.0
18.0
12.0
9.6
7.8
6.8
5.8
5.3
4.5
14.0
13.0
10.5
9.0
8.0
7.8
7.0
PHYSICAL DIMENSIONS
Size A
Max.
mm 10.4
inches 0.41
B
C
D
E
F
G
H
I
Max.
Max.
Ref.
Ref.
Ref.
Ref.
Ref.
Ref.
10.4
5.6
5.5
6.7
2.6
1.4
2.6
0.41
0.22
0.216
0.26
0.10
0.05
0.10
A
C
XXX
D
Not Shown at Actual Size
5.5
0.216
B
CHARACTERISTICS
Marking
(Inductance Code)
Connection (Bottom View)
E
H
G
I
2
3
F
1
PAD LAYOUT
Unit: mm
8.5
2.0
2.5
Description: SMD Shielded Power Inductor
Applications: LCD Television sets, Notebooks, PCs, Portable
Communication equipment, DC/DC Converters, etc.
Operating Temperature: -30°C to +100°C (includes temperature
when the coil is heated)
Saturation Current: This indicates the value of current when the
inductance is 25% lower than it’s inital value at D.C. superposition
or D.C. current.
Temperature Current: To load onto the components under
normal ambience, which cause the temperature change as
DT=40°C or more lower current.
Inductance Tolerance: ±20%, ±30%
Testing: Inductance is tested on an HP4285A at 100KHz.
Packaging: Tape and Reel.
Marking: Parts are marked with inductance code.
Miscellaneous: RoHS Compliant.
Additional Information: Additional electrical & physical
information available upon request.
Samples available. See website for ordering information.
6.7
11.0
Manufacturer of Passive Components
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
REV 11.02.12