UNISONIC TECHNOLOGIES CO., LTD LMV331 LINEAR INTEGRATED CIRCUIT SINGLE GENERAL PURPOSE, LOW VOLTAGE, SMALL PACK COMPARATORS DESCRIPTION The UTC LMV331 is the single version, which is available in space saving SOT23-5 packages. The UTC LMV331 is the most cost-effective solution where space, low voltage, low power and price are the primary specification in circuit design for portable consumer products. The UTC LMV331 have bipolar input and output stages for improved noise performance. FEATURES * Low operating voltage 2.7-5V. * Industrial temperature range (−40˚C~+85˚C) * Low supply current 60µA * Input common mode voltage range includes ground * Low output saturation voltage 0.2V ORDERING INFORMATION Ordering Number LMV331G-AE5-R LMV331G-AL5-R Package SOT-23-5 SOT-353 Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 6 QW-R104-006.C LMV331 LINEAR INTEGRATED CIRCUIT PIN CONFIGURATION PIN DESCRIPTION PIN NO. 1 2 3 4 5 PIN NAME +VIN GND +VIN OUTPUT VCC+ DESCRIPTION Non-inverting input Ground inverting input Output Power supply BLOCK DIAGRAM VCC+ Q7 Q6 M1 OUTPUT +VIN Q1 Q2 Q4 Q5 Q3 Q8 -VIN R3 R2 R1 GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R104-006.C LMV331 LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC 2.7~5.5 V Differential Input Voltage VIN(DIFF) ±VCC V Voltage on Any Pin (Referred to GND pin) 5.5 V Soldering Information Infrared or Convection (20 sec) 235 °C Junction Temperature (Note 1) TJ 150 °C Operating Temperature TOPR -40~+85 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (Note1) PARAMETER Junction to Ambient SYMBOL SOT-23-5 SOT-353 θJA RATINGS 265 350 UNIT °C/W °C/W 2.7V DC ELECTRICAL CHARACTERISTICS (All limits guaranteed for TJ=25˚C, V+=2.7V, V−=0V, unless otherwise specified. Boldface limits apply at the temperature extremes.) TYP MAX UNIT PARAMETER SYMBOL TEST CONDITIONS MIN (Note 2) (Note 3) Input Offset Voltage VOS 1.7 7 mV Input Offset Voltage Average Drift TCVOS 5 µV/˚C Input Bias Current IB 10 250 nA Input Offset Current IOS 5 50 nA -0.1 V Input Voltage Range VCM 2.0 V Saturation Voltage VSAT Isink≤1mA 200 mV Output Sink Current IO VO≤1.5V 5 23 mA Supply Current IS 40 100 µA Output Leakage Current 0.003 1 µA 2.7V AC ELECTRICAL CHARACTERISTICS (TJ=25˚C, V+=2.7V, RL=5.1kΩ, V−=0V.) PARAMETER SYMBOL Propagation Delay (High to Low) tPHL Propagation Delay (Low to High) tPLH TEST CONDITIONS Input Overdrive=10mV Input Overdrive=100mV Input Overdrive=10mV Input Overdrive=100mV UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP (Note 2) 1000 350 500 400 MAX UNIT ns ns ns ns 3 of 6 QW-R104-006.C LMV331 LINEAR INTEGRATED CIRCUIT 5V DC ELECTRICAL CHARACTERISTICS (All limits guaranteed for TJ=25˚C, V+=5V, V−=0V, Unless otherwise specified. Boldface limits apply temperature extremes.) TYP MAX PARAMETER SYMBOL TEST CONDITIONS MIN (Note 2) (Note 3) Input Offset Voltage VOS 1.7 7 Input Offset Voltage Average Drift TCVOS 5 Input Bias Current IB 25 250 Input Offset Current IOS 2 50 -0.1 Input Voltage Range VCM 4.2 Voltage Gain AV 20 50 Saturation Voltage VSAT Isink≤4mA 200 400 Output Sink Current IO VO≤1.5V 10 84 Supply Current IS 60 120 Output Leakage Current 0.003 1 at the UNIT mV µV/˚C nA nA V V V/mV mV mA µA µA 5V AC ELECTRICAL CHARACTERISTICS (TJ=25˚C, V+=5V, RL=5.1kΩ, V−=0V.) TYP MAX UNIT (Note 2) Input Overdrive=10mV 600 ns Propagation Delay (High to Low) tPHL Input Overdrive=100mV 200 ns Input Overdrive=10mV 450 ns Propagation Delay (Low to High) tPLH Input Overdrive=100mV 300 ns Notes: 1. The maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD=(TJ(max)-TA)/θJA. All numbers apply for packages soldered directly into a PC board. 2. Typical Values represent the most likely parametric norm. 3. All limits are guaranteed by testing or statistical analysis. PARAMETER SYMBOL UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS MIN 4 of 6 QW-R104-006.C LMV331 LINEAR INTEGRATED CIRCUIT TYPICAL APPLICATION CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R104-006.C LMV331 LINEAR INTEGRATED CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R104-006.C