Click Here to download this file: http://www.murata-ps.com/data/power/ncl/tdc_hl01rzc.pdf

HL01RZC
www.murata-ps.com
1 WATT REGULATED DC/DC CONVERTER
FEATURES
„
LOW COST
„
NON-CONDUCTIVE CASE
„
INTERNAL INPUT AND OUTPUT FILTERING
„
SHORT CIRCUIT PROTECTED
„
BUILT-IN STANDOFFS
„
INDUSTRY STANDARD PINOUT
„
ROHS COMPLIANT
OBSOLETE PRODUCT
DESCRIPTION
The HL01RZC Series uses advanced circuit design and
packaging technology to realize superior reliability and
performance. A 125kHz push-pull oscillator is used in
the input stage. Beat-frequency oscillator problems
are reduced when using the HL01RZC Series with high
frequency isolation amplifiers.
Reduced parts count and all surface mount construction add
to the reliability of the HL01RZC Series. The use of surface
mount devices and magnetics eliminate hand soldering
operations. This "hands-free" construction increases quality
and reliability while keeping cost low.
ORDERING INFORMATION
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation.......................................................1.2W
Short Circuit Duration....................................................Continuous
Lead Temperature (soldering, 10 seconds max)................+300°C
*
*Note: Refer to Reflow Profile for SMD Models.
TYPICAL PERFORMANCE CURVES
HL01R xxyzz Z
RECOMMENDED LAND PATTERN
Specifications typical at TA = +25°C, nominal input voltage, rated
output current unless otherwise specified.
0.100"
(2.54)
EFFICIENCY vs LOAD
60%
2423 22
1514 13
50%
Efficiency (%)
C
Device Family
HL Indicates DC/DC Converter
Model Number
Where:
xx = Input Voltage
y = Number or Outputs (Single "S", Dual "D")
zz = Output Voltage
Package Option
RoHS Compliant
0.080"
(2.03)
0.730"
(18.54)
40%
0.040"
(1.02)
30%
1 2 3
20%
10 11 12
1.150"
(29.21)
10%
0%
0%
25%
50%
Load (mA)
75%
100%
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: [email protected], tel: +1 508 339 3000
HL01RZC.B03 Page 1 of 3
HL01RZC
1 WATT REGULATED DC/DC CONVERTER
ELECTRICAL SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
NOMINAL
INPUT
VOLTAGE
RATED
OUTPUT
VOLTAGE
RATED
OUTPUT
CURRENT
(VDC)
(VDC)
(mA)
(mA)
HL01R05S05ZC
HL01R05S12ZC
HL01R05S15ZC
5
5
5
5
12
15
200
83
67
50
50
50
400
400
400
58
52
52
HL01R12S05ZC
HL01R12S12ZC
HL01R12S15ZC
12
12
12
5
12
15
200
83
67
40
40
40
160
160
160
58
52
52
HL01R15S05ZC
HL01R15S12ZC
HL01R15S15ZC
15
15
15
5
12
15
200
83
67
30
30
30
130
130
130
58
52
52
HL01R24S05ZC
HL01R24S12ZC
HL01R24S15ZC
24
24
24
5
12
15
200
83
67
20
20
20
80
80
80
58
52
52
HL01R05D05ZC
HL01R05D12ZC
HL01R05D15ZC
5
5
5
±5
±12
±15
±100
±41
±33
50
50
50
425
400
400
45
53
53
HL01R12D05ZC
HL01R12D12ZC
HL01R12D15ZC
12
12
12
±5
±12
±15
±100
±41
±33
40
40
40
185
160
160
45
53
53
HL01R15D05ZC
HL01R15D12ZC
HL01R15D15ZC
15
15
15
±5
±12
±15
±100
±41
±33
30
30
30
145
130
130
45
53
53
HL01R24D05ZC
HL01R24D12ZC
HL01R24D15ZC
24
24
24
±5
±12
±15
±100
±41
±33
20
20
20
90
80
80
45
53
53
TYP
MAX
MODEL
INPUT CURRENT
MIN LOAD
RATED LOAD
(mA)
EFFICIENCY
(%)
Note: Other input to output voltages may be available. Please contact factory.
COMMON SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
PARAMETER
CONDITIONS
INPUT
Voltage Range
MIN
4.75
11.4
14.25
22.8
Reflected Ripple Current
ISOLATION
Rated Voltage
Test Voltage
Resistance
Capacitance
Leakage Current
OUTPUT
Rated Power
Voltage Setpoint Accuracy
Temperature Coefficent
Ripple & Noise
Line Regulation
Load Regulation
GENERAL
Switching Frequency
Package Weight
MTTF per MIL-HDBK-217, Rev. F
Ground Benign
TEMPERATURE
Specification
Operation
Storage
www.murata-ps.com
5
12
15
24
30
5.25
12.6
15.75
25.2
100
VDC
VDC
VDC
VDC
mAp-p
VISO= 240VAC, 60Hz
1
25
2
10
VDC
Vpk
G:
pF
μArms
BW = DC to 10MHz
BW =10Hz to 2MHz
High Line to Low Line
Rated Load to No Load
1
±3
±0.01
30
1
±0.1
±0.5
±5
±0.02
100
10
±1
±1
W
%
%/°C
mVp-p
mVrms
%
%
60 Hz, 10 Seconds
500
500
UNITS
125
10
kHz
g
675
kHr
Circuit Stress Method
-25
-40
-40
+70
+85
+110
°C
°C
°C
Technical enquiries email: [email protected], tel: +1 508 339 3000
HL01RZC.B03 Page 2 of 3
HL01RZC
MECHANICAL
1 WATT REGULATED DC/DC CONVERTER
Package/Pinout "Z"
Ò
Ò
TOP VIEWS
Ò
Ò
(,2XXYZZ:#
Ò
Ò
SIDE VIEWS
Ò
Ò
Ò
Ò
Ò
Ò
Ò
Ò
END VIEWS
Ò
Ò
Ò
Ò
NU = Do Not Use.
NC = No Internal Connection.
Duplicate pin functions are internally connected.
PIN CONNECTIONS
SMD PACKAGE
PIN#
SINGLES
DUALS
GRID: 0.100 inches (2.54 millimeters)
1
2
3
+VIN
NU
NU
+VIN
-VOUT
Common
Typically Marked with: specific model ordered,
date code, job code and Logo.
10
11
12
-VOUT
+VOUT
-VIN
Common
+VOUT
-VIN
Pin base metal is phosphor bronze. Pin finish
is matte tin (100-300 microinches) over a nickel
barrier layer (5-40 microinches).
13
14
15
-VIN
+VOUT
-VOUT
-VIN
+VOUT
Common
22
23
24
NU
NU
+VIN
Common
-VOUT
+VIN
All dimensions are in inches (millimeters).
SMT SOLDERING INFORMATION
The surface mount versions of the HL01RZC series are designed for SMT reflow soldering.
During this standard process devices should be heated at a rate not to exceed 3 degrees C per second. The peak reflow
temperature is 260 degrees C. The device should not be exposed to the peak temperature ±10 degrees C for more than
12 seconds. The cool down rate for this device should not exceed 3 degrees C per second.
THROUGH-HOLE SOLDERING INFORMATION
These devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave
temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity
of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed
175°C. Care should be taken to control manual soldering limits identical to that of wave soldering.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: [email protected] ISO 9001 and 14001 REGISTERED
05/22/09
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2009 Murata Power Solutions, Inc.
05/22/09
www.murata-ps.com
USA:
Mansfield (MA), Tel: (508) 339-3000, email: [email protected]
Canada:
Toronto, Tel: (866) 740-1232, email: [email protected]
UK:
Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected]
France:
Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected]
Germany:
München, Tel: +49 (0)89-544334-0, email: [email protected]
Japan:
Tokyo, Tel: 81-3-3779-1031, email: [email protected]
Kyoto, Tel: 81-75-955-7269, email: [email protected]
China:
Shanghai, Tel: +86 215 027 3678, email: [email protected]
Guangzhou, Tel: +86 208 221 8066, email: [email protected]
Singapore:
Parkway Centre, Tel: +65 6348 9096, email: [email protected]
Technical enquiries email: [email protected], tel: +1 508 339 3000
HL01RZC.B03 Page 3 of 3