HL02RZC 2 WATT REGULATED DC/DC CONVERTER FEATURES OBSOLETE PRODUCT N LOW COST N INTERNAL FILTERING Contact Factory for Replacement Model SURFACE MOUNT CONSTRUCTION N N TEMPERATURE RANGE: -25°C TO +70°C N INDUSTRY STANDARD PINOUT N ROHS COMPLIANT DESCRIPTION The HL02RZC Series offers an extensive selection of input and output voltage combinations to choose from. These miniature, regulated DC/DC converters come in 24 pin DIP and SMD packages. This small size is possible through the use of surface mount manufacturing technologies. The HL02RZC Series utilizes a 110 KHz push-pull oscillator in the input stage with low-drop regulators on the outputs, reducing the output noise and maintaining good efficiency. The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................1.5W Short Circuit Duration.............................................................30 Sec Lead Temperature (soldering, 10 seconds max)................+300°C * *Note: Refer to Reflow Profile for SMD Models. HL02R xxyzz Z Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant C TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. RECOMMENDED LAND PATTERN 0.100" (2.54) EFFICIENCY vs LOAD 100% Efficiency 2423 22 1514 13 0.080" (2.03) 0.730" (18.54) 50% 0.040" (1.02) 1 2 3 10 11 12 1.150" (29.21) 0% 0% 25% 50% 75% 100% Load For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries email: [email protected], tel: +1 508 339 3000 TDC_HL02RZC.B02 Page 1 of 3 HL02RZC 2 WATT REGULATED DC/DC CONVERTER ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE RATED OUTPUT VOLTAGE RATED OUTPUT CURRENT (VDC) (VDC) (mA) (mA) HL02R05S05ZC HL02R05S12ZC HL02R05S15ZC 5 5 5 5 12 15 400 166 134 70 70 70 640 580 580 62 69 69 HL02R12S05ZC HL02R12S12ZC HL02R12S15ZC 12 12 12 5 12 15 400 166 134 40 40 40 280 250 250 60 67 67 HL02R15S05ZC HL02R15S12ZC HL02R15S15ZC 15 15 15 5 12 15 400 166 134 30 30 30 230 200 200 58 67 67 HL02R24S05ZC HL02R24S12ZC HL02R24S15ZC 24 24 24 5 12 15 400 166 134 15 15 15 135 120 120 62 67 67 HL02R05D12ZC HL02R05D15ZC 5 5 ±12 ±15 ±83 ±67 70 70 640 640 62 62 HL02R12D12ZC HL02R12D15ZC 12 12 ±12 ±15 ±83 ±67 40 40 270 270 62 62 HL02R15D12ZC HL02R15D15ZC 15 15 ±12 ±15 ±83 ±67 30 30 220 220 61 61 HL02R24D12ZC HL02R24D15ZC 24 24 ±12 ±15 ±83 ±67 15 15 135 135 62 62 TYP MAX UNITS 5 12 15 24 30 5.25 12.6 15.75 25.2 100 VDC VDC VDC VDC mAp-p MODEL INPUT CURRENT MIN LOAD RATED LOAD (mA) EFFICIENCY (%) Note: Other input to output voltages may be available. Please contact factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range MIN 4.75 11.4 14.25 22.8 Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise 5V Output -- Singles Only Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign TEMPERATURE Specification Operation Storage www.murata-ps.com 60 Hz, 10 Seconds 500 500 VDC Vpk G7 pF μArms 1 25 2 VISO= 240VAC, 60Hz 2 ±0.5 ±0.02 25 10 250 ±0.5 ±0.5 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load Circuit Stress Method TA = +25°C TA = +70°C -25 -40 -40 ±5 100 350 ±1 ±1 W % %/°C mVp-p mVrms mVp-p % % 110 12 kHz g 1100 20 kHr kHr +70 +85 +110 °C °C °C Technical enquiries email: [email protected], tel: +1 508 339 3000 TDC_HL02RZC.B02 Page 2 of 3 HL02RZC 2 WATT REGULATED DC/DC CONVERTER MECHANICAL Package/Pinout "Z" TOP VIEWS HL02RxxyzzZC SIDE VIEWS END VIEWS SMD PACKAGE NU = Do Not Use. NC = No Internal Connection. PIN CONNECTIONS Duplicate pin functions are internally connected. PIN# All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. Pin base metal is phosphor bronze. Pin finish is matte tin (100-300 microinches) over a nickel barrel layer (5-40 microinches). SINGLES DUALS 1 2 3 +VIN NU NU +VIN -VOUT Common 10 11 12 -VOUT +VOUT -VIN Common +VOUT -VIN 13 14 15 -VIN +VOUT -VOUT -VIN +VOUT Common 22 23 24 NU NU +VIN Common -VOUT +VIN SMT SOLDERING INFORMATION The surface mount versions of the HL02RZC series are designed for SMT reflow soldering. During this standard process devices should be heated at a rate not to exceed 3 degrees C per second. The peak reflow temperature is 260 degrees C. The device should not be exposed to the peak temperature ±10 degrees C for more than 12 seconds. The cool down rate for this device should not exceed 3 degrees C per second. USA: Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: [email protected] ISO 9001 REGISTERED 10/10/08 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. 05/02/08 www.murata-ps.com Mansfield (MA), Tel: (508) 339-3000, email: [email protected] Canada: Toronto, Tel: (866) 740-1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected] Technical enquiries email: [email protected], tel: +1 508 339 3000 TDC_HL02RZC.B02 Page 3 of 3