ctpc3010f

Power Inductors - Shielded
CTPC3010F
Series
From 1.0 µH to 22 µH
www.ctparts.com
SPECIFICATIONS
Part numbers indicate available inductance tolerance:
M = ±20%, N = ±30%
Part
Inductance
Number
Marking
(µH)
L Test
Freq.
(KHz)
DCR
(mΩ)
IDC1
IDC2
±20%
(A)
(A)
CTPC3010F-1R0N
CTPC3010F-1R2N
CTPC3010F-1R5N
CTPC3010F-2R2N
CTPC3010F-3R3N
CTPC3010F-3R9N
CTPC3010F-4R7M
CTPC3010F-5R6M
CTPC3010F-6R8M
CTPC3010F-8R2M
A
B
C
E
G
H
I
J
K
L
1.0
1.2
1.5
2.2
3.3
3.9
4.7
5.6
6.8
8.2
100
100
100
100
100
100
100
100
100
100
64
72
86
120
170
200
250
300
350
400
1.50
1.30
1.10
0.95
0.80
0.70
0.65
0.60
0.55
0.50
1.70
1.60
1.45
1.25
1.00
0.90
0.85
0.78
0.70
0.65
CTPC3010F-100M
CTPC3010F-150M
CTPC3010F-220M
M
O
Q
10.0
15.0
22.0
100
100
100
490
680
1000
0.45
0.38
0.33
0.60
0.50
0.40
PHYSICAL DIMENSIONS
Size A
B
C
mm
inches
Not Shown at Actual Size
Typ.
E
Typ.
2.9±0.2
1.0
1.5
0.76
1.2
0.7
0.04
0.06
0.03
0.05
0.03
D
F
Powder Coating
E
C
B
G
Typ.
0.11 ± 0.008
E
E
F
Typ.
A
CHARACTERISTICS
G
Marking
PAD LAYOUT
Unit: mm
3.2
3.4
OR
3.3
1.6
Description: SMD Shielded Power Inductor
Applications: Mainly used as a power source inductor for mobile
phones, HDDs, LCD panels and DSCs.
Operating Temperature: -40°C to +105°C (includes self temp.
rise)
IDC1: Based on inductance change (DL/L0: < 30%) at ambient
temp. 25°C
IDC2: Based on temperature rise (DT: 40°C Typ.)
Rated Current: IDC1 or IDC2, whichever value is lower.
Resistance to Solder Heat: 260°C 10 secs.
Inductance Tolerance: ±20%, ±30%
Testing: Inductance is tested on an HP4284A at 100KHz, 0.1V
Packaging: Tape & Reel
Marking: Parts are marked with letter identifier.
Miscellaneous: RoHS Compliant.
Additional Information: Additional electrical & physical
information available upon request.
Samples available. See website for ordering information.
3.0±0.2
0.12±0.008
D
Max.
1.4
0.6
Manufacturer of Passive Components
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2010 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
REV 05.11.10