Blue Power Charger Series W AT E R R E S I S TA N T I P 6 5 B AT T E R Y C H A R G E R FEATURES • • • • • • • • • • • • • 12V and 24V 100W to 200W battery charger Water and dust and chemical resistant (IP65) No fan or other moving parts Ultra low energy consumption (94% efficient) Short circuit protection Overheat protection Reverse polarity protection Fully discharged (dead battery) recovery function Multiple battery life enhanced features Advanced 7 step charging Automatic temperature compensation Special charge algorithm for Li-Ion batteries Automatic storage mode SPECIFICATIONS INPUT Input voltage STATUS INDICATORS 180-264Vac Test LED OUTPUT Charge voltage 'Absorption' Charge voltage 'Float' Charge voltage 'Storage' Charge current 12V 7/15A Normal: 14.4V High: 14.7V Li-ion: 14.2V Normal: 13.8V High: 13.8V Li-ion: 13.5V Normal: 13.2V High: 13.2V Li-ion: 13.5V 7 / 15A 24V 8A Normal: 28.8V High: 29.4V Li-ion: 28.4V Normal: 27.6V High: 27.6V Li-ion: 27.0V Normal: 26.4V High: 26.4V Li-ion: 27.0V 8A High LED Normal LED Absorption LED Will indicate mains cable is connected to the wall socket When voltage has reached 14.7V (12V), or 29.4V (24V) LED switches ON When voltage has reached 14.4V (12V), or 28.8V (24V) LED switches ON When battery is about 80% charged and ready for use when the absorption LED switches ON Reconditioning LED Will flash during reconditioning Float Mode LED Battery is fully charged when ON Storage Mode LED Battery is fully charged when ON Li-Ion LED When in LI-ion battery charge model ON Low current mode 2 / 4A 3A STANDARDS AND APPROVALS Temperature compensation 16mV/°C 32mV/°C Safety EN60335.1, EN60335-2-29 Can be used as a power supply Emission EN55014-1, EN61000-6-3, EN61000-3-2 0.7Ah/month (1mA) Immunity EN55014-2, EN61000-6-1, EN61000-6-2, EN61000-3-3 Power supply Back current drain Standby Power Consumption 0.5W Efficiency 94% MECHANICAL 230Vac Connection Cable of 1.5meters with AS/NZ3112 plug Battery Connection Black and red cable of 1.5meters with 20A DC connector, clamps and M8 eyelets Protection category IP65 (splash and dust proof) Dimensions 12/7: 47x95x190mm 12/15: 60x105x190mm 24/8: 60x105x190mm Weight 0.9kg ENVIRONMENTAL Operating Temperature Cooling Humidity -30°C to +50°C, Full rated output to 30°C, Derate 2.5%/°C to 50°C convection cooled Max 95% non-condensing Doc. No. Blue Charger Rev.A 19-10-15 Blue Power Charger Series W AT E R R E S I S TA N T I P 6 5 B AT T E R Y C H A R G E R TECHNICAL ILLUSTRATIONS Doc. No. Blue Charger Rev.A 19-10-15 Powering Progress – www.powerbox.com.au