UNISONIC TECHNOLOGIES CO., LTD BT152 Preliminary SCR THYRISTOR DESCRIPTION The UTC BT152 is a thyristor, it uses UTC’s advanced technology to provide customers with high bidirectional blocking voltage capability and high thermal cycling performance, etc. The UTC BT152 is suitable for motor control, industrial, static switching, heating and domestic lighting, etc. FEATURES * High bidirectional blocking voltage capability * High thermal cycling performance SYMBOL A K G ORDERING INFORMATION Ordering Number Lead Free Halogen Free BT152L-x-TA3-T BT152G-x-TA3-T BT152L-x-TF3-T BT152G-x-TF3-T Note: Pin Assignment: K: Cathode A: Anode BT152L-x-TA3-T Package TO-220 TO-220F G: Gate Pin Assignment 1 2 3 K A G K A G (1)Packing Type (1) T: Tube (2)Package Type (2) TA3: TO-220, TF3: TO-220F (3)Peak Voltage (3) 4: 450V, 6: 650V, 8: 800V (4)Lead Free (3) L: Lead Free, G: Halogen Free Packing Tube Tube MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R301-019.b BT152 Preliminary SCR ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT 450 V BT152-4 Repetitive Peak Off-State Voltages BT152-6 VDRM, VRRM 650 V BT152-8 800 V Average On-State Current Half Sine Wave, TMB≤103˚C IT(AV) 13 A RMS On-State Current All Conduction Angles IT(RMS) 20 A Non Repetitive Surge Peak On-State t=10ms 200 A Current (Half Sine Wave; TJ=25˚C Prior ITSM t=8.3ms 220 A to Surge) 2 2 I t Value for Fusing t=10ms It 200 A2s Repetitive Rate of Rise of On-State ITM=50A, IG=0.2A, dIT/dt 200 A/µs Current After Triggering dIG/dt=0.2A/μs Peak Gate Current IGM 5 A Peak Gate Voltage VGM 5 V Peak Reverse Gate Voltage VRGM 5 V Peak Gate Power PGM 20 W Average Gate Power Dissipation Over Any 20ms Period PG(AV) 0.5 W Operating Junction Temperature TJ 125 °C Storage Junction Temperature TSTG -40~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL RESISTANCES PARAMETER Junction to Ambient In Free Air Thermal Resistance Junction to Mounting Base MIN TYP 60 MAX 1.1 UNIT K/W K/W STATIC CHARACTERISTICS (TJ=25˚C unless otherwise stated) PARAMETER Gate Trigger Current Latching Current Holding Current On-State Voltage Gate Trigger Voltage Off-State Leakage Current SYMBOL θJA θJMB SYMBOL IGT IL IH VT VGT ID IR TEST CONDITIONS VD=12V, IT=0.1A VD=12V, IGT=0.1A VD=12V, IGT=0.1A IT=40A VD=12V, IT=0.1A VD=VDRM(max), IT=0.1A, TJ=125˚C VD=VDRM(max), VR=VRRM(max), TJ=125˚C MIN TYP 3 25 15 1.4 0.6 0.4 0.2 0.2 MAX UNIT 32 mA 80 mA 60 mA 1.75 V 1.5 V V 1.0 mA 1.0 mA MIN TYP MAX UNIT 200 300 V/μs 2 μs 70 μs 0.25 DYNAMIC CHARACTERISTICS (TJ=25˚C unless otherwise stated) PARAMETER Critical Rate of Rise of Off-State Voltage SYMBOL dVD/dt Gate Controlled Turn-On Time tGT Circuit Commutated Turn-Off Time tQ TEST CONDITIONS VDM=67%VDRM(max), TJ=125˚C, Exponential Waveform Gate Open Circuit VD=VDRM(max), IG=0.1A, dIG/dt=5A/μs, I5TM=40A ITM=50A, VR=25V, dITM/dt=30A/μs, dVD/dt=50V/μs, RGK=100Ω UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R301-019.b BT152 Preliminary SCR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R301-019.b