2SA1036K Transistors Medium Power Transistor 2SA1036K zExternal dimensions (Unit : mm) zFeatures 1) Large IC. ICMAX. = -500mA 2) Low VCE(sat). Ideal for low-voltage operation. 3) Complements the 2SC2411K. 2SA1036K 2.9±0.2 1.9 ±0.2 1.1 +0.2 -0.1 ± 0.8± 0.1 0.95 0.95 zStructure Epitaxial planer type PNP silicon transistor 2.8± 0.2 (2) 1.6 +0.2 -0.1 (1) 0~0.1 0.4 +0.1 -0.05 All terminals have same dimensions 0.15 +0.1 -0.06 0.3~0.6 (3) (1) Emitter (2) Base (3) Collector ROHM : SMT3 EIAJ : SC-59 Abbreviated symbol : H ∗ ∗ Denotes hFE zAbsolute maximum ratings (Ta=25°C) Parameter Symbol Limits Unit Collector-base voltage VCBO −40 V Collector-emitter voltage VCEO −32 V Emitter-base voltage VEBO −5 V Collector current IC −0.5 A Collector power dissipation PC 0.2 W Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C ∗ ∗ PC MAX. must not be exceeded. Rev.A 1/3 2SA1036K Transistors zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Collector-base breakdown voltage BVCBO −40 − − V IC= −100µA Collector-emitter breakdown voltage BVCEO −32 − − V IC= −1mA Emitter-base breakdown voltage BVEBO −5 − − V IE= −100µA Collector outoff current ICBO − − −1 µA VCB= −20V Emitter cutoff current IEBO − − −1 µA VEB= −4V VCE(sat) − − −0.6 V IC/IB= −300mA/−30mA hFE 82 − 390 − VCE= −3V, IC= −100mA Transition frequency fT − 200 − MHz Output capacitance Cob − 7 − pF Collector-emitter saturation voltage DC current transfer ratio Conditions VCE= −5V, IE=20mA, f=100MHz VCB= −10V, IE=0A, f=1MHz zPackaging specifications Package Type hFE 2SA1036K PQR Taping Code T146 Basic ordering unit (pieces) 3000 hFE values are classifies as follows. Item P Q R hFE 82 to 180 120 to 270 180 to 390 zElectrical characteristic curves VCE=-3V -20 -10 -5 -2 -1 -0.5 -0.2 -0.1 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0 -2.2 -100 -500 -0.9mA Ta=25 C -1mA -0.8mA -80 -0.7mA -0.6mA -60 -0.5mA -0.4mA -40 -0.3mA -0.2mA -20 -0.1mA 0 IB=0A 0 -1 -2 -3 -4 -5 COLLECTOR CURRENT : IC (mA) -200 Ta=100 C 25 C -100 -55 C -50 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) -500 Ta=25 C -5.0mA -4.5mA -4.0mA -3.5mA -3.0mA -2.5mA -2.0mA -400 -300 -200 -1.5mA -1.0mA -100 0 -0.5mA IB=0A 0 -5 -10 BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.1 Grounded emitter propogation Fig.2 Grounded emitter output characteristics ( Ι ) Fig.3 Ground emitter output characteristics ( ΙΙ ) Rev.A 2/3 2SA1036K 1000 500 VCE=-5V -3V -1V 200 100 50 20 -1 -2 -5 -10 -20 500 Ta=100 C 200 -0.3 -0.2 -0.1 Ta=100 C 25 C -0.05 -55 C -0.03 -0.02 -0.01 -1 -2 -5 -10 -20 -50 -100 -200 -500 -1000 COLLECTOR CURRENT : IC (mA) Fig.7 Collector-emitter saturation voltage vs. collector current ( ΙΙ ) -2 -5 -10 -20 -50 -100 -200 -500 -1000 -0.5 -0.2 -0.1 IC/IB=50 -0.05 20 10 -0.02 -1 -2 1000 500 200 100 50 1 2 5 10 20 EMITTER CURRENT : IE (mA) Fig.8 Gain bandwidth product vs. emitter current -50 -100 -200 -500 Fig.6 Collector emitter saturation voltage vs. collector current ( Ι ) Ta=25 C VCE=-5V 0.5 -5 -10 -20 COLLECTOR CURRENT : IC (mA) Fig.5 DC current gain vs. collector current ( ΙΙ ) TRANSITION FREQUENCY : fT (MHz) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) -0.5 -1 Ta=25 C -1 COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current ( Ι ) lC/lB=10 -55 C 50 COLLECTOR CURRENT : IC (mA) -1.0 25 C 100 20 -50 -100 -200 -500 -1000 VCE=-3V 50 COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) Ta=25 C DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE 1000 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Transistors Ta=25 C f=1MHz IE=0A IC=0A 100 50 20 10 5 2 -0.5 -1 -2 -5 -10 -20 -50 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.9 Collectur output capacitance vs. collector-base voltage. Emitter input capacitance vs. emitter -base voltage Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1