1882

NTE1882
Integrated Circuit
Module – AF Power Amp,
100W Min, Dual Power Supplies
Features:
D Compact packaging supports slimmer set designs
D Simpler heat sink design facilitates thermal design of slim stereo sets
D Current mirror circuit application reduces distortion to 0.08%.
D Supports addition of electronic circuits for thermal shutdown and load–short protection circuit
as well as pop noise muting which occurs when the power supply switch is turned on and off
Absolute Maximum Ratings: (TA = ±25°C unless otherwise specified)
Maximum Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±73V
Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1°C/W
Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Operating Substrate Temperature, TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +125°C
Available Time for Shorted Load (VCC = ±51V RL = 8Ω, f = 50Hz, PO = 100W), ts . . . . . . . . . 1sec
Recommended Operating Conditions: (TA = ±25°C unless otherwise specified)
Recommended Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±51V
Load Resistance, RL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Ω
Operating Characteristics: (TA = ±25°C, VCC = ±51V, RL = 8Ω, VG = 40dB, Rg = 600Ω,
100k LPF ON, RL (non–inductive)
Parameter
Quiescent Current
Output Power
Symbol
ICCO
PO
Test Conditions
Min
Typ
Max
Unit
VCC = ±61V
15
–
120
mA
THD = 0.08%, f = 20Hz to 20kHz
100
–
–
W
Total Harmonic Distortion
THD
PO = 1.0W, f = 1kHz
–
–
0.08
%
Frequency Response
fL, fH
PO = 1.0W, +0dB, –3dB
–
20 to 50k
–
Hz
PO = 1.0W, f = 1kHz
–
55
–
kΩ
VCC = ±61V, Rgm = 10kΩ
–
–
1.2
mVrms
–70
0
70
mV
Input Resistance
Output Noise Voltage
Midpoint Voltage
ri
VNO
VN
VCC = ±61V
Note 1 Output noise voltage represents the peak value on the rms scale (VTVM). The noise voltage waveform does not include the pulse noise.
Pin Connection Diagram
(Front View)
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Bootstrap
V (+)
Output
V (–)
Compensation
IAdjust
Emitter Bypass
Compensation
IAdjust
Test Point
Bypass
Bias
Substrate
NFB
Input
2.520 (64.0)
2.190 (55.6)
.334 (8.5)
1.440
(36.4)
.737
(18.7)
1
15
.141 (3.6)
Dia (2 Holes)
.100 (2.54)
1.400 (35.56)
.020(.508)