DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-04563
1/3
2015-10-07
Certificate Holder
SL POWER ELECTRONICS CORP
BLDG A
6050 KING DR
VENTURA CA 93003 USA
Manufacturer
SL POWER ELECTRONICS CORP
BLDG A
6050 KING DR
VENTURA CA 93003 USA
Production site
INDUSTRIAS S L S A DE C V
CIRCUITO SIGLO XXI 2055 COL PARQUE INDUSTRIAL EX-XXI
21254 MEXICALI BC
MEXICO
See Page 2
Certified Product
Model
Trademark
Rated Voltage / Frequency
Rated Current / Power
Insulation Class
Degree of protection (IP)
Tested acc. to
Test Report No.
Additional
Expire date
Certification Manager
Jan-Erik Storgaard
Certification Body
Power Supply
AU300SXXYWW, AU425SXXYWW
See Page 2
SL Power Electronics Corp.
Input: 100-240 Vac, 50-60 Hz
Input: 4.5A
Class I (earthed)
IP X0
EN 60950-1:2006/A11:2009, EN 60950-1:2006/A12:2011, EN
60950-1:2006/A1:2010, EN 60950-1:2006/A2:2013, EN 609501:2006
E135803-A74-CB-2 issued on 2015-09-29
See Page 2 for Output ratings
2025-10-06
This is to certify that representative sample(s) of the Product described herein ("Certified Product") have
been investigated and found in compliance with the Standard(s) indicated on this Certificate, in
accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the d or
for cables <DEMKO> for the Certified Product manufactured at the production site(s) identified above, in
accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and
Certification Services Service Terms. Only those Products bearing the D Mark should be considered as
being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date,
unless terminated earlier in accordance with the Service Agreement including without limitation if the
Standard identified on this Certificate is amended or withdrawn prior the expiration date.
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65,
[email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
D-04563
2/3
2015-10-07
Model Details:
AU300SXXYWW, AU425SXXYWW; Where A can be T or L, XX represents output voltage which may be
any number from 12 to 56, Y can be A-Z or blank (for Class I construction), WW may be any number
from 00 to 99 or blank, designates additional configurations indicating non-safety related options.
Production Sites:
SL XIANGHE POWER ELECTRONICS CORP
NO. B-02-03, NORTH SIDE OF LANDSCAPE AVE, QIBU DISTRICT, ENVIRONMENTAL INDUSTRIAL PARK
XIANGHE HEBEI 065400
CHINA
External Certification Information:
US-26118-UL dated 2015-10-06 issued by UL (US)
Additional Information:
Output:
For AU425SXXYWW and AU300SXXYWW with convection cooled, total max. 300W
Main output: 12 Vdc/22.0 A to 23.9Vdc/11.05A, 24Vdc/11.9A to 56Vdc/5.1A
Standby output: 5Vdc/2.0A
Fan output: 12Vdc/0.5A
For AU425SXXYWW with airflow of Min. 32CFM(200LFM), total max. 425W
Main output: 12 Vdc/32.2 A to 23.9Vdc/16.15A, 24Vdc/16.8A to 56Vdc/7.2A
Standby output: 5Vdc/2.0A
Fan output: 12Vdc/1.0A
This certificate replaces the certificate No. D-03135-A1 dated 2015-02-03 due to standard upgrade.
Certification Body
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com
Appendix DEMKO CERTIFICATE
Certificate No.
Page
Date of Issue
Certification Body
D-04563
3/3
2015-10-07
UL International Demko A/S, Borupvang 5A, DK-2750
Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
www.ul-europe.com