RR264M-400 Diodes Rectifying diode RR264M- 400 zApplications General rectification zDimensions (Unit : mm) zLand size figure (Unit : mm) 0.1±0.1 0.05 1.2 0.85 1.6±0.1 2.6±0.1 ① 3.5±0.2 3.05 zFeatures 1) Small power mold type. (PMDU) 2) High reliability. PMDU zConstruction Silicon diffused junction zStructure 0.9±0.1 0.8±0.1 ROHM : PMDU JEDEC :SOD-123 Manufacture Date zTaping dimensions (Unit : mm) 4.0±0.1 1.81±0.1 8.0±0.2 3.5±0.05 φ1.55±0.05 φ1.0±0.1 3.71±0.1 0.25±0.05 1.75±0.1 2.0±0.05 4.0±0.1 1.5MAX zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage(DC) Forward current(DC) Average rectified forward current(*1) Forward current surge peak （60Hz・1cyc） Junction temperature Storage temperature Limits 400 1 0.7 25 150 -55 to +150 Symbol VR IF Io IFSM Tj Tstg (*1)Mounting on epoxy board. 180°Half sine wave Unit V A A A ℃ ℃ zElectrical characteristics (Ta=25°C) Param eter Sym bol Min. Typ. Max. Unit Forward voltage VF - - 1.1 V IF =0.7A Conditions Revers e current IR - - 10 uA VR =400V Rev.D 1/3 RR264M-400 Diodes zElectrical characteristic curves (Ta=25°C) Ta=75℃ Ta=125℃ 0.1 Ta=25℃ Ta=150℃ Ta=-25℃ 0.01 100 CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(A) 1 100000 Ta=150℃ 10000 1000 Ta=125℃ Ta=75℃ 100 Ta=25℃ 10 Ta=-25℃ f=1MHz 10 1 0.1 0.001 0 200 400 600 800 1000 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 0 1200 1 400 0 REVERSE CURRENT:IR(nA) 960 950 940 AVE:940.7mV 930 400 350 50 AVE:44.0A 0 150 AVE:34.13nA 100 90 AVE:99.5pF 80 70 50 60 0 50 Ct DISPERSION MAP 100 Ta=25℃ IF=0.1A IR=0.1A Irr=0.1*IR n=10pcs 4900 4890 4880 4870 4860 4850 AVE:4860ns 4840 4830 Ifsm 8.3ms 8.3ms 1cyc 50 4820 1000 0 1 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) IM=10mA 0 Rth(j-a) 100 100 1ms DC time 300us Rth(j-c) 10 1 0.001 100 1.5 IF=0.5A 0.1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS Mounted on epoxy board FORWARD POWER DISSIPATION:Pf(W) 100 1 Ta=25℃ f=1MHz VR=0V n=10pcs trr DISPERSION MAP 50 30 100 200 IFSM DISPERSION MAP t 25 110 250 4810 Ifsm 20 120 300 PEAK SURGE FORWARD CURRENT:IFSM(A) 8.3ms 8.3ms RESERVE RECOVERY TIME:trr(ns) 1cyc 1cyc 15 130 4910 IfsmIfsm 10 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 140 IR DISPERSION MAP 150 100 5 150 Ta=25℃ VR=400V n=30pcs 450 VF DISPERSION MAP PEAK SURGE FORWARD CURRENT:IFSM(A) 300 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25℃ IF=0.7A n=30pcs 920 PEAK SURGE FORWARD CURRENT:IFSM(A) 200 500 970 FORWARD VOLTAGE:VF(mV) 100 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS D=1/2 1 Sin(θ＝180) 0.5 0 0.01 0.1 1 10 TIME:t(s) Rth-t CHARACTERISTICS 100 1000 0 0.5 1 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 1.5 Rev.D 2/3 RR264M-400 Diodes AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 2 REVERSE POWER DISSIPATION:PR (W) 0.008 t 1.5 0.006 Sin(θ＝180) D=1/2 0.004 DC DC 1 0 0 100 200 300 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 400 T VR D=t/T VR=15V Tj=125℃ D=1/2 0.5 0.002 2 Io Io 0A0 0V0 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0.01 Sin(θ＝180) 0A 0V 1.5 T DC 1 Io t VR D=t/T VR=15V Tj=125℃ D=1/2 0.5 Sin(θ＝180) 0 0 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 150 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) ELECTROSTATIC DISCHARGE TEST ESD(KV) 30 25 AVE:28.4kV 20 15 10 5 AVE:6.90kV 0 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP Rev.D 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0