File E116994
Project 06CA58325
January 03, 2007
REPORT
ON
COMPONENT - POWER SUPPLIES
MEDICAL AND DENTAL POWER SUPPLY
SL Power Electronics Corp.
Ventura, California
Copyright © 2007 Underwriters Laboratories Inc.
Underwriters Laboratories Inc. authorizes the above named company to reproduce
this Report provided it is reproduced in its entirety.
Underwriters Laboratories Inc. authorizes the above named company to reproduce
that portion of this Report consisting of this Cover Page through Page 4.
File E116994
Vol. 1
Sec. 82
and Report
Page 1
Issued: 2007-01-03
DESCRIPTION
PRODUCT COVERED:
USR/CNR - Component Switching Power Supply Models GPM80A, GPM80B,
GPM80C, GPM80D, GPM80E, GPM80P, GPM80-5, -12, -15, -24, -28, MSP1612, and
MSP1766. Models GPM80 Series, MSP1612, and MSP1766 may be followed by
suffixes: -L, -LC, -XXX and/or G. Suffix –L indicates chassis; -LC indicates
chassis and cover; -XXX indicates value added configurations that have no
impact on safety which may be any number from 001 thru 999; and G indicates
compliance to RoHS. (RoHS compliance has not been evaluated by UL.)
ELECTRICAL RATINGS:
Input - 100-240 V ac, 50/60 Hz, 3.2 A.
Output Model
GPM80A
GPM80B
GPM80C
GPM80D
GPM80E
GPM80P
GPM80-5
GPM80-12
GPM80-15
GPM80-24
GPM80-28
MSP1612,
MSP1766
V1
A1
V2
+5 V dc
+5 V dc
+5 V dc
+5 V dc
+5 V dc
+5 V dc
+5 V dc
+12 V dc
+15 V dc
+24 V dc
+28 V dc
12 A
12 A
12 A
12 A
12 A
12 A
16 A
6.7 A
5.3 A
3.4 A
2.9 A
+12
+12
+12
+24
+24
+24
+5 V dc
12 A
+12 V dc
Note:
V
V
V
V
V
V
A2
dc
dc
dc
dc
dc
dc
V3
3 A
3 A
3 A
2 A
2 A
3.5 A
-12
-12
-15
-12
-15
-12
V
V
V
V
V
V
dc
dc
dc
dc
dc
dc
3 A
-12 V dc
A3
V4
A
A
A
A
A
A
+12 V dc
-5 V dc
+15 V dc
+12 V dc
+15 V dc
+12 V dc
1
1
1
1
1
2
1 A
+12 V dc
1 A
1
1
1
1
1
1
See ILL. 2 for additional ratings with airflow.
A4
A
A
A
A
A
A
File E116994
Vol. 1
Sec. 82
and Report
Page 2
Issued:
2007-01-03
ENGINEERING CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE'S USE):
For use in product where the acceptability of the combination is
determined by Underwriters Laboratories Inc.
USR indicates that the product was evaluated to the First Edition of the
Standard For Medical Electrical Equipment, Part 1:
General Requirements for
Safety, UL 60601-1.
CNR indicates that the product was evaluated to the Standard For Medical
Electrical Equipment, Part 1: General Requirements for Safety, CSA C22.2, No.
601.1-M90.
Engineering References
engineering references:
–
Following
Ill. 1 – Insulation Diagram
Ill. 2 – Installation Instructions
Illustrations
are
provided
for
File E116994
Vol. 1
Sec. 82
and Report
Page 3
Issued:
2007-01-03
Conditions of Acceptability - When installed in the end-use equipment,
the following are among the considerations to be made:
1.
The power supplies have been judged on the basis of the required
spacings in the First Edition of the Standards for Medical Electrical
Equipment, Part 1: General Requirements for Safety, UL 60601-1 and CSA
C22.2 No. 601.1-M90, which covers the end use product for which the
component is designed.
2.
The device shall be installed in compliance with the enclosure,
mounting, spacing, casualty markings, and segregation requirements of
the end-use application.
3.
The Temperature Test was performed at an ambient of 50°C.
Consideration should be given to measuring the temperature on power
electronic components and transformer windings when the power supply is
installed in the end-use equipment. All transformers comply with Class
155 limits.
4.
The input and output connectors are not acceptable for field
connections; they are only intended for connection to mating connectors
of internal wiring inside the end-use machine. The acceptability of
these in the mating connectors relative to secureness, insulating
materials, and temperature shall be considered.
5.
The power supply should be properly bonded to ground in the end-use
product.
6.
The power supply has been evaluated for patient care equipment, but not
patient connected.
7.
The output circuits have not been evaluated for direct patient
connection (Type B, BF, or CF).
8.
The end use product shall ensure that the power supplies are used
within their ratings with the appropriate cooling, see ILL. 4.
9.
The GPM80 Series, MSP1612 and MSP1766 power supplies have been
evaluated to operate in a 50 °C ambient with the following maximum
output loading conditions:
a.
40 Watts with convection cooling, with cover and chassis.
b.
80 Watts with convection cooling.
c.
90 Watts with 26 CFM cooling, with cover and chassis.
d.
110 Watts with 26 CFM cooling.
File E116994
Vol. 1
Sec. 82
and Report
Page 4
Issued:
2007-01-03
10.
Leakage current testing should be repeated in the end product
application.
11.
The power supplies were evaluated as Reinforced insulation between
primary and secondary; basic insulation between primary to ground; and
operational insulation only between secondary to ground.
12.
The power supplies have been evaluated as Class I, continuous
operation, ordinary equipment and has not been evaluated for use in the
presence of a flammable anaesthetic mixture with air, oxygen, or
nitrous oxide.
13.
Fusing in the end product shall be considered since only one UL Listed
fuse rated 3.5 A, 250 V, fast-blow is provided in the hot side of the
input supply circuit.
14.
The outputs of the power supplies do not exceed 25 V ac or 60 V dc
under normal and single fault conditions.
Certificate of Compliance
Certificate:
1166448 (LR 46516C)
Master Contract:
150684
Project:
1728955
Date Issued:
2006/01/17
Issued to:
Condor D.C. Power Supplies Inc.
2311 Statham Pky
Oxnard, CA 93033
USA
Attention: Mr. Ross Sacolles
The products listed below are eligible to bear the CSA Mark shown
Issued by:
Eugen Velea, MASc. E.Eng.
Authorized by: Shane Stevenson, Product
Group Manager
PRODUCTS
CLASS 5311 20
CLASS 5311 07
- POWER SUPPLIES - Component Type - For Use in Medical Equipment
- POWER SUPPLIES - Component Type - (CSA 60950-1-03)
!" # " $ % " $ $ &''&("!" # $ '("&" " (
)") ( &"&!*
+)! , ( +)! ./0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0
<
4 67 15 "$ 48 =+ &"#!30 4 67
1
*4 "$ 48 =+ &"#!30 <
4 67
1
*4 "$ 48
.
DQD 507 Rev. 2004-06-30
Certificate:
1166448 (LR 46516C)
Master Contract:
150684
Project:
1728955
Date Issued:
2006/01/17
=+ &"#!3; &>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &)
'$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./A0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
67 15 "$ 48 =+ &"#!30 4 67
1
*4 "$ 48 =+ &"#!30 67
1
*4 "$ 48 =+ &"#!3;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
67 15 "$ 48 =+ &"#!30 67
1
*4 "$ 48 =+ &"#!30 <
67
1
*4 "$ 48 =+ &"#!3;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./B0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
67 15 "$ 48 =+ &"#!30 4 67
1
*4 "$ 48 =+ &"#!30 <45 674 ; &>" &! "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &)
5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
67
1
*4 "$ 48 =+ &"#!30 67
1
*4 "$ 48 =+ &"#!30 <45 674 ; &>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'"
'!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./
0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0
<
67
1
*4 "$ 48 =+ &"#!30 67
1
*4 "$ 48 =+ &"#!30 <45 674 0 < 67*
; &>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$
'2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
674 0 4 67
1
*4 "$ 48 =+ &"#!30 <45 67* 15* "$ 48=+ &"#!3; &>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'"
'!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 674 ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 8/ "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./
40 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 4 67?*4 ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./
0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 67* ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
DQD 507 Rev. 2004-06-30
Certificate:
1166448 (LR 46516C)
Master Contract:
150684
Project:
1728955
Date Issued:
2006/01/17
+)! ./450 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 45 675*8 ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./4/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 4/ 67*? ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! ./5/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 5/ 674* ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! 5
0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 675 0 67*
0 45 67*4 0 <45 674 *
+)! 5?0 12! 30 " &) 4 60 78 9:0 *4 ; )' &) < 675 0 <
4 67 0 4 67
0
<
4 67
; &>" &! - / *
4 = " +)"'&! % "
!" # " )"'&! % " $ $ "&("!" # $ '("&" " ( )")
( &"&!*
+)! , ( +)! .+/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
67 15 "$ 48 =+ &"#!30 4 67
1
*4 "$ 48 =+ &"#!30 <
4 67
1
*4 "$ 48 =+ &"#!3;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/A0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
67 15 "$ 48 =+ &"#!30 4 67
1
*4 "$ 48 =+ &"#!30 67
1
*4 "$ 48 =+ &"#!3;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
67 15 "$ 48 =+ &"#!30 67
1
*4 "$ 48 =+ &"#!30 <
67
1
*4 "$ 48 =+ &"#!3;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/B0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
67 15 "$ 48 =+ &"#!30 4 67
1
*4 "$ 48 =+ &"#!30 <45 674 ; &>" &! "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &)
5 "$ '2'" '!"@ "$ '$&" &) '2*
DQD 507 Rev. 2004-06-30
Certificate:
1166448 (LR 46516C)
Master Contract:
150684
Project:
1728955
Date Issued:
2006/01/17
+)! .+/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
67
1
*4 "$ 48 =+ &"#!30 67
1
*4 "$ 48 =+ &"#!30 <45 674 ; &>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'"
'!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <
4
674 0 4 67
1
*4 "$ 48 =+ &"#!30 <45 67* 15* "$ 48=+ &"#!3; &>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'"
'!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 674 ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/
40 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 4 67?*4 ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/
0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 67* ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/450 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 45 675*8 ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! .+/4/0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 4/ 67*? ;
&>" &! - "$ 48 =+ &"#!0 ? "$ 48 =+ &"#! "$ '2 &) '$&"0 / "$ '2'" '!"@0 &) 5 "$ '2'" '!"@ "$ '$&" &) '2*
+)! +
50 12! 30 " &) 45 6 1'" 30 78 9:0 4* ; )' &) < 67
4 0 <
67 0 67
0 *4 67
; / &>" &! *
+)! +
840 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) 67
8 ; / &> &! *
+)! +
5
0 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
*4 0 <
67
*4 0 67*80 <48 67*/ ; &>" &! - 5 "$ '2'" '!"@*
+)! +
5/40 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) < 67
4 0 <45
67* 0 4 67
0 <
4 67 ; &>" &! - / "$ =+ &"#!*
+)! +
8
40 +
88 12! 30 " &) 45 6 1'" 30 78 9:0 *4 ; )' &) <
67
4 0 <
4 67 15 "$ 48 =+ &"#!30 4 67
1
*4 "$ 48 =+ &"#!30 <
4 67
1
*4 "$ 48
=+ &"#!3; &>" &! - "$ 48 =+ &"#!0 / "$ '2'" '!"@*
DQD 507 Rev. 2004-06-30
Certificate:
1166448 (LR 46516C)
Master Contract:
150684
Project:
1728955
Date Issued:
2006/01/17
,
* $ )! )"@&" 1>' CCCC &) +CCCC3 & ( #!!) ( & D =D0 DD &)7 DD ##"> ")"'& $ =&"!0 '$&"0 &)7 '$&" "$ '2 " '"2!*
4* +&>" &(" & # '" !") &(2 " E*
APPLICABLE REQUIREMENTS
,744*4 , 8?
&# # #&" '$!@ % "0 & - .&! % "
,744*4 ,* 8
*
+? +)"'&! !'"'&! % "0 & - .&! % " # &#
&)&) 44*4 , +
??
.&! % " &&)"& !'"'&! )0 & *5+
?/4 A)"@ &) . )"@ # !'"'&! % " 1'"2 . )"@3
45+? &# # !"
DQD 507 Rev. 2004-06-30