DSS22 THRU DSS210 Green Products Technical Data Data Sheet N1694, Rev. - DSS22 THRU DSS210 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 100 Volts Forward Current - 2.0 Ampere Features • • • • • The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data • • • • • Case: JEDEC SOD-123FL molded plastic body Terminals: Solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0007 ounce, 0.02 grams Mechanical Dimensions (In Inches/mm) SOD-123FL • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • DSS22 THRU DSS210 Green Products Technical Data Data Sheet N1694, Rev. - Marking Diagram: D22 = Marking code Cautions：Molding resin Epoxy resin UL:94V-0 Ordering Information: Device DSS22 THRU DSS210 Package Shipping SOD-123FL 3000pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • DSS22 THRU DSS210 Green Products Technical Data Data Sheet N1694, Rev. - Absolute Maximum Ratings and Electrical characteristics Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load, for capacitive load, derate by 20 % Characteristic Symbol DSS 22 DSS 23 DSS 24 DSS 25 DSS DSS DSS DSS 26 27 28 29 DSS 210 D22 D23 D24 D25 D26 D29 D210 Marking code D27 D28 Unit Peak Repetitive Reverse Voltage DC Blocking Voltage VRRM VDC 20 30 40 50 60 70 80 90 100 V Maximum RMS voltage VRMS 14 21 28 35 42 49 56 63 70 V Maximum Average Forward Rectified Current Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IF(AV) 2.0 A IFSM 40.0 A Max Instantaneous Forward Voltage at 2A VF Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C IRM Typical Junction Capacitance(Note 1) CJ Typical Thermal Resistance Junction to Ambient (Note 2) RθJA Operating Temperature Range Storage Temperature Range 0.55 0.70 0.85 V 0.5 TJ 10.0 5.0 220 180 TSTG pF °C/W 180 -55 to +125 mA -55 to +150 -55 to +150 Note: 1. Measured at 1MHz and applied reverse voltage of 4V D.C 2. PCB mounted on 0.2 X 0.2" (5.0 X 5.0 mm) copper pad areas. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • °C DSS22 THRU DSS210 Technical Data Data Sheet N1694, Rev. - Green Products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • DSS22 THRU DSS210 Technical Data Data Sheet N1694, Rev. - Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •