SS3L45 Green products Technical Data Data Sheet N1823 Rev. - SS3L45 LOW VF SCHOTTKY RECTIFIER Features: • • • • • For surface mounted application Metal to sillicon rectifier, majority carrier conduction Low forward voltage drop Easy pick and place High surge current capability Mechanical Data • • • • Case: Molded plastic High temperature soldering: 260℃/10 seconds at terminals Polarity: Indicated by cathode band Weight: 0.064 grams Mechanical Dimensions (In Inches/mm) SMAF • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SS3L45 Green products Technical Data Data Sheet N1823 Rev. - Marking Diagram: 3L45 = Part Name Cautions:Molding resin Epoxy resin UL: 94V-0 Ordering Information: Device SS3L45 Package SMAF (Pb-Free) Shipping 3000pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SS3L45 Green products Technical Data Data Sheet N1823 Rev. - Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Symbol Marking Code SS3L45 Unit 3L45 Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage VRRM VDC 45 V Maximum RMS Voltage VRMS 31 V Maximum Average Forward Rectified Current IF(AV) 3.0 A Peak Forward Surge Current 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Method) IFSM 80 A Maximum Instantaneous Forward Voltage(Note1) @ IF = 3.0A VF 0.45 V Maximum DC Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C IR Typical Thermal Resistance Operating Temperature Range Storage Temperature Range 0.2 100 mA RθJL RθJA 17 55 °C/W TJ -55 to +125 °C TSTG -55 to +150 °C Note: 1. Pluse Test with PW=300usec, 1% Duty Cycle • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SS3L45 Technical Data Data Sheet N1823 Rev. - Green products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SS3L45 Technical Data Data Sheet N1823 Rev. - Green products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •