SMDJ SERIES 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Green Products Technical Data Data Sheet N1696, Rev. - SMDJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features: • • • • • • • Glass Passivated Die Construction 3000W Peak Pulse Power Dissipation 5.0V- 170V Standoff Voltage Uni- and Bi-Directional Versions Available High temperature soldering guaranteed: 260°C/40 seconds at terminals Low profile package Plastic Case Material has UL Flammability Classification Rating 94V-O Mechanical Data: • • • • Case: JEDEC DO-214AB Low Profile Molded Plastic Terminals: Solder Plated , Solderable per MIL-STD 750, Method 2026 Polarity: Cathode Band or Cathode Notch Weight:0.21 grams(approx.) Mechanical Dimensions：In Inches(mm) SMC/DO-214AB Dim. Min. Max. Min. Max. A 5.59 6.22 0.220 0.245 B 6.60 7.11 0.260 0.280 C 2.75 3.25 0.108 0.128 D 0.152 0.305 0.006 0.012 E 7.75 8.25 0.305 0.325 F 2.00 2.95 0.079 0.116 G 0.051 0.203 0.002 0.008 H 0.76 1.60 0.030 0.063 In mm In inch SMC • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SMDJ SERIES 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Green Products Technical Data Data Sheet N1696, Rev. - Marking Diagram: Where XXXXX is YYWWL RDE/DDE YY WW L SMDJ5.0A = Part Name = Year = Week = Lot Number SMDJ5.0CA Cautions：Molding resin Epoxy resin UL:94V-0 Ordering Information Device Package SMC (Pb-Free) SMDJ SERIES Shipping 3000pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Parameter Peak Pulse Power Dissipation at TA=25°C by 10x1000μs Waveform (Fig.2)(Note 1), (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient Operating Junction and Storage Temperature Range Symbol Value Unit PPPM 3000 W IFSM 300 A VF 3.5 V RθJL 15 °C/W RθJA 75 °C/W TJ,TSTG -55 to 150 °C Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TA = 25°C per Fig. 3. 2. Mounted on 0.31×0.31”（8.0×8.0mm）to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SMDJ SERIES 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Technical Data Data Sheet N1696, Rev. - Electrical Characteristics For parts without A , the VBR is + 10%, and VC is 5% higher than A parts. For bidirectional type having VR of 10 volts and less, the IR limit is double. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • Green Products SMDJ SERIES 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Green Products Technical Data Data Sheet N1696, Rev. - Fig.1 Peak Pulse Power Rating Fig.3 Peak Pulse Power or Current Derating Curve vs Initial Junction Temperature Fig.2 TVS Transients Clamping Waveform Fig. 4 Pulse Waveform • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SMDJ SERIES 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Green Products Technical Data Data Sheet N1696, Rev. - Fig.5 Typical Junction Capacitance Fig.6 Steady State Power Derating Curve Fig.7 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional only • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SMDJ SERIES 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Technical Data Data Sheet N1696, Rev. - Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •