ABS2 THRU ABS10 N1693 REV.-

ABS2
THRU
ABS10
Green Products
Technical Data
Data Sheet N1693, Rev. -
ABS2 THRU ABS10
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIERS
Voltage Range - 200 to 1000 Volts Current - 0.8/1.0 Ampere
Features:
•
•
•
•
•
•
Ideal for printed circuit board
Reliable low cost construction utilizing molded plastic technique
High temperature soldering guaranteed: 260 /10 seconds at 5 lbs., (2.3kg) tension
Small size, simple installation
High surge current capability
Glass passivated chip junction
Mechanical Data:
•
•
•
•
Case: Molded plastic body
Terminals: Plated leads solderable per MIL-STD-750, Method 2026
Polarity: Polarity symbols marked on case
Mounting Position: Any
Mechanical Dimensions: In Inches/mm
ABS
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
ABS2
THRU
ABS10
Green Products
Technical Data
Data Sheet N1693, Rev. -
Marking Diagram:
Where XXXXX is YYWWL
ABS2
YY
WW
L
= Part Name
= Year
= Week
= Lot Number
Cautions:Molding resin
Epoxy resin UL:94V-0
Ordering Information:
Device
ABS2 THRU ABS10
Package
ABS
(Pb-Free)
Shipping
3000pcs / reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification.
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
ABS2
THRU
ABS10
Green Products
Technical Data
Data Sheet N1693, Rev. -
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified
Single Phase half wave 60Hz, resistive or inductive load. For capacitive load current derate by 20%.
Characteristic
Maximum repetitive peak reverse voltage
RMS Reverse Voltage
Maximum DC blocking voltage
Maximum average forward rectified current
On glass-epoxy P.C.B.(Note1)
On aluminum substrate(Note2)
Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
Symbol
ABS2
ABS4
ABS6
ABS8
ABS10
VRRM
200
400
600
800
1000
VR(RMS)
140
280
420
560
700
VDC
200
400
600
800
1000
Units
V
I(AV)
0.8
1.0
V
IFSM
30
A
Maximum instantaneous forward voltage drop
per leg at 0.4A
VF
0.95
V
Maximum DC reverse current
at rated DC blocking voltage
IR
5
100
µA
RθJL
RθJA
25
80
°C/W
TJ,TSTG
-55 to +150
°C
TA = 25°C
TA = 100°C
Typical thermal resistance (Note 3)
Operating junction and storage temperature
range
Note: 1. On glass epoxy P.C.B. mounted on 0.05x0.05''(1.3x1.3mm) pads
2. On aluminum substrate P.C.B. with on area of 0.8''x0.8''(20x20mm) mounted on 0.05X0.05''(1.3X1.3mm) solder pad
3. Thermal resistance form junction to ambient and junction to lead mounted on P.C.B. with 0.2X0.2''(5X5mm)
copper pads.
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
ABS2
THRU
ABS10
Technical Data
Data Sheet N1693, Rev. -
Green Products
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
ABS2
THRU
ABS10
Technical Data
Data Sheet N1693, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Similar pages