DB151S-DB157S N1476 REV.B

DB151S-DB157S
Green Products
Technical Data
Data Sheet N1476, Rev. B
DB151S-DB157S
Single-Phase Glass Passivated Bridge Rectifiers
Features:
•
•
•
•
•
•
Glass passivated die construction
Low forward voltage drop
High current capability
High surge current capability
Designed for surface mount application
Plastic material-UL flammability 94V-0
Mechanical Data:
•
•
•
•
•
•
Case: DB-S, molded plastic
Terminals: plated leads solderable per MIL-STD-202, Method 208
Polarity: as marked on case
Mounting position: Any
Marking: type number
Lead Free: For RoHS / Lead Free Version,
Mechanical Dimensions: In Inches/mm
DB-S
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
DB151S-DB157S
Green Products
Technical Data
Data Sheet N1476, Rev. B
Marking Diagram:
Where XXXXX is YYWWL
DB151S
YY
WW
L
= Part Name
= Year
= Week
= Lot Number
Cautions:Molding resin
Epoxy resin UL: 94V-0
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
Symbol
DB15 DB15 DB15 DB15 DB15 DB15 DB15
1S
2S
3S
4S
5S
6S
7S
Peak Repetitive Reverse Voltage
DC Blocking Voltage
VRRM
VDC
50
100
200
400
600
800
1000
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Unit
V
V
Maximum average forward rectified
output current
(Note 2)
@TA = 40°C
IO
1.5
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
55
A
Forward Voltage
VF
1.1
V
IRM
5.0
500
µA
RθJA
40
°C/W
RθJL
15
°C/W
CJ
25
pF
TJ, TSTG
-55 to +150
°C
@IF =1.5A, TJ=25°C
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C
Typical Thermal Resistance Junction to
Ambient
Typical Thermal Resistance Junction to Lead
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
Case Style
DB-S
Note: 1. Mounted on glass epoxy PC board with 1.3mm2 solder pad.
2. Measured at 1.0 MHZ and applied reverse voltage of 4.0 VDC
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
DB151S-DB157S
Technical Data
Data Sheet N1476, Rev. B
Green Products
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
DB151S-DB157S
Technical Data
Data Sheet N1476, Rev. B
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Similar pages