GBU8005-GBU810 N1809 REV.-

GBU8005-GBU810
Green Products
Technical Data
Data Sheet N1809, Rev. -
GBU8005-GBU810
Single-Phase 8.0A Glass Passivated Bridge Rectifier
Features:
•
•
•
•
•
Glass passivated die construction
Low forward voltage drop
High current capability
High surge current capability
Plastic material-UL flammability 94V-0
Mechanical Data:
•
•
•
•
•
Case: GBU, Molded plastic
Terminals: Plated leads solderable per MIL-STD-202, Method 208
Polarity: as marked on case
Mounting Position: Any
Lead Free: For RoHS / Lead Free Version
Mechanical Dimensions: In Inches/mm
GBU
MARKING, MOLDING RESIN
st
nd
Marking for Type Number, 1 row SSG YYWWL, 2 row Type Number
Where YY is the manufacture year
WW is the manufacture week code
L is the wafer’s Lot Number
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
GBU8005-GBU810
Green Products
Technical Data
Data Sheet N1809, Rev. -
Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless
otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Maximum Ratings:
Symbol
GBU
8005
GBU
801
GBU
802
GBU
804
GBU
806
GBU
808
GBU Unit
810
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VDC
50
100
200
400
600
800
1000
RMS Reverse Voltage
VRMS
35
70
140
280
420
580
700
Type Number
V
V
Average forward rectified output current
(Note 1)
@TA = 55°C
IO
8.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
150
A
Electrical Characteristics:
Type Number
Forward Voltage (per element)
Symbol
@IF =4A
@IF =8A
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C
Typical Junction Capacitance(per leg)
(Note 2)
GBU
8005
GBU
801
GBU
802
GBU
804
GBU
806
GBU
808
GBU Unit
810
VF
1.0
1.1
V
IRM
5.0
500
µA
CJ
75
pF
Thermal-Mechanical Specifications:
Type Number
Symbol
GBU
801
GBU
802
GBU
804
GBU
806
GBU
808
GBU Unit
810
RθJA
RθJL
21
2.2
°C/W
TJ, TSTG
-55 to +150
°C
Typical Thermal Resistance (per leg)
Operating and Storage Temperature Range
GBU
8005
Case Style
GBU
2
Note: 1. Mounted on glass epoxy PC board with 1.3mm solder pad.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
GBU8005-GBU810
Technical Data
Data Sheet N1809, Rev. -
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Green Products
GBU8005-GBU810
Technical Data
Data Sheet N1809, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
8- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •