ABS2U THRU ABS10U Green Products Technical Data Data Sheet N1812, Rev. - ABS2U THRU ABS10U SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features: • • • • • • Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface mount application Plastic material-UL flammability 94V-0 Mechanical Data: • • • • Case: SOPA-4, Molded plastic ABS Terminals: Plated leads solderable per MIL-STD-202, Method 208 Polarity: Polarity symbols marked on case Mounting Position: Any Mechanical Dimensions: In Inches/mm ABS • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • ABS2U THRU ABS10U Green Products Technical Data Data Sheet N1812, Rev. - Marking Diagram: Where XXXXX is YYWWL ABS2U YY WW L = Part Name = Year = Week = Lot Number Cautions：Molding resin Epoxy resin UL:94V-0 Ordering Information: Device ABS2U THRU ABS10U Package ABS (Pb-Free) Shipping 5000pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • ABS2U THRU ABS10U Green Products Technical Data Data Sheet N1812, Rev. - Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified Single Phase half wave 60Hz, resistive or inductive load. For capacitive load current derate by 20%. Characteristic Maximum repetitive peak reverse voltage RMS Reverse Voltage Maximum DC blocking voltage Symbol ABS2U ABS4U ABS6U ABS8U ABS10U VRRM 200 400 600 800 1000 VR(RMS) 140 280 420 560 700 VDC 200 400 600 800 1000 Units V Average Rectified Output Current @TA = 30°C Io 1.0 V Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 35 A Forward voltage per element @ IF = 1.0A VF 1.1 V Maximum DC reverse current at rated DC blocking voltage IR 5 500 µA RθJL RθJA 62.5 25 °C/W TJ,TSTG -55 to +150 °C TA = 25°C TA = 125°C Typical thermal resistance per leg (Note 1) Operating and storage temperature range Note: 1. Thermal resistance form junction to ambient and junction to lead mounted on P.C.B. with 0.2X0.2''(5X5mm) copper pads. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • ABS2U THRU ABS10U Technical Data Data Sheet N1812, Rev. - Green Products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • ABS2U THRU ABS10U Technical Data Data Sheet N1812, Rev. - Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •