FTB6F-15FP THRU FTB10F-15FP Green Products Technical Data Data Sheet N1814, Rev. - FTB6F-15FP THRU FTB10F-15FP 1.5A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features: • • • • • Glass Passivated Chip Junction Reverse Voltage - 600 to 1000 V Forward Current - 1.5 A Designed for Surface Mount Application Fast reverse recovery time Mechanical Data: • • • PIN 1 2 DESCRIPTION Input Pin(~) Input Pin(~) 3 Output Anode(+) 4 Output Cathode(-) Case: ABS/LBF Terminals: Solderable per MIL-STD-750, Method 2026 Weight: 88 mg Mechanical Dimensions: In Inches/mm ABS • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • FTB6F-15FP THRU FTB10F-15FP Green Products Technical Data Data Sheet N1814, Rev. - Marking Diagram: Type number Marking code FTB6F-15FP FTB8F-15FP FTB10F-15FP F15F6FP F15F8FP F15F10FP Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol FTB6F -15FP FTB8F -15FP FTB10F -15FP Units Maximum repetitive peak reverse voltage VRRM 600 800 1000 V Maximum RMS voltage VRMS 420 560 700 V Maximum DC blocking voltage VDC 600 800 1000 V Characteristic Maximum Average Forward Rectified Current at TA=75℃ Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.5A IF(AV) 1.5 A IFSM 50 A VF 1.3 V Maximum DC reverse current TA=25 ℃ at rated DC blocking voltage TA=125 ℃ Maximum Reverse Recovery Time (Note 3) IR 5.0 50 µA Trr 160 ns Typical Junction Capacitance (Note 1) CJ 35 Pf RθJA 75 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C Typical Thermal Resistance (Note 2) Junction Temperature Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Mounted on glass epoxy PC board with 4×(5×5mm2) copper pad. 3. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • FTB6F-15FP THRU FTB10F-15FP Technical Data Data Sheet N1814, Rev. - • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • Green Products FTB6F-15FP THRU FTB10F-15FP Technical Data Data Sheet N1814, Rev. - Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •