1N4001FL-1N4007FL N1646 REV.-

1N4001FL
THRU
1N4007FL
Technical Data
Data Sheet N1646, Rev. -
1N4001FL THRU 1N4007FL General Purpose Plastic Rectifier
Features
•
•
•
•
•
Low forward voltage drop
Low leakage current
High forward surge capability
Solder dip 260 °C, 40 s
Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Mechanical Data
•
•
•
•
•
Case: SOD-123FL Molded plastic
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.018 grams
Mechanical Dimensions (In mm/Inches)
SOD-123FL
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
1N4001FL
THRU
1N4007FL
Technical Data
Data Sheet N1646, Rev. -
Marking Diagram:
A1
= Marking Code
Cautions:Molding resin
Epoxy resin UL: 94V-0
Ordering Information:
Device
1N4001FL THRU 1N4007FL
Package
Shipping
SOD-123FL
3000pcs / reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification.
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
1N4002 1N4003 1N4004 1N4005 1N4006 1N4007
Symbol 1N4001
Unit
FL
FL
FL
FL
FL
FL
FL
Marking code
A1
A2
A3
A4
A5
A6
A7
Maximum repetitive peak reverse voltage
Maximum DC blocking voltage
VRRM
VDC
50
100
200
400
600
800
1000
V
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
V
Maximum average forward rectified current
@TA = 75°C
I(AV)
1.0
A
IFSM
30.0
A
VF
1.1
V
IR
5.0
50.0
µA
CJ
15.0
pF
RθJA
75.0
°C/W
TJ,TSTG
-65 to +150
°C
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method)
Maximum instantaneous forward voltage at
1.0A
Maximum DC reverse current @TA = 25°C
at rated DC blocking voltage @TA = 100°C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Note: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted.
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
1N4001FL
THRU
1N4007FL
Technical Data
Data Sheet N1646, Rev. -
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
1N4001FL
THRU
1N4007FL
Technical Data
Data Sheet N1646, Rev. DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Similar pages