R1A-R1M N1730 REV.-

R1A-R1M
Green Products
Technical Data
Data Sheet N1730, Rev. -
R1A-R1M
1.0AMP SURFACE MOUNT GLASS FAST RECOVERY RECTIFIER
Features:
•
•
•
•
•
Fast switching for high efficiency
Low Power Loss, High Efficiency
High current capability
For Use in Low Voltage Application
Plastic Case Material has UL Flammability Classication Rating 94V-0
Mechanical Data:
•
•
•
•
•
Case: SMAF, Molded plastic
Terminals: Plated leads solderable per MIL-STD-750,Method 2026 guaranteed
Polarity: Cathode Band or Cathode Notch
Mounting Position: Any
Making: Type Number
Mechanical Dimensions: In Inches/mm
SMAF
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
R1A-R1M
Green Products
Technical Data
Data Sheet N1730, Rev. -
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Type Number
Symbol
R1A
R1B
R1D
R1G
R1J
R1K
R1M
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VDC
50
100
200
400
600
800
1000
V
RMS Reverse Voltage
VRMS
35
70
140
280
420
560
700
V
Average forward rectified output current
@TA = 75°C
IO
1.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
30
A
Forward Voltage
VF
1.3
V
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 100°C
IRM
5.0
150
µA
Maximum Reverse Recovery Time (Note 1)
Trr
Typical Junction Capacitance (Note 2)
CJ
12
pF
Typical Thermal Resistance Junction to
Ambient (Note 3)
RθJA
RθJL
100
32
°C/W
TJ, TSTG
-55 to +150
°C
@IF =1.0A
Operating and Storage Temperature Range
Case Style
150
250
SMAF
Note: 1.Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
2. Measured at 1.0 MHz and Applied reverse Voltage of 4.0V D.C
3.8.0mm²(.013mm thick)land areas.
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
500
ns
R1A-R1M
Technical Data
Data Sheet N1730, Rev. -
Green Products
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
R1A-R1M
Technical Data
Data Sheet N1730, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •