182NQ030-1 N1173 REV.-

SANGDEST
MICROELECTRONICS
Technical Data
Data Sheet N1173, Rev. -
182NQ030-1
Green Products
182NQ030-1 SCHOTTKY RECTIFIER
Applications:
● Switching power supply ● Converters ● Free-Wheeling diodes ● Reverse battery protection
Features:
•
•
•
•
•
•
•
•
•
•
•
150℃ TJ operation
Unique high power, Half-Pak module
Replaces three parallel DO-5’S
Easier to mount and lower profile than DO-5’S
High purity, high temperature epoxy encapsulation for enhanced
mechanical strength and moisture resistance
Very low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term reliability
This is a Pb − Free Device
All SMC parts are traceable to the wafer lot
Additional testing can be offered upon request
Mechanical Dimensions: In Inches / mm
PRM1-1(HALF PAK Module)
MARKING,MOLDING RESIN
st
nd
Marking for182NQ030-1, 1 row SS YYWWL, 2 row 182NQ030-1
Where YY is the manufacture year
WW is the manufacture week code
L is the wafer’s Lot Number
Molding resin
Epoxy resin UL:94V-0
• Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 •
• FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn •
SANGDEST
MICROELECTRONICS
182NQ030-1
Technical Data
Data Sheet N1173, Rev. -
Green Products
Maximum Ratings:
Characteristics
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Max. Average Forward Current
Symbol
VRRM
VRWM
VR
IF(AV)
Max. Peak One Cycle NonRepetitive Surge Current
(per leg)
Non-Repetitive Avalanche Energy
Condition
-
Max.
30
Units
V
50% duty cycle @TC =107°C,
rectangular wave form
180
A
IFSM
8.3 ms, half Sine pulse
4140
A
EAS
TJ=25℃,IAS=36A,L=0.25mH
Current decaying linearly to
zero in 1 μsec Frequency
limited by TJ max. VA=1.5×
VR typical
162
mJ
36
A
Repetitive Avalanche Current
IAR
Electrical Characteristics:
Characteristics
Max. Forward Voltage
Drop(per leg) *
Symbol
VF1
VF2
Max. Reverse Current (per
leg) *
Max. Junction Capacitance
(per leg)
Typical Series Inductance
(per leg)
Max. Voltage Rate of Change
IR1
IR2
CT
LS
dv/dt
Condition
@ 180A, Pulse, TJ = 25 °C
@ 360A, Pulse, TJ = 25 °C
@ 180A, Pulse, TJ = 125 °C
@ 360A, Pulse, TJ = 125 °C
@VR = rated VR TJ = 25 °C
@VR = rated VR TJ = 125 °C
@VR = 5V, TC = 25 °C
fSIG = 1MHz
Measured lead to lead 5 mm
from package body
-
Condition
-
Max.
0.51
0.61
0.41
0.54
15
840
Units
V
V
mA
mA
7700
pF
6.0
nH
10,000
V/μs
Specification
-55 to +150
-55 to +150
Units
°C
°C
*Pulse Width < 300µs, Duty Cycle <2%
Thermal-Mechanical Specifications:
Characteristics
Max. Junction Temperature
Max. Storage Temperature
Maximum Thermal
Resistance Junction to Case
Typical Thermal Resistance,
case to Heat Sink
Symbol
TJ
Tstg
RθJC
DC operation
0.30
°C/W
Rθcs
Mounting surface, smooth
and greased
0.15
°C/W
Mounting Torque
TM
Non-lubricated threads
Approximate Weight
Case Style
wt
-
Mounting
Torque
Terminal
Torque
25.6
23(min)
29(max)
35(min)
46(max)
Kg-cm
g
PRM1-1
• Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 •
• FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn •
SANGDEST
MICROELECTRONICS
Technical Data
Data Sheet N1173, Rev. -
182NQ030-1
Green Products
• Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 •
• FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn •
SANGDEST
MICROELECTRONICS
Technical Data
Data Sheet N1173, Rev. -
182NQ030-1
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 •
• FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn •