403CNQ600-1 N1810 REV.-

403CNQ600-1
Technical Data
Data Sheet N1810, Rev. -
Green Products
403CNQ600-1 ULTRAFAST RECTIFIER
Applications:
● High current switching power supply ● Plating power supply ● Free-Wheeling diodes
● Reverse battery protection ● Converters ● UPS System ● Welding
Features:
•
•
•
•
•
•
•
•
•
175 ℃ TJ operation
Center tap module
High purity, high temperature epoxy encapsulation for enhanced
mechanical strength and moisture resistance
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term reliability
This is a Pb − Free Device
All SMC parts are traceable to the wafer lot
Additional testing can be offered upon request
403CNQ600-1
The top side is terminal, the bottom
side is base plate.
Mechanical Dimensions: In mm
16 0.5
11
±
3
13.5
M6 SCREWS
20+1
-0.2
92.4
80.0
35.0
2-R6.5
2-∮7.2
PRM4-1 (Non-Isolated)
MARKING, MOLDING RESIN
st
nd
Marking for 403CNQ600-1, 1 row SS YYWWL, 2 row 403CNQ600-1
Where YY is the manufacture year
WW is the manufacture week code
L is the wafer’s Lot Number
Molding resin
Epoxy resin UL: 94V-0
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
403CNQ600-1
Technical Data
Data Sheet N1810, Rev. -
Green Products
Maximum Ratings:
Characteristics
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Forward Current
Symbol
VRRM
VRWM
VR
Condition
-
Max.
Units
600
V
IF(AV)
50% duty cycle @TC =125°C,
rectangular wave form
400
A
IFSM
8.3 ms, half Sine pulse
2700
A
Condition
@ 200A, Pulse, TJ = 25 °C
@VR = rated VR TJ = 25 °C
@VR = rated VR TJ = 125 °C
Max.
1.5
20
3
Units
V
μA
mA
trr
IF=500mA, IR=1A,and
Irm=250mA
120
ns
Symbol
TJ
Tstg
RθJC
Condition
DC operation
Peak One Cycle Non-Repetitive
Surge Current
Electrical Characteristics:
Characteristics
Forward Voltage Drop*
Reverse Current*
Symbol
VF1
IR1
IR2
Reverse Recovery Time
* Pulse Width < 300µs, Duty Cycle <2%
Thermal-Mechanical Specifications:
Characteristics
Junction Temperature
Storage Temperature
Typical Thermal Resistance
Junction to Case(per diodes)
Approximate Weight
Mounting torque
Mounting torque
Terminal torque
Case Style
wt
TM
-
Specification
-55 to +175
-55 to +175
0.14
80
30(3.4)
18(2.1)
30(3.4)
PRM4-1(Non-Isolated)
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Units
°C
°C
°C/W
g
Lbf.in
(N.M)
403CNQ600-1
Technical Data
Data Sheet N1810, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Similar pages