SMD Aluminum Electrolytic Capacitor – JCC FEATURES Ø Ø Ø Low leakage current (0.5~3.3μA Max.) Low cost for replacement of some tantalum applications Comply with the RoHS directive SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current Dissipation Factor (Tan δ) Stability At Low Temp. -40℃ ~ +85℃ 6.3V ~ 50V.DC 0.1 ~ 220μF ±20% at 120Hz, 20℃ Leakage current≤0.002CV or 0.5μA, whichever is greater (After 2 minutes’ application of rated voltage) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) 6.3 10 16 Surge Voltage (V) 8.0 13 20 Tan δ (Max.) 0.24 0.20 0.16 Measurement Frequency: 120Hz Rated Voltage (V) Impedance Ratio Z（-25℃） / Z(20℃) ZT / Z20 (Max.) Z（-40℃）/ Z(20℃) 6.3 4 8 25 32 0.14 35 44 0.12 10 3 6 16,25 2 4 50 63 0.1 35,50 2 3 Load Life After 2000 hours application of rated voltage at 85℃, Capacitors meet the characteristics requirements listed below. Capacitance Change Within ± 25% of initial value Dissipation Factor 200% or less of initial specified value Leakage Current Initial specified value or less Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed below. Capacitance Change Within ± 10% of initial value Dissipation Factor Initial specified value or less Leakage Current Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] *2 Applicable toΦ6.3* ΦDxL 4x5.4 A 2.0 B 4.3 C 4.3 E±0.2 1.0 L 5.4 5x5.4 6.3x5.4 6.3x7.7 2.2 5.3 5.3 1.4 5.4 2.6 6.6 6.6 1.9 5.4 2.6 6.6 6.6 1.9 7.7 Please visit our website to get more update data, those data & specification are subject to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283 SMD Aluminum Electrolytic Capacitor – JCC FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency Coefficient ~50Hz 0.7 120Hz 1.0 300Hz 1.17 1KHz 1.36 10KHz~ 1.50 DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT&ESR WV 6.3(0J) Parameter Case Size ØDxL (mm) E.S.R. (Ω) 20℃ 120Hz uF 10(1A) Ripple current (mA rms) at 85℃ 120Hz Case Size ØDxL (mm) E.S.R (Ω) 20℃ 120Hz 16(1C) Ripple current (mA rms) at 85℃ 120Hz Case Size ØDxL (mm) E.S.R. (Ω) 20℃ 120Hz Ripple current (mA rms) at 85℃ 120Hz 4×5.4 34.5 25 10 100 22 220 4×5.4 23.5 31 5×5.4 19.6 35 5×5.4 15.7 39 33 330 5×5.4 15.7 39 5×5.4 13.1 43 6.3×5.4 10.5 57 47 470 5×5.4 11.0 47 6.3×5.4 9.2 59 6.3×5.4 7.3 68 100 101 6.3×5.4 5.2 75 6.3×5.4 4.3 76 6.3×7.7 3.5 96 220 221 6.3×7.7 2.4 85 DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT&ESR WV 25(1E) Parameter Case Size ØDxL (mm) uF 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 4×5.4 5×5.4 6.3×5.4 6.3×5.4 6.3×7.7 E.S.R. (Ω) 20 ℃ 120Hz, 64.2 30.2 13.7 9.1 6.4 35(1V) Ripple current (mA rms) at 85℃ 120Hz 19 28 52 63 100 Case Size ØDxL (mm) 4×5.4 5×5.4 6.3×5.4 6.3×7.7 6.3×7.7 E.S.R. (Ω) 20℃ 120Hz, 55.1 25.9 11.8 7.8 5.5 50(1H) Ripple current (mA rms) at 85℃ 120Hz 20 30 54 105 110 Case Size ØDxL (mm) E.S.R. (Ω) 20℃ 120Hz, Ripple current (mA rms) at 85℃ 120Hz 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 4×5.4 5×5.4 6.3×5.4 6.3×7.7 2156 980 653 459 216 98 65 46 22 9.8 1.0 2.3 3.5 5 10 15 18 23 34 85 Please visit our website to get more update data, those data & specification are subject to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283