2313

NTE2313
Silicon NPN Transistor
High Speed Switch
Description:
The NTE2313 is a high–voltage, high–speed, glass–passivated NPN power transistor in a TO220
type package designed for use in converters, inverters, switching regulators, motor control systems,
and switching applications.
Absolute Maximum Ratings:
Collector–Emitter Voltage, VCEO(sus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450V
Collector–Emitter Voltage, VCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000V
Emitter–Base Voltage, VEBO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Collector Current, IC
Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A
Peak (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3A
Base Current, IB
Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.75A
Peak (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A
Peak Reverse Base Current, –IBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A
Total Power Dissipation (TC = +25°C), Ptot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50W
Derate Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mW/°C
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Storage Temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5°C/W
Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.5°C/W
Lead Temperature (During Soldering, 1/8” from case, 5sec), TL . . . . . . . . . . . . . . . . . . . . . . . +275°C
Note 1. Pulse Test: Pulse Width = 5ms, Duty Cycle ≤ 10%.
Electrical Characteristics: (TC = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
450
–
–
V
VCS = 1000V
–
–
0.2
mA
VCS = 1000V, TC = +125°C
–
–
1.5
mA
IC = 0, VEB = 5V
–
–
1
mA
OFF Characteristics (Note 2)
Collector–Emitter Sustaining Voltage
Collector Cutoff Current
Emitter Cutoff Current
VCEO(sus) IC = 100mA, L = 25mH
ICES
IEBO
Note 2. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2%.
Electrical Characteristics (Cont’d): (TC = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
ON Characteristics (Note 2)
DC Current Gain
hFE
IC = 0.1A, VCE = 5V
30
50
–
VCE(sat)
IC = 0.3A, IB = 30mA
–
–
0.8
V
IC = 1A, IB = 200mA
–
–
1.0
V
IC = 1A, IB = 0.2A
–
–
1.1
V
fT
IC = 500mA, VCE = 10V, f = 1MHz
4
–
–
MHz
Turn–On Time
ton
–
0.3
0.5
µs
Storage Time
ts
VCC = 250V, IC = 1A, IB1 = 0.2A,
IB2 = 0.4A
–
2.0
3.5
µs
Fall Time
tf
–
0.3
–
µs
Collector–Emitter Saturation Voltage
Base–Emitter Saturation Voltage
VBE(sat)
Dynamic Characteristics
Current–Gain Bandwidth Product
Switching Characteristics
Note 2. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2%.
.420 (10.67)
Max
.110 (2.79)
.147 (3.75)
Dia Max
.500
(12.7)
Max
.250 (6.35)
Max
.500
(12.7)
Min
.070 (1.78) Max
Base
.100 (2.54)
Emitter
Collector/Tab