Datasheet

UNISONIC TECHNOLOGIES CO., LTD
R070LD10
LINEAR INTEGRATED CIRCUIT
VOLTAGE REGULATOR
„
DESCRIPTION
As the UTC linear integrated LDO, the UTC R070LD10
shows a high current, high accuracy, low-dropout voltage which
built in on/off function. The features are: low dropout voltage, very
low ground current. Cause the series have been designed for
high current loads, so they are also used in lower current,
extremely low dropout-critical systems (in which their tiny dropout
voltage and ground current values are important attributes).
„
FEATURES
* Built-in ON/OFF Function
* Over Current Protection Function
* Over Heat Protection Function
* Adjustable DC Output Voltage
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
R070LD10L-xx-TN4-R
R070LD10G-xx-TN4-R
Note: xx: Output Voltage, refer to Marking Information.
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
Package
Packing
TO-252-4
Tape Reel
1 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE
VOLTAGE CODE
TO-252-4
18 :1.8V
25 :2.5V
50 :5.0V
AD :ADJ
MARKING
UTC
R070LD10
Voltage Code
L: Lead Free
G: Halogen Free
LOT Code
Date Code
1 2 3 4 5
„
PIN CONFIGURATION
„
PIN DESCRIPTION
PIN NO. PIN NAME
1
VIN
2
VC
3
VOUT
4
VADJ/NC
5
GND
FUNCTION
DC input
ON/OFF control
DC output
Output voltage adjustment / No Connection
Ground
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
For Adjustable Version
VIN
1
VC
2
3 VOUT
STARTING
CIRCUIT
REFERENCE
VOLTAGE
OTP
OVERCURRENT
PROTECTION
SOA
PROTE
CTION
4
VADJ
5
GND
For Fixed Version
VIN
1
VC
2
3 VOUT
STARTING
CIRCUIT
REFERENCE
VOLTAGE
OTP
OVERCURRENT
PROTECTION
SOA
PROTE
CTION
4 NC
5
GND
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
UNITS
Input Voltage (Note 2)
VIN
10
V
ON/OFF Control Voltage (Note 2)
VC
10
V
Output Adjustment pin Voltage (Note 2)
VADJ
5
V
Output Current
IOUT
1
A
Power Dissipation
PD
8
W
Junction Temperature
TJ
150
°C
Operating Temperature
TOPR
-40 ~ +85
°C
Storage Temperature
TSTG
-40 ~ +150
°C
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. All are open except GND and applicable terminals.
„
ELECTRICAL CHARACTERISTICS
For Adjustable Version
(VIN=5V, VOUT=3.3V (R1=1KΩ), IOUT=500mA, VC=2.7V, Ta=25°C, unless otherwise specified)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP
Input Voltage
VIN
2.35
Output Voltage
VOUT
1.5
Load Regulation
ΔVOUT
IOUT=5mA~1A
0.2
Line Regulation
ΔVOUT
VIN=4~ 8V, IOUT=5mA
0.2
Ripple Rejection
RR
60
Dropout Voltage
VD
IOUT=500mA, VIN=2.85V
Reference Voltage
VREF
1.206 1.23
Temperature Coefficient of Reference
TJ=0 ~125°C, IOUT=5mA
±1.0
TCVREF
Voltage
ON-State Voltage for Control
VC(ON)
(Note)
2.0
ON-State Current for Control
IC(ON)
OFF-State Voltage for Control
VC(OFF)
IOUT=0A
OFF-State Current for Control
IC(OFF)
IOUT=0A, VC=0.4V
Quiescent Current
IQ
IOUT=0A
1
Output Off-State Consumption Current
IQS
VC=0.4V
Note: In case that the control terminal (2th pin) is non-connection, output voltage should be OFF state.
For Fixed Version
(VIN=VOUT+1V, IOUT=500mA, VC=2.0V, Ta=25°C, unless otherwise specified)
PARAMETER
SYMBOL
CONDITIONS
Input Voltage
VIN
Output Voltage
VOUT
MIN
TYP
VOUT
×0.98
VOUT
MAX UNITS
V
10.0
V
7.0
%
1
%
1
dB
0.5
V
V
1.254
%
200
0.6
5
2
5
MAX UNITS
V
10.0
VOUT
V
×1.02
%
1
%
1
dB
0.5
V
Load Regulation
ΔVOUT
IOUT=5mA~1A
0.2
Line Regulation
ΔVOUT
VIN=VOUT+0.5V~ 8V, IOUT=5mA
0.2
Ripple Rejection
RR
60
Dropout Voltage
VD
IOUT=500mA
Temperature Coefficient of Reference
TJ=0 ~125°C, IOUT=5mA
±1.0
TCVREF
Voltage
ON-State Voltage for Control
VC(ON)
(Note)
2.0
ON-State Current for Control
IC(ON)
200
OFF-State Voltage for Control
VC(OFF)
IOUT=0A
0.6
OFF-State Current for Control
IC(OFF)
IOUT=0A, VC=0.4V
5
Quiescent Current
IQ
IOUT=0A
1
2
Output Off-State Consumption Current
IQS
VC=0.4V
5
Note: In case that the control terminal (2th pin) is non-connection, output voltage should be OFF state.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
V
μA
V
μA
mA
μA
%
V
μA
V
μA
mA
μA
4 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATION CIRCUITS
Adjustable Voltage:
DC Input
R2
R070LD10
4
2
CI
1μF
VIN
ON-OFF single
High:Output ON
Low or Open:Output OFF
VOUT
3
1
CO
10μF
5
Load
R1
1KΩ
Note: There is no oscillation when both CIN and COUT are removed, if applications are properly matched.
Fixed Voltage:
Note: There is no oscillation when both CIN and COUT are removed, if applications are properly matched.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS MEASURING CIRCUITS
Adjustable Voltage:
DC Input
VOUT
33
1
VIN
2
CI
1μF
IC
IOUT
R2
R070LD10
4
A
V
CO
10μF
5
R1
A
A
Test circuit for regulation portion
ei
VOUT=VREF*(1+R2/R1)
R1=1kΩ, VREF≈1.23V
+
3
3
1
DC Input
RL
IQ
R2
R070LD10
VO
IOUT
~
VIN
eo
4
2
CI
1μF
5
VC=2.7V
Test circuit for Critical rate for ripple rejection
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
V
V
~
CO
10μF
R1
RL
f=120Hz sine wave ,ei(rms)=0.5V ,
VIN=5V, VOUT=3.3V(R1=1kΩ)
IOUT=0.3A, RR=20log{ei(rms)/eo(rms)}
6 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS MEASURING CIRCUITS(Cont.)
Fixed Voltage:
DC Input
IOUT
R070LD10
VIN
2
CI
1μF
IC
VOUT
33
1
4
5
A
V
CO
10μF
A
RL
A
IQ
Test circuit for regulation portion
ei
+
3
3
1
DC Input
VOUT=VREF*(1+R2/R1)
R1=1kΩ, VREF≈1.23V
VO
IOUT
R070LD10
~
VIN
eo
4
2
CI
1μF
5
VC=2.7V
Test circuit for Critical rate for ripple rejection
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
V
V
~
CO
10μF
RL
f=120Hz sine wave ,ei(rms)=0.5V ,
VIN=5V, VOUT=3.3V(R1=1kΩ)
IOUT=0.3A, RR=20log{ei(rms)/eo(rms)}
7 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
8 of 10
QW-R101-024.C
R070LD10
„
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS(Cont.)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
9 of 10
QW-R101-024.C
R070LD10
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
10 of 10
QW-R101-024.C