Industrial Automation

Advanced Cable Products for
Industrial Applications
Reliable productivity from the
factory floor to process controls
3
2
6
4
5
1
A
lpha Wire’s industrial
cables are well suited
to the widest range of
industrial applications from
the factory floor to process
controls to wind turbines.
We offer a range of cables
for general needs such as
control wiring in both
stationary and moving
components. We also
offer application-specific
configurations for use
with motors, drives, and
servo systems.
2
General
Application
Cable
Advantages
Stationary
Series M
Stationary/
Minimal Flex
Series P
PVC jacket
Oil resistant (Oil Res. I)
TPE jacket
Improved oil and chemical resistance (Oil Res. I/II)
Moderate
Flexing
Xtra-Guard
Standard Flex
(65000 Series)
1 million flex cycles
PVC jacket
Series XM
12 million flex cycles
Oil resistant (Oil Res. I)
20 million flex cycles
Improved oil and chemical resistance (Oil Res. I/II)
Series F
High Flexing
Xtra-Guard
Continuous Flex Data
(86000 Series)
Xtra-Guard
Continuous Flex Control
(85000 Series)
Xtra-Guard
Torsional Flex
(87000 Series)
Servomotors/
Drives
Series SF
VFD Systems
Series V
Motor Supply
Flexible
Motor Supply
6 million flex cycles
PVC jacket
14 million flex cycles
PVC jacket
1 million flex cycles
TPE insulation, polyurethane jacket
TPE jacket
Enhanced flexibility for easy installation and routing
Improved oil and chemical resistance (Oil Res. I/II)
With or without brake/ground pairs
Oil resistant (Oil Res. I)
Low capacitance for extended runs
XLPE insulation for improved dielectric properties
Excellent corona resistance
Uniform geometry for reduced common-mode current
PVC jacket
Oil resistant (Oil Res. I)
Suited to light-duty flexing and VFD applications
1. Articulated Motion
Xtra-Guard Torsion Flex
2. C
artesian Motion
Series F
Series XM
3. Motor
Flexible Motor Supply
4. Static Control Cabling
Series M
Series P
5. Servomotors
Series SF
6. VFD
Series V
Superior Cable by Design
• Global availability
Alpha industrial cables are
designed to perform better,
providing consistent, reliable
operation. The result is more
uptime, fewer errors, and precise
operation of equipment. Our
cables are designed and built
to uncompromising standards
so you get consistency and
uniformity in every cable.
• Large in-stock inventory
Superior Service
by Design
Beyond our well-earned
reputation for high-quality,
premium-grade products, our
commitment to service aims
to make specifying and getting
the cable you need both fast
and easy.
Specific
Application
Stationary
Cartesian
Robots
Transfer
Shuttles
Gantry
Pick and
Place
Machine
Tools
Conveying
Systems
Packaging/
Material
Handling
• F
lexible ordering, with small
and large put-ups available
• F
ast shipping—usually the
same day
• 1 500 distributor locations
worldwide
• Engineering support
• E
xtensive on-line tools to
select and specify cable
• C
ustom designs with on-line
Cable Design Center™
• F
ast turnarounds on
custom designs
Connection
Alpha Cable
Control panel to machine
Source power
Flex track
Tool mechanism
Source power
Flex track
Robot
Servomotor
Source power
Track
Robot
Servomotor
Source power
Flex track
Servomotor
End of arm tool
Source power
Internal XYZ axis
Automated tool changer
Servomotor
Drive systems
Source power
Drive systems
Servomotor
Motor supply
Source power
Drives
Servomotor
Motor power/control
Series M, Series P
Series M, Series P
Series XM, Series F, XG Flex 85000, Series SF
XG Flex 87000 Series
Series M, Series P
Series XM, Series F, XG Flex 85000, Series SF
XG Flex 87000 Series for end of arm tool
Series SF
Series M, Series P
Series XM, Series F, XG Flex 85000, Series SF
XG Flex 87000 Series for end of arm tool
Series SF
XG Flex 87000 Series for end of arm tool
Series XM, Series F, XG Flex 85000 Series
Series SF
XG Flex 87000 Series
Series M, Series P
Series XM, Series F, XG Flex 85000, SF Series
Series XM, Series F, XG Flex 85000/86000 Series
Series SF
Series V VFD
Series M, Series P, XG Flex 65000
Series V VFD
Series SF
Flexible Motor Supply
Series M, Series P
Series V VFD
Series SF
Motor Supply, Series M, Series P
3
Series F Continuous Flex Control Cables
Maximum Flexibility for Demanding High-Flex Applications
Series F cables are our most flexible and robust
control cables—providing reliable flexing day in
and day out. Designed for a variety of flexing
styles, they have been tested to exceed over
20 million rolling flex cycles, making them
ideal for both single-axis and multi-axis
motion control and robotic applications where
continuous flexing is required. The TPE jacket
offers exceptional resistance to oils, solvents,
and chemicals found in industrial applications.
• Maximum flex life
• T
PE jacket for superior resistance to oils
and chemicals
• F
inely stranded conductors and slipper
agent on conductor insulation for superior
high-speed flexing
Approvals
Temperature range
-25°C to +90°C (static)
-5°C to +90°C (dynamic)
Suitable for use Class I, Division
2 locations per Article 501 of the
National Electric Code
Color Coding
Black, blue, or red
numbered conductors
UL TC-ER
UL PLTC
UL TFFN/THHN
UL Oil Res. I/II
UL Sunlight Resistant
CSA AWM I/II A/B FT4
CSA CIC
CSA TC
CE compliant
RoHS compliant
California Prop 65
One green/yellow
ground conductor
One white striped neutral
(12 conductors or greater)
Materials
Conductors Stranded bare copper
Specifications
Insulation
PVC/nylon
Conductors
Up to 65
Jacket
Black thermoplastic elastomer
Wire range
18 to 8 AWG (0.83 to 8.51 mm2)
Voltage rating
600 V
• Over 20 million rolling flex cycles
• Tic-tock and twist tested per MIL-C-13777G
18 AWG (0.83 mm2)
Stranding: 41/34 (41 x 0.16 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
F18003KW
F18004KW
F18005KW
F18007KW
F18012KW
F18017KW
F18022KW
F18025KW
F18034KW
F18042KW
F18049KW
F18065KW
4
Blue Insul.
F18003LW
F18004LW
F18005LW
F18007LW
F18012LW
F18017LW
F18022LW
F18025LW
F18034LW
F18042LW
F18049LW
F18065LW
Conductors
Red Insul.
F18003RW
F18004RW
F18005RW
F18007RW
F18012RW
F18017RW
F18022RW
F18025RW
F18034RW
F18042RW
F18049RW
F18065RW
3
4
5
7
12
17
22
25
34
42
49
65
Nominal
Diameter
Inch
0.308
0.333
0.360
0.418
0.515
0.597
0.656
0.717
0.775
0.874
0.965
1.052
mm
7.82
8.46
9.14
10.62
13.08
15.16
16.66
18.21
19.69
22.20
24.51
26.72
Jacket
Thickness
Inch
0.050
0.050
0.050
0.050
0.065
0.065
0.065
0.065
0.065
0.085
0.085
0.085
mm
1.27
1.27
1.27
1.27
1.65
1.65
1.65
1.65
1.65
2.16
2.16
2.16
Series F Cables
16 AWG (1.31 mm2)
Stranding: 65/34 (65 x 0.16 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
F16003KW
F16004KW
F16005KW
F16007KW
F16012KW
F16017KW
F16019KW
F16022KW
F16025KW
F16033KW
F16042KW
F16049KW
F16065KW
Blue Insul.
F16003LW
F16004LW
F16005LW
F16007LW
F16012LW
F16017LW
F16019LW
F16022LW
F16025LW
F16033LW
F16042LW
F16049LW
F16065LW
Conductors
Red Insul.
F16003RW
F16004RW
F16005RW
F16007RW
F16012RW
F16017RW
F16019RW
F16022RW
F16025RW
F16033RW
F16042RW
F16049RW
F16065RW
3
4
5
7
12
17
19
22
25
33
42
49
65
Nominal
Diameter
Inch
mm
0.334
8.48
0.362
9.19
0.393
9.98
0.489
12.42
0.565
14.35
0.657
16.69
0.691
17.55
0.724
18.39
0.793
20.14
0.899
22.83
0.966
24.54
1.069
27.15
1.168
29.67
Jacket
Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.16
0.085
2.16
0.085
2.16
0.085
2.16
14 AWG (2.11 mm2)
Stranding: 105/34 (105 x 0.16 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
F14004KW
F14005KW
F14007KW
F14012KW
Blue Insul.
F14004LW
F14005LW
F14007LW
F14012LW
Conductors
Red Insul.
F14004RW
F14005RW
F14007RW
F14012RW
4
5
7
12
Nominal
Diameter
Inch
mm
0.398
10.11
0.434
11.02
0.539
13.69
0.628
15.95
Jacket
Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.065
1.65
0.065
1.65
12 AWG (3.38 mm2)
Stranding: 168/34 (168 x 0.16 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
F12004KW
F12005KW
F12007KW
Blue Insul.
F12004LW
F12005LW
F12007LW
Conductors
Red Insul.
F12004RW
F12005RW
F12007RW
4
5
7
Nominal
Diameter
Inch
mm
0.501
12.73
0.545
13.84
0.640
16.26
Jacket
Thickness
Inch
mm
0.065
1.65
0.065
1.65
0.065
1.65
10 AWG (5.32 mm2)
Stranding: 105/30 (105 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
F10004KW
F10005KW
F10007KW
Blue Insul.
F10004LW
F10005LW
F10007LW
Conductors
Red Insul.
F10004RW
F10005RW
F10007RW
4
5
7
Nominal
Diameter
Inch
mm
0.565
14.35
0.618
15.70
0.729
18.52
Jacket
Thickness
Inch
mm
0.065
1.65
0.065
1.65
0.065
1.65
8 AWG (8.51 mm2)
Stranding: 168/30 (168 x 0.25 mm)
Insulation thickness: 0.032 (0.81 mm) PVC/0.006 (0.15 mm) nylon
Part No.
Black Insul.
F08004KW
Blue Insul.
F08004LW
Conductors
Red Insul.
F08004RW
4
Nominal
Diameter
Inch
mm
0.740
18.80
Jacket
Thickness
Inch
mm
0.065
1.65
5
Series M Control Cables
Superior Oil and Chemical Resistance in a Rugged Cable
for Stationary Applications
Series M cable meets the needs for stationary/
cable tray and minimal flexing applications
and where superior resistance to oils and
chemicals is mandatory. Series M
multiconductor cables offer superior
performance in static applications, with a
tough PVC/PVC-nylon jacket insulation and
resistance to oils and chemicals found in
most manufacturing environments.
The TC/ER rating allows the cable to be run
on overhead trays from control panels to
machine centers.
Approvals
Suitable for use Class I, Division
2 locations per Article 501 of the
National Electric Code
UL TC-ER
UL PLTC
UL MTW
UL WTTC
UL Oil Res. I
UL Sunlight Resistant
UL Direct Burial
CSA AWM I/II A/B FT4
CE compliant
RoHS compliant
California Prop 65
Temperature range -25°C to +90°C (static)
-5°C to +90°C (dynamic)
Color Coding
Black, blue, or red
numbered conductors
One green/yellow ground
conductor
One white striped neutral
(12 conductors or greater)
Materials
Conductors
Stranded bare copper
Specifications
Insulation
PVC/nylon
• Slipper agent design
Conductors
Up to 65
Jacket
Slate PVC
• Abrasion resistant
Wire range
18 to 8 AWG (0.96 to 8.52 mm2)
• Strong resistance to oils and chemicals
• Direct burial
Voltage rating
600 V
18 AWG (0.96 mm2)
Stranding: 19/30 (19 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
M18103KW
M18104KW
M18105KW
M18107KW
M18112KW
M18117KW
M18122KW
M18125KW
M18134KW
M18142KW
M18149KW
M18165KW
6
Blue Insul.
M18103LW
M18104LW
M18105LW
M18107LW
M18112LW
M18117LW
M18122LW
M18125LW
M18134LW
M18142LW
M18149LW
M18165LW
Conductors
Red Insul.
M18103RW
M18104RW
M18105RW
M18107RW
M18112RW
M18117RW
M18122RW
M18125RW
M18134RW
M18142RW
M18149RW
M18165RW
3
4
5
7
12
17
22
25
34
42
49
65
Nominal
Diameter
Inch
mm
0.301
7.65
0.326
8.28
0.353
8.97
0.381
9.68
0.515
13.08
0.594
15.09
0.651
16.54
0.699
17.75
0.777
19.74
0.874
22.20
0.923
23.44
1.029
26.14
Jacket
Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.15
0.085
2.15
0.085
2.15
Series M Cables
16 AWG (1.32 mm2)
Stranding: 26/30 (26 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
M16103KW
M16104KW
M16105KW
M16107KW
M16112KW
M16117KW
M16119KW
M16122KW
M16125KW
M16133KW
M16142KW
M16149KW
M16165KW
Conductors
Blue Insul.
M16103LW
M16104LW
M16105LW
M16107LW
M16112LW
M16117LW
M16119LW
M16122LW
M16125LW
M16133LW
M16142LW
M16149LW
M16165LW
Red Insul.
M16103RW
M16104RW
M16105RW
M16107RW
M16112RW
M16117RW
M16119RW
M16122RW
M16125RW
M16133RW
M16142RW
M16149RW
M16165RW
3
4
5
7
12
17
19
22
25
33
42
49
65
Nominal
Diameter
Inch
mm
0.323
8.20
0.350
8.89
0.380
9.65
0.421
10.69
0.557
14.14
0.644
16.35
0.644
16.35
0.707
17.95
0.761
19.32
0.857
21.76
0.950
24.13
1.005
25.52
1.122
28.49
Jacket
Thickness
Inch
0.050
0.050
0.050
0.055
0.065
0.065
0.065
0.065
0.065
0.085
0.085
0.085
0.085
mm
1.27
1.27
1.27
1.39
1.65
1.65
1.65
1.65
1.65
2.15
2.15
2.15
2.15
14 AWG (2.09 mm2)
Stranding: 41/30 (41 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
M14104KW
M14105KW
M14107KW
M14112KW
M14125KW
Nominal
Diameter
Conductors
Blue Insul.
M14104LW
M14105KW
M14107LW
M14112LW
M14125LW
Red Insul.
M14104RW
M14105RW
M14107RW
M14112RW
M14125RW
4
5
7
12
25
Inch
0.384
0.428
0.483
0.615
0.887
Jacket
Thickness
mm
9.75
10.87
12.26
15.62
22.52
Inch
0.050
0.055
0.065
0.065
0.085
mm
1.27
1.39
1.65
1.65
2.15
12 AWG (3.31 mm2)
Stranding: 65/30 (65 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
M12104KW
M12105KW
M12107KW
Nominal
Diameter
Conductors
Blue Insul.
M12104LW
M12105LW
M12107LW
Red Insul.
M12104RW
M12105RW
M12107RW
4
5
7
Inch
0.44
0.499
0.540
Jacket
Thickness
mm
11.17
12.67
13.71
Inch
0.055
0.065
0.065
mm
1.39
1.65
1.65
10 AWG (5.32 mm2)
Stranding: 105/30 (105 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm) PVC/0.005 (0.10 mm) nylon
Part No.
Black Insul.
M10104KW
M10105KW
M10107KW
Nominal
Diameter
Conductors
Blue Insul.
M10104LW
M10105LW
M10107LW
Red Insul.
M10104RW
M10105RW
M10107RW
4
5
7
Inch
0.549
0.600
0.652
Jacket
Thickness
mm
13.94
15.24
16.56
Inch
0.065
0.065
0.065
mm
1.65
1.65
1.65
8 AWG (8.52 mm2)
Stranding: 168/30 (168 x 0.25 mm)
Insulation thickness: 0.032 (0.81 mm) PVC/0.006 (0.15 mm) nylon
Part No.
Black Insul.
M08104KW
M08105KW
Blue Insul.
M08104LW
M08105LW
Nominal
Diameter
Conductors
Red Insul.
M08104RW
M08105RW
4
5
Inch
0.724
0.795
Jacket
Thickness
mm
18.38
20.19
Inch
0.065
0.065
mm
1.65
1.65
7
Series P Enhanced Stationary Control Cable
Superior Oil and Chemical Resistance in a Cable with Enhanced
Routability and Flexibility for Stationary or Minimal Flex Applications
Series P cables combine the exceptional oil and
chemical resistance of Series M cable with a
specially formulated thermoplastic elastomer
jacket for additional flexibility. This flexibility
makes it easier to install and route the cable in
tight spaces.
The cable can be used in flex applications
where travel distances and flexing speeds
are low.
• Enhanced flexibility and routability
• S
uperior resistance to oils and chemicals
• Abrasion resistant
Approvals
Suitable for use Class I, Division
2 locations per Article 501 of the
National Electric Code
UL TC-ER
UL PLTC
UL MTW
UL TFFN/THHN
UL Oil Res. I/II
UL Sunlight Resistant
CSA AWM I/II A/B FT4
CSA CIC
CSA TC
CE compliant
RoHS compliant
California Prop 65
Temperature range -25°C to +90°C
Color Coding
Black, blue, or red
numbered conductors
One green/yellow ground
conductor
One white striped neutral
(12 conductors or greater)
Materials
Conductors Stranded bare copper
Insulation
PVC/nylon
Jacket
Yellow, orange, or black
thermoplastic elastomer
Specifications
Conductors
Up to 65
Wire range
18 to 8 AWG (0.96 to 8.52 mm2)
Voltage rating
600 V
18 AWG (0.96 mm2)
Stranding: 19/30 (19 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.010 mm) nylon
Nominal Diameter
Part No.
Black Insul.
MP18103KW
MP18104KW
MP18105KW
MP18107KW
MP18112KW
MP18117KW
MP18122KW
MP18125KW
MP18134KW
MP18142KW
MP18149KW
MP18165KW
8
Blue Insul.
MP18103LW
MP18104LW
MP18105LW
MP18107LW
MP18112LW
MP18117LW
MP18122LW
MP18125LW
MP18134LW
MP18142LW
MP18149LW
MP18165LW
Conductors
Red Insul.
MP18103RW
MP18104LW
MP18105RW
MP18107RW
MP18112RW
MP18117RW
MP18122RW
MP18125RW
MP18134RW
MP18142RW
MP18149RW
MP18165RW
3
4
5
7
12
17
22
25
34
42
49
65
Inch
0.313
0.338
0.365
0.393
0.527
0.606
0.663
0.711
0.789
0.886
0.935
1.041
mm
7.95
8.58
9.27
9.98
13.39
15.39
16.84
18.06
20.04
22.50
23.75
26.44
Jacket
Thickness
Inch
0.050
0.050
0.050
0.050
0.065
0.065
0.065
0.065
0.065
0.085
0.085
0.085
mm
1.27
1.27
1.27
1.27
1.65
1.65
1.65
1.65
1.65
2.16
2.16
2.16
Series P Cables
16 AWG (1.32 mm2)
Stranding: 26/30 (26 x 0.25 mm)
Insulation thickness: 0.016 (0.41mm) PVC/0.005 (0.010 mm) nylon
Nominal Diameter
Part No.
Black Insul.
MP16103KW
MP16104KW
MP16105KW
MP16107KW
MP16112KW
MP16117KW
MP16122KW
MP16125KW
MP16133KW
MP16142KW
MP16149KW
MP16165KW
Jacket
Thickness
Conductors
Blue Insul.
MP16103LW
MP16104LW
MP16105LW
MP16107LW
MP16112LW
MP16117LW
MP16122LW
MP16125LW
MP16133LW
MP16142LW
MP16149LW
MP16165LW
Red Insul.
MP16103RW
MP16104RW
MP16105RW
MP16107RW
MP16112RW
MP16117RW
MP16122RW
MP16125RW
MP16133RW
MP16142RW
MP16149RW
MP16165RW
3
4
5
7
12
17
22
25
33
42
49
65
Inch
0.335
0.362
0.392
0.423
0.569
0.656
0.719
0.773
0.869
0.962
1.017
1.134
mm
8.51
9.19
9.96
10.74
14.45
16.66
18.26
19.63
22.07
24.43
25.83
28.80
Inch
0.050
0.050
0.050
0.050
0.065
0.065
0.065
0.065
0.085
0.085
0.085
0.085
mm
1.27
1.27
1.27
1.27
1.65
1.65
1.65
1.65
2.16
2.16
2.16
2.16
14 AWG (2.08 mm2)
Stranding: 41/30 (41 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.010 mm) nylon
Part No.
Black Insul.
MP14104KW
MP14105KW
MP14107KW
MP14112KW
MP14125KW
Nominal
Diameter
Conductors
Blue Insul.
MP14104LW
MP14105LW
MP14107LW
MP14112LW
MP14125LW
Red Insul.
MP14104RW
MP14105RW
MP14107RW
MP14112RW
MP14125RW
4
5
7
12
25
Inch
0.396
0.430
0.495
0.627
0.899
mm
10.06
10.92
12.57
15.93
22.83
Jacket
Thickness
Inch
0.050
0.050
0.065
0.065
0.085
mm
1.27
1.27
1.65
1.65
2.16
12 AWG (3.31 mm2)
Stranding: 65/30 (65 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm) PVC/0.005 (0.010 mm) nylon
Part No.
Black Insul.
MP12104KW
MP12105KW
MP12107KW
Nominal
Diameter
Conductors
Blue Insul.
MP12104LW
MP12105LW
MP12107LW
Red Insul.
MP12104RW
MP12105RW
MP12107RW
4
5
7
Inch
0.472
0.511
0.552
Jacket
Thickness
mm
11.99
12.98
14.02
Inch
0.065
0.065
0.065
mm
1.65
1.65
1.65
10 AWG (5.32 mm2)
Stranding: 105/30 (105 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm) PVC/0.005 (0.010 mm) nylon
Part No.
Black Insul.
MP10104KW
MP10105KW
MP10107KW
Conductors
Blue Insul.
MP10104LW
MP10105LW
MP10107LW
Red Insul.
MP10104RW
MP10105RW
MP10107RW
4
5
7
Nominal
Diameter
Inch
0.561
0.612
0.664
Jacket
Thickness
mm
14.25
15.54
16.87
Inch
0.065
0.065
0.065
mm
1.65
1.65
1.65
8 AWG (8.52 mm2)
Stranding: 168/30 (105 x 0.25 mm)
Insulation thickness: 0.032 (0.81 mm) PVC/0.005 (0.010 mm) nylon
Part No.
Black Insul.
MP08104KW
MP08105KW
Blue Insul.
MP08104LW
MP08105LW
Conductors
Red Insul.
MP08104RW
MP08105RW
4
5
Nominal Diameter
Inch
0.736
0.807
mm
18.69
20.50
Jacket
Thickness
Inch
0.065
0.065
mm
1.65
1.65
9
Series SF Servo Control Cable
Maximum Flexibility in Servo Control and Power
Series SF power servo cables bring a new level
of flexibility to the integration and monitoring
of servo drives.
Applications
Designed specifically for connecting power
between the supply and servo motors, drives,
and controllers, Series SF cables feature a
flexible TPE jacket and PVC/nylon insulation,
making them suitable for flexing applications
that require continuous movement.
• C
artesian and articulated
motion control
The cables are available in two configurations.
The power cable has four conductors for
power and ground. The composite cable adds
two additional individually shielded twisted
pairs for brake or temperature control.
UL TC-ER UL WTTC
UL Oil Res. I/II UL Sunlight Resistant
CSA AWM I/II A/B FT4
CSA CIC
CSA TC
CE compliant
RoHS compliant
• Easier routing and installation
Voltage rating
600/1000 V
• Machine tools
Temperature range
-25°C to +90°C
• Pick and place equipment
Specifications
• Automated material handling systems
Approvals
Suitable for use Class I, Division 2
locations per Article 501 of the National
Electric Code
Specifications
Conductors
4 power
4 power + 2 pairs for control
• Allows continuous flexing
• O
ptional pairs for temperature and
brake control
Color Coding
Black, blue, or red
numbered conductors
One green/yellow
ground conductor
One white striped neutral
(12 conductors or greater)
Materials
Conductors Stranded tinned copper
Shielding coverage
Foil + braid shielding: aluminum/polyester foil and tinned copper braid, 85%
Insulation
PVC/nylon
Wire range
18 to 8 AWG (0.96 to 8.50 mm2)
Jacket
Orange thermoplastic elastomer
Flexible Power Servo Cable
4 conductors for power/ground
Part No.
Conductors
SF61118CY
SF61116CY
SF61114CY
SF61112CY
SF61110CY
SF61108CY
4
4
4
4
4
4
Wire Size
AWG
mm2
18
0.96
16
1.32
14
2.09
12
3.31
10
5.32
8
8.50
Stranding
AWG
mm
19/30
19 x 0.25
26/30
26 x 0.25
41/30
41 x 0.25
65/30
65 x 0.25
105/30
105 x 0.25
168/30
168 x 0.25
Nominal Diameter
Inch
mm
0.384
9.75
0.408
10.36
0.442
11.23
0.508
12.90
0.605
15.37
0.787
19.99
Jacket Thickness
Inch
mm
0.055
1.40
0.055
1.40
0.055
1.40
0.065
1.65
0.065
1.65
0.065
1.65
Flexible Composite Servo Cable
4 conductors for power/ground +2 individually shielded pairs for brake or temperature control
10
Part No.
Conductors
SF61220CY
4 +2 pairs
SF61221CY
4 +2 pairs
SF61222CY
4 +2 pairs
SF61223CY
4 +2 pairs
SF61224CY
4 +2 pairs
Wire Size
AWG
mm2
16 pwr
1.32
18 pr
0.96
14 pwr
2.09
18 pr
0.96
12 pwr
3.31
16 pr
1.32
10 pwr
5.37
16 pr
1.32
8 pwr
8.50
16 pr
1.32
Stranding
AWG
mm
26/30
26 x 0.25
19/30
19 x 0.25
41/30
41 x 0.25
19/30
19 x 0.25
65/30
65 x 0.25
26/30
26 x 0.25
105/30
105 x 0.25
26/30
26 x 0.25
168/30
168 x 0.25
26/30
26 x 0.25
Nominal Diameter
Inch
mm
Jacket Thickness
Inch
mm
0.592
15.04
0.065
1.65
0.620
15.75
0.065
1.65
0.676
17.17
0.065
1.65
0.759
19.28
0.065
1.65
0.945
24.00
0.085
2.16
Series XM
Tough PVC Cable for Continuous Flex Control Applications
Featuring a specially formulated, premiumgrade PVC jacket and fine stranding, Series
XM flexible control cable is the ideal choice
for medium- to high-flex applications. Series
XM offers a durable, oil-resistant construction
that prevents contamination from hazardous
fluids and protects against abrasion. Series XM
is also available in shielded versions to address
environments where EMI may be an issue.
• S
pecially formulated PVC jacket for
continuous flex applications
• F
inely stranded conductors for
better flexibility
• P
VC jacket and insulation resist moisture,
oils, coolants, and UV radiation
Applications
• Continuous-flex applications
Wire range
18 to 8 AWG (1.32 to 13.49 mm2)
• H
igh-speed pick-and-place
robotic systems
Voltage rating
600/1000 V
• A
utomated material handling
equipment
Specifications
• Conveyors
• Transfer shuttles
Temperature range -30°C to +90°C (static)
-5°C to +90°C (dynamic)
Approvals
Color Coding
Black, blue, or red
numbered conductors
Meets NFPA Standard 79 for
industrial machinery
One green/yellow ground conductor
UL TC-ER
UL MTW
UL WTTC
UL Oil Res. I
UL Sunlight Resistant
CSA AWM I/II A/B FT4
CE compliant
RoHS compliant
California Prop 65
Materials
Specifications
Jacket
Black PVC
• Flex track installations
Conductors
Up to 65
Conductors Stranded bare copper
Shielding
Tinned copper braid,
85% coverage, or unshielded
Insulation
PVC/nylon
18 AWG (0.83 mm2)
41/34 (41 x 0.16 mm) Stranding
Red
XM1803R
XM1804R
XM1805R
XM1807R
XM1812R
XM1817R
XM1822R
XM1825R
XM1834R
XM1842R
XM1849R
XM1865R
Part No. (Unshielded*)
Blue
Black
XM1803L
XM1803K
XM1804L
XM1804K
XM1805L
XM1805K
XM1807L
XM1807K
XM1812L
XM1812K
XM1817L
XM1817K
XM1822L
XM1822K
XM1825L
XM1825K
XM1834L
XM1834K
XM1842L
XM1842K
XM1849L
XM1849K
XM1865L
XM1865K
Conductors
3
4
5
7
12
17
22
25
34
42
49
65
Nominal Diameter
Inch
mm
0.308
7.82
0.333
8.46
0.360
9.14
0.418
10.62
0.485
12.32
0.597
15.16
0.656
16.66
0.717
18.21
0.775
19.69
0.874
22.20
0.965
24.51
1.052
26.72
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.16
0.085
2.16
0.085
2.16
*Braid shielded versions are available in constructions up to 49 conductors. To order a shielded version add “CY” to the end of the desired part number.
We also offer custom configurations. To learn more, visit www.alphawire.com or call 800-52 ALPHA.
11
Series XM Cables
16 AWG (1.31 mm2)
65/34 (65 x 0.16 mm) Stranding
Red
XM1603R
XM1604R
XM1605R
XM1607R
XM1612R
XM1617R
XM1619R
XM1622R
XM1625R
XM1633R
XM1642R
XM1649R
XM1665R
Part No. (Unshielded*)
Blue
Black
XM1603L
XM1603K
XM1604L
XM1604K
XM1605L
XM1605K
XM1607L
XM1607K
XM1612L
XM1612K
XM1617L
XM1617K
XM1619L
XM1619K
XM1622L
XM1622K
XM1625L
XM1625K
XM1633L
XM1633K
XM1642L
XM1642K
XM1649L
XM1649K
XM1665L
XM1665K
Conductors
3
4
5
7
12
17
19
22
25
33
42
49
65
Nominal Diameter
Inch
mm
0.334
8.48
0.362
9.19
0.393
9.98
0.459
11.66
0.565
14.35
0.657
16.69
0.691
17.55
0.724
18.39
0.793
20.14
0.899
22.83
0.966
24.54
1.069
27.15
1.168
29.67
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.16
0.085
2.16
0.085
2.16
0.085
2.16
14 AWG (2.11 mm2)
105/34 (105 x 0.16 mm) Stranding
XM1403R
XM1404R
XM1405R
XM1407R
XM1412R
XM1403L
XM1404L
XM1405L
XM1407L
XM1412L
XM1403K
XM1404K
XM1405K
XM1407K
XM1412K
3
4
5
7
12
0.366
0.398
0.464
0.539
0.627
9.30
10.11
11.79
13.69
15.93
0.050
0.050
0.065
0.065
0.065
1.27
1.27
1.65
1.65
1.65
10.95
12.73
13.84
16.26
0.050
0.065
0.065
0.065
1.27
1.65
1.65
1.65
12.37
14.35
15.70
18.52
0.050
0.065
0.065
0.065
1.27
1.65
1.65
1.65
17.04
18.72
0.065
0.065
1.65
1.65
12 AWG (3.38 mm2)
168/34 (168 x 0.16 mm) Stranding
XM1203R
XM1204R
XM1205R
XM1207R
XM1203L
XM1204L
XM1205L
XM1207L
XM1203K
XM1204K
XM1205K
XM1207K
3
4
5
7
0.431
0.501
0.545
0.640
10 AWG (5.32 mm2)
105/30 (105 x 0.25 mm) Stranding
XM1003R
XM1004R
XM1005R
XM1007R
XM1003L
XM1004L
XM1005L
XM1007L
XM1003K
XM1004K
XM1005K
XM1007K
3
4
5
7
0.487
0.565
0.618
0.729
8 AWG (8.51 mm2)
168/30 (168 x 0.25 mm) Stranding
XM0803R
XM0804R
XM0803L
XM0804L
XM0803K
XM0804K
3
4
0.671
0.737
*Braid shielded versions are available in constructions up to 49 conductors. To order a shielded version add “CY” to the end of the desired part number.
We also offer custom configurations. To learn more, visit www.alphawire.com or call 800-52 ALPHA.
12
Series V VFD Cables
Exceptionally Consistent Performance for Variable-Speed Drives
Series V cables for variable-frequency drives
(VFD) set the standard in high-performance
and reliable connectivity. Their specially
formulated cross-linked polyethylene insulation
provides superior corona resistance, low
capacitance for longer runs, and excellent
low-temperature properties.
A symmetrical design places the ground wires
in the interstices of the conductors for uniform
conductor-to-ground capacitance
and impedance.
Smaller gauge cable feature a combination
foil/braid shield to offer exceptional EMI/RFI
protection in noisy environments. On larger
gauge cable, a double copper tape is used to
provide the same noise-free operation.
This uniformity reduces the probability of
motor damage from common-mode current.
Alpha Series V VFD cables are compatible with
drives from all major manufacturers.
• S
ymmetrical geometry for uniform
electrical properties
• L
ow-capacitance construction for
improved signal transmission and
extended cable runs
• R
esists potential effects of harmonics,
power distortion, and transient noise
• O
utstanding oil, solvent, chemical, and
fuel resistance
• R
ound geometry helps ensure a
liquid-tight installation per IP67 or NEMA 6
Approvals
Suitable for use in Class I, Division 2
per Article 501 of the National
Electric Code
Approvals
UL RHW-2 (16 – 2 AWG)
UL XHHW-2
UL TC-ER
UL 1000 V Flexible Motor Supply Cable
UL Direct Burial locations
UL Sunlight Resistant
CSA AWM I/II A/B FT4
CE LVD 73/23/EEC Amendment 93/68/EEC
Pennsylvania MHSA
Specifications
Wire range
16 to 4/0 AWG
Voltage rating
600/1000 V
Temperature range -40°C to +90°C
Materials
Conductors Stranded tinned copper
Ground Wires Stranded tinned copper
Insulation
Cross-linked polyethylene
Shielding
16 – 4 AWG: aluminum/polyester/
aluminum foil and tinned copper braid
with 85% coverage
2 – 4/0 AWG: double-layer
copper tape
Jacket
Premium PVC, black
Series V-Flex
Approvals
UL Standard 1277, Type TC-ER,
90°C, 600 Volt
CE-LVD: 2006/95/EC
UL Sunlight Resistant
UL Oil Res I/II
UL Type XHHW-2 Wet/Dry
UL Type RHW-2 Wet/Dry
UL 1000 Volt Flexible Motor
Supply Cable
CSA FT4 Vertical Tray
CSA CIC Control
CSA TC
CSA -40°C Cold Bend
RoHS Compliant
Specifications
Wire range
16 to 4 AWG
Voltage rating
600/1000 V
Temperature range -40°C to +90°C
Materials
Conductors Stranded tinned copper
Ground Wires Stranded tinned copper
Insulation
Cross-linked polyethylene
Shielding
16 – 4 AWG: aluminum/polyester/
aluminum foil and tinned copper
braid with 85% coverage
Jacket
Thermoplastic elastomer, black
• D
ouble shielded for superior EMI
performance
• S
pecially formulated XLPE conductor
insulation will not degrade under heavy
electrical load
• C
apable of handling the effects of wave
reflections on long cable runs
13
Series V VFD Cables
Three-Conductor VFD Cables
Part No.
V16316
V16314
V16312
V16310
V16308
V16306
V16304
V16302
V16001
V16000
V16020
V16030
V16040
Wire Size
AWG
mm2
16
1.32
14
2.09
12
3.31
10
5.37
8
8.53
6
13.57
4
21.58
2
34.32
1
43.28
1/0
54.58
2/0
68.85
3/0
86.9
4/0
109
Stranding
AWG
mm
26/30
26 x 0.25
41/30
41 x 0.25
65/30
65 x 0.25
105/30
105 x 0.25
133/29
133 x 0.28
133/27
133 x 0.36
133/25
133 x 0.45
133/23
133 x 0.57
133/22
133 x 0.64
133/21
133 x 0.72
133/20
133 x 0.81
133/19
133 x 0.91
133/18
133 x 1.02
Insulation Thickness
Inch
mm
0.046
1.17
0.046
1.17
0.046
1.17
0.047
1.19
0.061
1.55
0.061
1.55
0.061
1.55
0.061
1.55
0.056
1.42
0.056
1.42
0.056
1.42
0.056
1.42
0.056
1.42
Shielding
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Tape
Tape
Tape
Tape
Tape
Tape
Jacket Thickness
Inch
mm
0.050
1.27
0.065
1.65
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.15
0.085
2.15
0.085
2.15
0.085
2.15
0.085
2.15
0.085
2.15
0.085
2.15
0.085
2.15
Nominal Diameter
Inch
mm
0.471
11.96
0.542
13.77
0.581
14.76
0.645
16.38
0.801
20.35
0.927
23.55
1.053
26.75
1.157
29.39
1.197
30.48
1.294
32.77
1.399
35.56
1.517
38.53
1.653
41.98
Jacket Thickness
Inch
mm
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.15
0.086
2.15
0.086
2.15
0.086
2.15
0.088
2.15
Nominal Diameter
Inch
mm
0.547
13.89
0.584
14.83
0.633
16.08
0.746
18.95
0.920
23.37
1.017
25.83
1.157
29.39
1.308
33.22
Jacket Thickness
Inch
mm
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.15
0.085
2.15
Nominal Diameter
Inch
mm
0.717
18.21
0.743
18.87
0.785
19.94
0.875
22.23
1.032
26.21
Four-Conductor VFD Cable
Part No.
V16016
V16014
V16012
V16010
V16008
V16006
V16004
V16002
Wire Size
AWG
mm2
16
1.32
14
2.09
12
3.31
10
5.37
8
8.53
6
13.57
4
21.58
2
34.32
Stranding
AWG
mm
26/30
26 x 0.25
41/30
41 x 0.25
65/30
65 x 0.25
105/30
105 x 0.25
133/29
133 x 0.28
133/27
133 x 0.36
133/25
133 x 0.45
133/23
133 x 0.57
Insulation Thickness
Inch
mm
0.047
1.19
0.047
1.19
0.047
1.19
0.047
1.19
0.061
1.55
0.061
1.55
0.061
1.55
0.061
1.55
Shielding
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Four-Conductor VFD Cable with 14 AWG (2.09) Brake Pair
Part No.
V16116
V16114
V16112
V16110
V16108
Wire Size
AWG
mm2
16
1.32
14
2.09
12
3.31
10
5.37
8
8.53
Stranding
AWG
mm
26/30
26 x 0.25
41/30
41 x 0.25
65/30
65 x 0.25
105/30
105 x 0.25
133/29
133 x 0.28
Insulation Thickness
Inch
mm
0.047
1.19
0.047
1.19
0.047
1.19
0.047
1.19
0.061
1.55
Shielding
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Foil/Braid
Series V-Flex
Part No.
VF16016
VF16014
VF16012
VF16010
VF16008
VF16006
VF16004
14
Wire Size
AWG
mm2
16
1.32
14
2.08
12
3.29
10
5.32
8
8.61
6
13.6
4
21.6
Stranding
AWG
mm
26/30
26 x 0.254
41/30
41 x 0.254
65/30
65 x 0.254
105/30
105 x 0.254
133/29
133 x 0.287
133/27
133 x 0.361
133/25
133 x 0.455
Insulation Thickness
Inch
mm
0.046
1.17
0.046
1.17
0.046
1.17
0.047
1.19
0.061
1.55
0.061
1.55
0.061
1.55
Jacket Thickness
Inch
mm
0.065
1.65
0.065
1.65
0.065
1.65
0.085
2.16
0.086
2.18
0.086
2.18
0.086
2.18
Outside Diameter
Inch
mm
0.545
13.84
0.584
14.83
0.631
16.03
0.75
19.05
0.92
23.37
1.017
25.83
1.157
29.39
Flexible Motor Supply Cable
Tough, High-Performance Flexible Cable for Motor and
Drive Applications
Now you can get the exceptional performance
with Alpha Wire’s flexible motor supply cable.
The symmetrical design of the cables results
in a smaller diameter and easier routing of
connectors to servomotors, AC drives, and
variable-frequency drives (VFD).
Applications
Materials
Ideal for motor, drive, wind turbine, and
light-duty VFD applications
Conductors Stranded bare copper
Approvals
Insulation
PVC/nylon
The combination of the conductor stranding
and overall cable design make the product
suitable for applications that require better
flexibility. The cables are MTW-rated and meet
the requirements of NFPA 79, allowing them
to be used in industrial machinery applications.
UL TC-ER
UL MTW
UL WTTC
UL Oil Res. I
UL Sunlight Resistant
UL Direct Burial
CSA AWM I/II A/B FT4
CE compliant
RoHS compliant
The cables feature our double shielded foil
plus braid combination of tinned copper braid
and double layer of aluminum foil on polyester
to offer exceptional EMI performance across
the widest range of frequencies.
Suitable for use Class I, Division 2
locations per Article 501 of the National
Electric Code
Specifications
Conductors
4
Wire range
16 to 6 AWG (1.32 to 13.49 mm2)
• M
eet NFPA Standard 79 for industrial
machinery
Voltage rating
600/1000 V
• P
remium PVC jacket for outstanding
sunlight and oil resistance
Temperature range -40°C to +90°C
• F
oil/braid shielding for exceptional
EMI protection
Shielding
Foil + braid shield: Aluminum/
polyester/aluminum foil shield,
with 25% overlap and four tinned
copper drain wires plus tinned
copper braid with 70% coverage
Color Coding
One yellow/green and three numbered
black conductors
• Ideal for motor, drive, wind turbine, and
light-duty VFD applications
16 to 6 AWG (1.49 to 5.33 mm2)
Part No.
Conductors
5660
5661
5662
5663
5664
5665
4
4
4
4
4
4
Wire Size
AWG
mm2
16
1.32
14
2.08
12
3.30
10
5.32
8
8.52
6
13.49
Stranding
AWG
mm
26/30
26 x 0.25
41/30
41 x 0.25
65/30
65 x 0.25
105/30
105 x 0.25
168/30
168 x 0.25
266/30
266 x 0.25
Nominal Diameter
Inch
mm
0.381
9.67
0.418
10.61
0.464
11.78
0.579
14.70
0.760
19.30
0.901
22.88
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.063
1.60
0.063
1.60
0.083
2.10
Insulation Thickness
Inch
mm
0.016
0.40
0.016
0.40
0.016
0.40
0.022
0.55
0.032
0.81
0.032
0.81
15
Xtra-Guard® Flex Cables
More Choice for High-Performance Flexing Applications
Meet a wide range of flexing needs
with Xtra-Guard Flex cables, from
light flexing to continuous multiaxis
flexing. These long-lasting flexible
cables are designed to provide
excellent performance in high-flex,
high-torsion, and continuous-flex
applications, such as motion control
and robotics.
With the range of choices, it’s easy
to select the cable matched to the
demands of your application.
Standard Flex
(65000 Series)
Continuous
Flex Control
(85000 Series)
Continuous
Flex Data
(86000 Series)
Torsonal Flex
(87000 Series)
Flex Cycles
(million)
1
14
6
1
Configurations
Multiconductor
Multiconductor
Multiconductor
Conductors
Bare copper
Insulation
Jacket
Shielding
Options
Lub. SR-PVC
PVC
Unshielded
Braid
Numbered black
1 green/yellow
Slate jacket
600
Tin-plated
copper
Lub. PVC
PVC
Unshielded
Braid
Numbered red
1 green/yellow
Black jacket
600
Multiconductor
Multipair
Tin-plated
copper
Lub. SR-PVC
PVC
Unshielded
Foil + braid
-5°C to +90°C
Conductor
Color Coding
Voltage Rating
Temperature
Range, Flexing
Temperature
Range,
Stationary
Approvals
Bare copper
300
TPE
PUR
Unshielded
Spiral
Numbered black
1 green/yellow
Slate jacket
600
-5°C to +90°C
+5°C to +105°C
-10°C to +80°C
-40°C to +90°C
-40°C to +90°C
-10°C to +105°C
-30°C to +80°C
UL AWM 2587
CSA AWM I/II
A/B FT1
CE
UL AWM 2587
CSA AWM I/II
A/B FT1
CE
UL CM
UL AWM 2661
CSA AWM I/II
A/B FT4
CSA CMG
CE
UL AWM 20234
CSA AWM I/II
A/B FT1
CE
Multicolored
Slate jacket
Standard Flex: Multiconductor Unshielded
16
20 AWG (0.51 mm2)
18 AWG (0.81 mm2)
Stranding: 10/30 (10 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 16/30 (16 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
65002
65003
65004
65005
65007
65009
65012
65018
65025
2
3
4
5
7
9
12
18
25
Nominal Diameter
Inch
mm
0.238
6.05
0.251
6.38
0.272
6.91
0.305
7.75
0.327
8.31
0.416
10.57
0.433
11.00
0.527
13.39
0.615
15.62
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.038
0.97
0.038
0.97
0.040
1.02
0.045
1.14
0.055
1.40
0.055
1.40
Part No.
Conductors
65802
65803
65804
65805
65807
65809
65812
65818
65825
65834
65841
65850
2
3
4
5
7
9
12
18
25
34
41
50
Nominal Diameter
Inch
mm
0.258
6.55
0.272
6.91
0.296
7.52
0.326
8.28
0.351
8.92
0.445
11.30
0.470
11.94
0.567
14.40
0.666
16.92
0.769
19.53
0.835
21.21
0.967
24.56
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.035
0.89
0.035
0.89
0.035
0.89
0.043
1.09
0.050
1.27
0.050
1.27
0.060
1.52
0.063
1.60
0.083
2.11
Xtra-Guard® Flex Cables
16 AWG (1.32 mm2)
14 AWG (2.08 mm2)
Stranding: 26/30 (26 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 41/30 (41 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
65602
65603
65604
65605
65607
65609
65612
65618
65625
65641
65650
2
3
4
5
7
9
12
18
25
41
50
Nominal Diameter
Inch
mm
0.284
7.21
0.300
7.62
0.328
8.33
0.361
9.17
0.390
9.91
0.509
12.93
0.536
13.61
0.632
16.05
0.756
19.20
0.959
24.36
1.079
27.41
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.035
0.89
0.035
0.89
0.041
1.04
0.049
1.24
0.050
1.27
0.055
1.40
0.075
1.90
0.083
2.11
Part No.
Conductors
65402
65403
65404
65405
65407
65409
65412
65418
65425
2
3
4
5
7
9
12
18
25
Nominal Diameter
Inch
mm
0.330
8.38
0.351
8.92
0.404
10.26
0.439
11.15
0.479
12.17
0.609
15.47
0.667
16.94
0.783
19.89
0.953
24.21
Jacket Thickness
Inch
mm
0.044
1.12
0.045
1.14
0.055
1.40
0.055
1.40
0.058
1.47
0.063
1.60
0.085
2.16
0.090
2.29
0.110
2.79
12 AWG (3.29 mm2)
10 AWG (5.32 mm2)
Stranding: 65/30 (65 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 105/30 (105 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
65203
65204
65205
65207
3
4
5
7
Nominal Diameter
Inch
mm
0.436
11.07
0.500
12.70
0.553
14.05
0.592
15.04
Jacket Thickness
Inch
mm
0.067
1.70
0.080
2.03
0.086
2.18
0.086
2.18
Part No.
Conductors
65103
65104
65105
3
4
5
Nominal Diameter
Inch
mm
0.516
13.11
0.568
14.43
0.629
15.98
Jacket Thickness
Inch
mm
0.080
2.03
0.084
2.13
0.090
2.29
8 AWG (8.32 mm2)
6 AWG (13.44 mm2)
Stranding: 65/26 (65 x 0.40 mm)
Insulation thickness: 0.032 (0.81 mm)
Stranding: 105/26 (105 x 0.40 mm)
Insulation thickness: 0.047 (1.19 mm)
Part No.
Conductors
65904
65905
4
5
Nominal Diameter
Inch
mm
0.691
17.55
0.765
19.43
Jacket Thickness
Inch
mm
0.085
2.16
0.090
2.29
Part No.
Conductors
65704
65705
4
5
Nominal Diameter
Inch
mm
0.891
22.63
0.985
25.02
Jacket Thickness
Inch
mm
0.100
2.54
0.105
2.67
4 AWG (21.5 mm2)
2 AWG (34.05 mm2)
Stranding: 168/26 (168 x 0.40 mm)
Insulation thickness: 0.047 (1.19 mm)
Stranding: 266/26 (266 x 0.40 mm)
Insulation thickness: 0.047 (1.19 mm)
Part No.
Conductors
65504
65505
4
5
Nominal Diameter
Inch
mm
1.080
27.43
1.207
30.66
Jacket Thickness
Inch
mm
0.100
2.54
0.110
2.79
Part No.
Conductors
65304
65305
4
5
Nominal Diameter
Inch
mm
1.273
32.33
1.428
36.27
Jacket Thickness
Inch
mm
0.120
3.05
0.135
3.43
Standard Flex: Multiconductor Braid Shielded
20 AWG (0.51 mm2)
18 AWG (0.81 mm2)
Stranding: 10/30 (10 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 16/30 (16 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
65003CY
65007CY
65012CY
65025CY
3
7
12
25
Nominal Diameter
Inch
mm
0.339
8.61
0.409
10.39
0.521
13.23
0.712
18.08
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.040
1.02
0.050
1.27
Part No.
Conductors
65803CY
65804CY
65805CY
65807CY
65812CY
65818CY
65825CY
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.360
9.14
0.384
9.75
0.414
10.52
0.439
11.15
0.568
14.43
0.671
17.04
0.776
19.71
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.035
0.89
0.045
1.14
0.053
1.35
0.053
1.35
17
Xtra-Guard® Flex Cables
16 AWG (1.32 mm2)
14 AWG (2.08 mm2)
Stranding: 26/30 (26 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 41/30 (41 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
65603CY
65604CY
65605CY
65607CY
65612CY
65618CY
65625CY
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.388
9.86
0.416
10.57
0.449
11.40
0.484
12.29
0.640
16.26
0.767
19.48
0.901
22.89
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.035
0.89
0.052
1.32
0.062
1.57
0.067
1.70
Part No.
Conductors
65403CY
65404CY
65405CY
65407CY
65412CY
65418CY
3
4
5
7
12
18
Nominal Diameter
Inch
mm
0.443
11.25
0.486
12.34
0.537
13.64
0.581
14.76
0.732
18.59
0.890
22.61
Jacket Thickness
Inch
mm
0.042
1.07
0.047
1.19
0.052
1.32
0.057
1.45
0.062
1.57
0.083
2.11
12 AWG (3.31 mm2)
10 AWG (5.32 mm2)
Stranding: 65/30 (65 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 105/30 (105 x 0.25 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
65203CY
65204CY
65205CY
3
4
5
Nominal Diameter
Inch
mm
0.530
13.46
0.616
15.65
0.671
17.04
Jacket Thickness
Inch
mm
0.060
1.52
0.066
1.68
0.073
1.85
Part No.
Conductors
65103CY
65104CY
65105CY
65107CY
3
4
5
7
Nominal Diameter
Inch
mm
0.630
16.00
0.684
17.37
0.757
19.23
0.823
20.90
Jacket Thickness
Inch
mm
0.070
1.78
0.070
1.78
0.077
1.96
0.083
2.11
8 to 2 AWG (8.32 to 34.05 mm2)
Part No.
Conductors
65904CY
65704CY
65504CY
65304CY
4
4
4
4
Wire Size
AWG
mm2
8
8.32
6
13.44
4
21.55
2
34.05
Stranding
AWG
mm
65/26
65 x 0.40
105/26
105 x 0.40
168/26
168 x 0.40
266/26
266 x 0.40
Nominal Diameter
Inch
mm
0.822
20.88
1.062
26.97
1.251
31.78
1.453
36.91
Jacket Thickness
Inch
mm
0.075
1.90
0.100
2.54
0.100
2.54
0.110
2.79
Insulation Thickness
Inch
mm
0.032
0.81
0.047
1.19
0.047
1.19
0.047
1.19
Continuous Flex Control: Multiconductor Unshielded
18
20 AWG (0.51 mm2)
18 AWG (0.85 mm2)
Stranding: 63/38 (63 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 105/38 (105 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
85003
85004
85005
85007
85012
85018
85025
85034
3
4
5
7
12
18
25
34
Nominal Diameter
Inch
mm
0.272
6.91
0.297
7.54
0.323
8.20
0.388
9.86
0.460
11.68
0.548
13.92
0.691
17.55
0.746
18.95
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.040
1.02
0.045
1.14
0.050
1.27
0.065
1.65
0.065
1.65
Part No.
Conductors
85803
85804
85805
85807
85812
85815
85818
85825
85834
3
4
5
7
12
15
18
25
34
Nominal Diameter
Inch
mm
0.298
7.57
0.326
8.28
0.355
9.02
0.438
11.13
0.520
13.21
0.577
14.66
0.608
15.44
0.767
19.48
0.830
21.08
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.045
1.14
0.050
1.27
0.050
1.27
0.050
1.27
0.065
1.65
0.065
1.65
16 AWG (1.36mm2)
14 AWG (2.16mm2)
Stranding: 168/38 (168 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 266/38 (266 x 0.10 mm)
Insulation thickness: 0.022” (0.56 mm)
Part No.
Conductors
85603
85604
85605
85607
85612
85618
85625
85634
85650
3
4
5
7
12
18
25
34
50
Nominal Diameter
Inch
mm
0.331
8.41
0.362
9.19
0.396
10.06
0.478
12.14
0.573
14.55
0.674
17.12
0.862
21.89
0.936
23.77
1.161
29.49
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.035
0.89
0.040
1.02
0.045
1.14
0.045
1.14
0.065
1.65
0.065
1.65
0.085
2.16
Part No.
Conductors
85404
85407
4
7
Nominal Diameter
Inch
mm
0.424
10.77
0.582
14.78
Jacket Thickness
Inch
mm
0.050
1.27
0.070
1.78
Xtra-Guard® Flex Cables
12 AWG (3.35 mm2)
10 AWG (5.34 mm2)
Stranding: 413/38 (413 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 658/38 (658 x 0.10 mm)
Insulation thickness: 0.022” (0.56 mm)
Part No.
Conductors
85204
85207
4
7
Nominal Diameter
Inch
mm
0.527
13.39
0.729
18.52
Jacket Thickness
Inch
mm
0.070
1.78
0.100
2.54
Part No.
Conductors
85104
85107
4
7
Nominal Diameter
Inch
mm
0.590
14.99
0.816
20.73
Jacket Thickness
Inch
mm
0.070
1.78
0.100
2.54
Jacket Thickness
Inch
mm
0.070
1.78
0.085
2.16
0.085
2.16
0.085
2.16
Insulation Thickness
Inch
mm
0.032
0.81
0.047
1.19
0.047
1.19
0.047
1.19
8 to 2 AWG (8.62 to 33.86 mm2)
Part No.
Conductors
85904
85704
85504
85304
4
4
4
4
Wire Size
AWG
mm2
8
8.62
6
13.38
4
21.55
2
33.86
Stranding
AWG
mm
266/32
266 x 0.20
413/32
413 x 0.20
665/32
665 x 0.20
1045/32
1045 x 0.20
Nominal Diameter
Inch
mm
0.721
18.31
0.935
23.75
1.076
27.33
1.250
31.75
Continuous Flex Control: Multiconductor Braid Shielded
20 AWG ( 0.51 mm2)
18 AWG (0.85 mm2)
Stranding: 63/38 (63 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 105/38 (105 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Part No.
Conductors
85003CY
85004CY
85005CY
85007CY
85010CY
85012CY
85018CY
85025CY
3
4
5
7
10
12
18
25
Nominal Diameter
Inch
mm
0.350
8.89
0.375
9.53
0.411
10.44
0.482
12.24
0.545
13.84
0.564
14.33
0.662
16.81
0.812
20.62
Jacket Thickness
Inch
mm
0.035
0.89
0.035
0.89
0.040
1.02
0.040
1.02
0.040
1.02
0.050
1.27
0.060
1.52
0.070
1.78
Part No.
Conductors
85803CY
85804CY
85805CY
85807CY
85812CY
85818CY
85825CY
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.376
9.55
0.414
10.52
0.453
11.51
0.532
13.51
0.634
16.10
0.725
18.42
0.908
23.06
Jacket Thickness
Inch
mm
0.035
0.89
0.040
1.02
0.040
1.02
0.045
1.14
0.060
1.52
0.060
1.52
0.080
2.03
16 AWG (1.36mm2)
14 AWG (2.16mm2)
Stranding: 168/38 (168 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 266/38 (266 x 0.10 mm)
Insulation thickness: 0.022” (0.56 mm)
Part No.
Conductors
85603CY
85604CY
85605CY
85607CY
85612CY
85615CY
85618CY
85625CY
85634CY
3
4
5
7
12
15
18
25
34
Nominal Diameter
Inch
mm
0.419
10.64
0.460
11.68
0.500
12.70
0.602
15.29
0.700
17.78
0.769
19.53
0.805
20.45
0.973
24.71
1.087
27.61
Jacket Thickness
Inch
mm
0.035
0.89
0.040
1.02
0.040
1.02
0.055
1.40
0.060
1.52
0.060
1.52
0.060
1.52
0.065
1.65
0.085
2.16
Part No.
Conductors
85404CY
85407CY
4
7
Nominal Diameter
Inch
mm
0.528
13.41
0.676
17.17
Jacket Thickness
Inch
mm
0.050
1.27
0.065
1.65
12 AWG (3.35 mm2)
10 AWG (5.34 mm2)
Stranding: 413/38 (413 x 0.10 mm)
Insulation thickness: 0.022 (0.56 mm)
Stranding: 658/38 (658 x 0.10 mm)
Insulation thickness: 0.022” (0.56 mm)
Part No.
Conductors
85204CY
85207CY
4
7
Nominal Diameter
Inch
mm
0.641
16.28
0.836
21.23
Jacket Thickness
Inch
mm
0.075
1.90
0.100
2.54
Part No.
Conductors
85104CY
85107CY
4
7
Nominal Diameter
Inch
mm
0.707
17.96
0.947
24.05
Jacket Thickness
Inch
mm
0.070
1.78
0.100
2.54
8 to 2 AWG (8.62 to 33.86 mm2)
Part No.
Conductors
85904CY
85704CY
85504CY
85304CY
4
4
4
4
Wire Size
AWG
mm2
8
8.62
6
13.38
4
21.55
2
33.86
Stranding
AWG
mm
266/32
266 x 0.20
413/32
413 x 0.20
665/32
665 x 0.20
1045/32 1045 x 0.20
Nominal Diameter
Inch
mm
0.882
22.40
1.066
27.08
1.227
31.17
1.431
36.35
Jacket Thickness
Inch
mm
0.085
2.16
0.085
2.16
0.085
2.16
0.095
2.41
Insulation Thickness
Inch
mm
0.032
0.81
0.047
1.19
0.047
1.19
0.047
1.19
19
Xtra-Guard® Flex Cables
Continuous Flex Data: Multiconductor Unshielded
28 AWG (0.09 mm2)
26 AWG (0.14 mm2)
Stranding: 7/36 (7 x 0.13 mm)
Insulation thickness: 0.010 (0.25 mm)
Stranding: 7/34 (7 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Part No.
Conductors
86002
86003
86004
86005
86007
86012
86018
86025
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.154
3.91
0.160
4.06
0.170
4.32
0.180
4.57
0.203
5.16
0.263
6.68
0.262
6.65
0.309
7.85
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
Part No.
Conductors
86102
86103
86104
86105
86107
86112
86118
86125
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.162
4.11
0.168
4.27
0.179
4.55
0.191
4.85
0.217
5.51
0.283
7.19
0.282
7.16
0.335
8.51
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
24 AWG (0.20 mm2)
22 AWG (0.38 mm2)
Stranding: 10/34 (10 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Stranding: 19/34 (19 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Part No.
Conductors
86202
86203
86204
86205
86207
86212
86218
86225
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.172
4.37
0.179
4.55
0.191
4.85
0.205
5.21
0.233
5.92
0.307
7.80
0.307
7.80
0.376
9.55
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
Part No.
Conductors
86302
86303
86304
86305
86307
86312
86318
86325
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.188
4.78
0.197
5.00
0.211
5.36
0.227
5.77
0.260
6.60
0.347
8.81
0.347
8.81
0.426
10.82
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
Continuous Flex Data: Multiconductor Foil/Spiral Shielded
20
28 AWG (0.09 mm2)
26 AWG (0.14 mm2)
Stranding: 7/36 (7 x 0.13 mm)
Insulation thickness: 0.010 (0.25 mm)
Stranding: 7/34 (7 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Part No.
Conductors
86002CY
86003CY
86004CY
86005CY
86007CY
86012CY
86018CY
86025CY
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.174
4.42
0.180
4.57
0.190
4.83
0.200
5.08
0.223
5.66
0.283
7.19
0.282
7.16
0.329
8.36
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
Part No.
Conductors
86102CY
86103CY
86104CY
86105CY
86107CY
86112CY
86118CY
86125CY
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.182
4.62
0.188
4.78
0.199
5.05
0.211
5.36
0.237
6.02
0.303
7.70
0.302
7.67
0.355
9.02
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
24 AWG (0.20 mm2)
22 AWG (0.38 mm2)
Stranding: 10/34 (10 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Stranding: 19/34 (19 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Part No.
Conductors
86202CY
86203CY
86204CY
86205CY
86207CY
86212CY
86218CY
86225CY
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.192
4.88
0.199
5.05
0.211
5.36
0.225
5.72
0.253
6.43
0.327
8.31
0.327
8.31
0.396
10.06
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
Part No.
Conductors
86302CY
86303CY
86304CY
86305CY
86307CY
86312CY
86318CY
86325CY
2
3
4
5
7
12
18
25
Nominal Diameter
Inch
mm
0.208
5.28
0.217
5.51
0.231
5.87
0.247
6.27
0.280
7.11
0.367
9.32
0.367
9.32
0.446
11.33
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
Xtra-Guard® Flex Cables
Continuous Flex Data: Multipair Foil + Braid Shielded
28 AWG (0.09 mm2)
26 AWG (0.14 mm2)
Stranding: 7/36 (7 x 0.13 mm)
Insulation thickness: 0.010 (0.25 mm)
Stranding: 7/34 (7 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Part No.
Pairs
86401CY
86402CY
86403CY
86404CY
86405CY
86406CY
86408CY
86410CY
86414CY
1
2
3
4
5
6
8
10
14
Nominal Diameter
Inch
mm
0.186
4.72
0.231
5.87
0.240
6.10
0.256
6.50
0.274
6.96
0.293
7.44
0.331
8.41
0.365
9.27
0.381
9.68
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
0.045
1.14
Part No.
Pairs
86501CY
86502CY
86503CY
86504CY
86505CY
86506CY
86508CY
86510CY
86514CY
1
2
3
4
5
6
8
10
14
Nominal Diameter
Inch
mm
0.194
4.93
0.244
6.20
0.254
6.45
0.272
6.91
0.292
7.42
0.313
7.95
0.355
9.02
0.392
9.96
0.426
10.82
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
0.053
1.35
24 AWG (0.20 mm2)
22 AWG (0.38 mm2)
Stranding: 10/34 (10 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Stranding: 19/34 (19 x 0.16 mm)
Insulation thickness: 0.010 (0.25 mm)
Part No.
Pairs
86601CY
86602CY
86603CY
86604CY
86605CY
86606CY
86608CY
86610CY
86614CY
1
2
3
4
5
6
8
10
14
Nominal Diameter
Inch
mm
0.204
5.18
0.260
6.60
0.272
6.91
0.292
7.42
0.314
7.98
0.337
8.56
0.385
9.78
0.427
10.85
0.463
11.76
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
0.053
1.35
Part No.
Pairs
86701CY
86702CY
86703CY
86704CY
86705CY
86706CY
86708CY
86710CY
86714CY
1
2
3
4
5
6
8
10
14
Nominal Diameter
Inch
mm
0.220
5.59
0.287
7.29
0.301
7.65
0.324
8.23
0.350
8.89
0.377
9.58
0.443
11.25
0.497
12.62
0.527
13.39
Jacket Thickness
Inch
mm
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.040
1.02
0.045
1.14
0.053
1.35
0.053
1.35
Torsional Flex: Multiconductor Unshielded
24 AWG (0.23 mm2)
22 AWG (0.38 mm2)
Stranding: 7/32 (7 x 0.20 mm)
Insulation thickness: 0.016 (0.41 mm)
Stranding: 19/34 (19 x 0.16 mm)
Insulation thickness: 0.016 (0.41 mm)
Part No.
Conductors
87003
87004
87005
87007
3
4
5
7
Nominal Diameter
Inch
mm
0.227
5.77
0.242
6.15
0.259
6.58
0.294
7.47
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
Part No.
Conductors
87103
87104
87105
87107
3
4
5
7
Nominal Diameter
Inch
mm
0.244
6.20
0.261
6.63
0.281
7.14
0.321
8.15
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
20 AWG (0.62 mm2)
18 AWG (0.96 mm2)
Stranding: 19/32 (19 x 0.20 mm)
Insulation thickness: 0.016 (0.41 mm)
Stranding: 19/30 (19 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm)
Part No.
Conductors
87203
87204
87205
87207
3
4
5
7
Nominal Diameter
Inch
mm
0.262
6.65
0.281
7.14
0.302
7.67
0.347
8.81
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
Part No.
Conductors
87303
87304
87305
87307
3
4
5
7
Nominal Diameter
Inch
mm
0.283
7.19
0.305
7.75
0.329
8.36
0.380
9.65
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
21
Xtra-Guard® Flex Cables
16 AWG (1.32 mm2)
14 AWG (2.07 mm2)
Stranding: 19/0.0117 (19 x 0.30 mm)
Insulation thickness: 0.016 (0.41 mm)
Stranding: 19/0.0147 (19 x 0.37 mm)
Insulation thickness: 0.027 (0.69 mm)
3
4
Nominal Diameter
Inch
mm
0.302
7.67
0.327
8.31
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
5
7
0.354
0.410
0.050
0.050
Part No.
Conductors
87403
87404
87405
87407
8.99
10.41
1.27
1.27
Part No.
Conductors
87503
87504
87505
87507
3
4
5
7
Nominal Diameter
Inch
mm
0.382
9.70
0.417
10.59
0.455
11.56
0.535
13.59
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
12 AWG (3.29 mm2)
10 AWG (5.22 mm2)
Stranding: 19/0.0185 (19 x 0.47 mm)
Insulation thickness: 0.027 (0.69 mm)
Stranding: 37/0.0167 (37 x 0.42 mm)
Insulation thickness: 0.030 (0.76 mm)
Part No.
Conductors
87603
87604
87605
87607
3
4
5
7
Nominal Diameter
Inch
mm
0.444
11.28
0.483
12.27
0.526
13.36
0.618
15.70
Jacket Thickness
Inch
mm
0.060
1.52
0.060
1.52
0.060
1.52
0.060
1.52
Part No.
Conductors
87703
87704
87705
87707
3
4
5
7
Nominal Diameter
Inch
mm
0.508
12.90
0.555
14.10
0.627
15.93
0.737
18.72
Jacket Thickness
Inch
mm
0.060
1.52
0.060
1.52
0.070
1.78
0.070
1.78
Torsional Flex: Multiconductor Braid Shielded
22
24 AWG (0.23 mm2)
22 AWG (0.38 mm2)
Stranding: 7/32 (7 x 0.20 mm)
Insulation thickness: 0.016 (0.41 mm)
Stranding: 19/34 (19 x 0.16 mm)
Insulation thickness: 0.016 (0.41 mm)
Part No.
Conductors
87003CY
87004CY
87005CY
87007CY
3
4
5
7
Nominal Diameter
Inch
mm
0.246
6.25
0.261
6.63
0.278
7.06
0.313
7.95
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
Part No.
Conductors
87103CY
87104CY
87105CY
87107CY
3
4
5
7
Nominal Diameter
Inch
mm
0.263
6.68
0.280
7.11
0.300
7.62
0.340
8.64
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
20 AWG (0.62 mm2)
18 AWG (0.96 mm2)
Stranding: 19/32 (19 x 0.20 mm)
Insulation thickness: 0.016 (0.41 mm)
Stranding: 19/30 (19 x 0.25 mm)
Insulation thickness: 0.016 (0.41 mm)
Part No.
Conductors
87203CY
87204CY
87205CY
87207CY
3
4
5
7
Nominal Diameter
Inch
mm
0.281
7.14
0.300
7.62
0.321
8.15
0.366
9.30
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
Part No.
Conductors
87303CY
87304CY
87305CY
87307CY
3
4
5
7
Nominal Diameter
Inch
mm
0.302
7.67
0.324
8.23
0.348
8.84
0.399
10.13
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
16 AWG (1.32 mm2)
14 AWG (2.07 mm2)
Stranding: 19/0.0117 (19 x 0.30 mm)
Insulation thickness: 0.016 (0.41 mm)
Stranding: 19/0.0147 (19 x 0.37 mm)
Insulation thickness: 0.027 (0.69 mm)
Part No.
Conductors
87403CY
87404CY
87405CY
87407CY
3
4
5
7
Nominal Diameter
Inch
mm
0.321
8.15
0.346
8.79
0.373
9.47
0.429
10.90
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
Part No.
Conductors
87503CY
87504CY
87505CY
87507CY
3
4
5
7
Nominal Diameter
Inch
mm
0.401
10.19
0.436
11.07
0.474
12.04
0.554
14.07
Jacket Thickness
Inch
mm
0.050
1.27
0.050
1.27
0.050
1.27
0.050
1.27
12 AWG (3.29 mm2)
10 AWG (5.22 mm2)
Stranding: 19/0.0185 (19 x 0.47 mm)
Insulation thickness: 0.027 (0.69 mm)
Stranding: 37/0.0167 (37 x 0.42 mm)
Insulation thickness: 0.030 (0.76 mm)
Part No.
Conductors
87603CY
87604CY
87605CY
87607CY
3
4
5
7
Nominal Diameter
Inch
mm
0.463
11.76
0.502
12.75
0.545
13.84
0.637
16.18
Jacket Thickness
Inch
mm
0.060
1.52
0.060
1.52
0.060
1.52
0.060
1.52
Part No.
Conductors
87703CY
87704CY
87705CY
87707CY
3
4
5
7
Nominal Diameter
Inch
mm
0.527
13.39
0.574
14.58
0.646
16.41
0.756
19.20
Jacket Thickness
Inch
mm
0.060
1.52
0.060
1.52
0.070
1.78
0.070
1.78
More Solutions to Make Any Equipment More Reliable and Productive
Xtra-Guard Industrial
Ethernet Cable
Industrial Automation Cable
Hook-Up Wire
Our line of Xtra-Guard
Industrial Ethernet Cat 5e
cables gives you rugged
connectivity for Industrial
Ethernet. You can specify the
exact cable you need from the
wide choices we offer in
materials, configurations, and
shielding to satisfy your
needs for flexibility, fluid
resistance, noise immunity,
and other challenging
application demands.
Our range of industrial
automation cables combines
the industry-leading quality
and exceptional reliability
you expect from Alpha Wire
with the performance to meet
the rigorous requirements
of the major automation
communication architectures,
including ControlNet™, RS-485,
DeviceNet™, Fieldbus Types A,
B, and High Speed, PROFIBUS®
DP, and Industrial Twinax.
The broad range of hook-up
wire from Alpha means you
will find the product exactly
suited to your application—
whether it’s as straightforward
as a control cabinet in a
protected environment or as
specialized as a machine
tool on the factory floor, a
high-temperature oven, or a
solar farm.
FIT® Heat-Shrink Tubing
FIT Wire Management
Eco-Wire™ Hook-Up Wire
FIT heat-shrink tubing seals
and protects wire and cables
from environmental and
mechanical abuse—with a wide
variety of shrink ratios and
materials. The FIT line consists
of various tubing types,
each designed with unique
attributes that offer tubing
solutions for the broadest
possible range of applications
and environments.
FIT wire management
accessories to make any
installation easier to protect,
manage, and maintain. Protect
cables with woven sleeves,
rigid and flexible tubing,
and EMI shielding/grounding
products—available to
suited applications needs
from the simplest to the
most demanding.
Our innovative EcoWire
combines 100% recyclable,
eco-friendly design and
materials with rugged
performance. Saving space
and weight, EcoWire is 45%
smaller in diameter and 40%
lighter than equivalent PVC
wires of the same gauge.
And it offers 10x the abrasion
resistance and the same
electrical performance.
23
The cables you trust.
The service you deserve.
Every application is critical and
cable failure is not an option
when the performance of your
equipment and the safety of
your personnel are paramount.
Specify Alpha industrial cables
for demanding applications,
since the integrity of your
system is only as robust as the
products you use.
GLOBAL HEADQUARTERS
711 Lidgerwood Avenue
Elizabeth, NJ 07207-0711 USA
Toll Free: 1-800-52 ALPHA
Tel: 1-908-925-8000
Fax: 1-908-925-5411
E-mail: [email protected]
Superior availability
Alpha offers cables from
stock in most sizes and
constructions, in both small
and large put-ups, so you
can order it when you need
it. Our products are available
for same-day shipment,
eliminating long lead times.
EUROPE
Alpha Wire International
Saxon House
1 Downside | Sunbury-on-Thames
Middlesex | United Kingdom | TW16 6RT
Tel: +44-(0)-800-288-8809
Fax: +44-(0)-800-288-8810
E-mail: [email protected]
Service and support,
second-to-none
Selecting the correct cable
for your unique application
is essential to overall system
reliability, performance,
and safety. So we make it
easy for you select the right
Alpha cable for your specific
application. Our online
resources include a wire and
cable selection guide, technical
information, full product
catalog, and a distributor
locator to make it easy to
select and get the cable you
need. Can’t find what you’re
looking for? Design the cable
to your specification. It’s easy,
just visit www.alphawire.com!
ASIA PACIFIC
Alpha Wire
Silver Center | Room 1708
North Shanxi Road 1388
Shanghai | China | 200060
Tel: +86-21-61498201/61498205
Fax: +86-21-61498001
E-mail: [email protected]
©2012 Alpha Wire. All rights reserved.
Specifications subject to change. Consult Alpha Wire for latest specifications. ControlNet is a trademark of ControlNet International, Ltd. DeviceNet is trademark of Open DeviceNet Vendor Association, Inc. PROFIBUS is a trademark of Profibus International.
Lit. No. ACPIA-Bro-1207
Supersedes: ACPIA-Bro-1102