1600 Wall System™5 - Architectural Detail Manual

1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
FEATURES
Features
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
• 1600 Wall SystemTM5 is an inside glazed captured curtain wall
•
•
•
•
•
•
•
•
•
•
•
•
•
1600 Wall SystemTM5 has a 2-1/2" (63.5) sight line
Standard 6" (152.4) or 7-1/2" (190.5) system depths
Condensation water management capability
Integral perimeter caulk leg
Thermally improved
Snap-on covers
Optional split vertical mullion
Type "A" fabrication: Screw Spline or Shear Block
Type "B" fabrication: Punched openings
SSG Option
Two color option
PermanodicTM anodized finishes in seven choices
Painted finishes in standard and custom choices
•
•
•
•
•
Steel reinforcing available
Rain screen and backpans
Pressure plate option for outside glazing requirements
Integrates with concealed GLASSventTM for curtain wall
Integrates with VersoleilTM Sunshade Outrigger System and Horizontal or Vertical Single Blade Systems
• Profit$MakerTM plus die sets available
Product Applications
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Optional Features
• Ideal for low-rise to mid-rise curtain wall applications where inside glazing and high
performance is desired for ribbon windows and multi-lite punched openings in both
new and remodel construction projects
For specific product applications,
Consult your Kawneer representative.
kawneer.com
ADMD050
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 WALL SYSTEMTM5
BLANK PAGE
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
DECEMBER, 2013
EC 97911-053
1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
3
INDEX
PICTORIAL VIEW.............................................................................. 4-7
1/4 SIZE DETAILS........................................................................... 8-11
ENTRANCE DETAILS........................................................................ 12
CORNERS........................................................................................... 13
VENT OPTIONS.................................................................................. 14
MISCELLANEOUS............................................................................. 15
WIND LOAD CHARTS................................................................... 16-24
DEADLOAD CHARTS........................................................................ 25
THERMAL CHARTS...................................................................... 26-35
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,
WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE
SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS,
AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses
( ) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded
and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be
modified to expand design flexibility. Please contact your Kawneer representative for further assistance.
The following metric (SI ) units are found in these details:
m –meter
cm – centimeter
mm –millimeter
s –second
Pa –pascal
MPa –megapascal
Kawneer reserves the right to change configurations without prior notice when deemed necessary for product
improvement.
kawneer.com
ADMD050
VERTICAL MULLION
HEAD
GLASS STOP
THERMAL
ISOLATOR
GLASS STOP
SILL
COVER
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
PICTORIAL VIEW
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 WALL SYSTEMTM5
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
DECEMBER, 2013
EC 97911-053
TYPE "A" ASSEMBLY
Screw Spline for Ribbon Window
HORIZONTAL
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
kawneer.com
1600 WALL SYSTEMTM5
EC 97911-053
PICTORIAL VIEW
TYPE "B" ASSEMBLY
Punched Openings
HEAD
GLASS STOP
THERMAL
ISOLATOR
HORIZONTAL
GLASS STOP
COVER
VERTICAL
MULLION
SILL
ADMD050
5
VERTICAL MULLION
SHEAR BLOCK
HEAD
GLASS STOP
THERMAL
ISOLATOR
GLASS STOP
FLAT FILLER
SILL
COVER
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
PICTORIAL VIEW
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 WALL SYSTEMTM5
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
6
DECEMBER, 2013
EC 97911-053
TYPE "A" ASSEMBLY
Shear Block Assembly for Curtain Wall
HORIZONTAL
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
kawneer.com
1600 WALL SYSTEMTM5
EC 97911-053
PICTORIAL VIEW
TYPE "A" ASSEMBLY
Screw Spline with Split Mullion
for Curtain Wall
SPLIT MULLION
HEAD
GLASS STOP
THERMAL
ISOLATOR
HORIZONTAL
GLASS STOP
SILL
COVER
ADMD050
7
1
1A
5A
4
5
4A
5A
4
6A
3 3A
4A
6"(152.4)
6"(152.4)
7-1/2"(190.5)
7-1/2"(190.5)
1 1A
2 2A
ELEVATION IS NUMBER KEYED TO DETAILS
1
1A
2
2A
3
3A
5
5A
ADMD050
6
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0'
2-1/2"
(63.5)
6A
kawneer.com
© Kawneer Company, Inc., 2013
3A
6
2-1/2"
(63.5)
RIBBON WINDOW (TYPE "A" SCREW SPLINE)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
5
6"(152.4)
3
2-1/2"
(63.5)
1600 WALL SYSTEMTM5
7-1/2"(190.5)
4A
6"(152.4)
4
7-1/2"(190.5)
8
DECEMBER, 2013
EC 97911-053
NOTE:
Available in 6" (Shown Dotted in) and 7-1/2" depths.
Consult your Kawneer Representative for more information.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
4
4A
kawneer.com
5
3A
4
5
4A
5A
4
5A
4A
2-1/2"
(63.5)
2-1/2"
(63.5)
3
6"(152.4)
7-1/2"(190.5)
6"(152.4)
7-1/2"(190.5)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
DECEMBER, 2013
1600 WALL SYSTEMTM5
EC 97911-053
SCALE 3" = 1'-0"
1A
6"(152.4)
7-1/2"(190.5)
6A
1 1A
2 2A
3 3A
ELEVATION IS NUMBER KEYED TO DETAILS
5
ADMD050
1
1A
2
2A
3
3A
5A
6
9
RIBBON WINDOW (TYPE "B")
NOTE:
Available in 6" (Shown Dotted in) and 7-1/2" depths.
Consult your Kawneer Representative for more information.
MAX. UNIT WIDTH 24’-0”
1
6
6"(152.4)
7-1/2"(190.5)
2-1/2"
(63.5)
6A
6"(152.4)
6
6"(152.4)
7-1/2"(190.5)
1
7A
6A
8
2
8A
3
2
3
3
4
5
5
2-1/2"
(63.5)
7
7A
ADMD050
8
8A
kawneer.com
© Kawneer Company, Inc., 2013
2
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CURTAIN WALL (SHEAR BLOCK)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
6A
7
6"(152.4)
NOTE:
Available in 6" (Shown Dotted in) and 7-1/2" depths.
Consult your Kawneer Representative for more information.
2-1/2"
(63.5)
1600 WALL SYSTEMTM5
7-1/2"(190.5)
6
7-1/2"(190.5)
10
DECEMBER, 2013
EC 97911-053
SCALE 3" = 1'-0"
ELEVATION IS NUMBER KEYED TO DETAILS
4
6
kawneer.com
NOTE:
Available in 6" (Shown Dotted in) and 7-1/2" depths.
Consult your Kawneer Representative for more information.
7
6A
7A
2
6A
8
5
7
ADMD050
1
7A
2-1/2"
(63.5)
EC 97911-053
8
7-1/2"(190.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6
6"(152.4)
7-1/2"(190.5)
6"(152.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
DECEMBER, 2013
1600 WALL SYSTEMTM5
11
CURTAIN WALL (SCREW SPLINE)
SCALE 3" = 1'-0"
6"(152.4)
7-1/2"(190.5)
1
2
8A
3
2
3
3
4
ELEVATION IS NUMBER KEYED TO DETAILS
4
5
2-1/2"
(63.5)
8A
1600 WALL SYSTEMTM5
12
DECEMBER, 2013
ENTRANCE DETAILS (1" INFILL)
EC 97911-053
SCALE 3" = 1'-0"
3
4
1
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
B/H OR O/P
C/H
ELEVATION IS NUMBER KEYED TO DETAILS
3
BUTT HUNG OR
OFFSET PIVOT
1A
1-15/16"
TYP.
DOOR JAMB
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING
CONCEALED OVERHEAD CLOSER
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2
1 1A 1B
1B
DOOR JAMB
CENTER HUNG
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN CONCEALED
OVERHEAD CLOSER
OR SURFACE CLOSER
2
TRANSOM BAR
CENTER HUNG
CONCEALED OVERHEAD
OR FLOOR CLOSER
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
4
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
7/8"
(22.2)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
kawneer.com
1600 WALL SYSTEMTM5
EC 97911-053
CORNERS
SCALE 3" = 1'-0"
90° OUTSIDE CORNER
90° OUTSIDE CORNER
90° INSIDE CORNER
90° INSIDE CORNER
ADMD050
13
HEAD
SILL
JAMB
ADMD050
JAMB AT
SSG MULLION
NOTE: Other vent types can be accommodated. Contact your
Kawneer representative for other options
HEAD
SILL
JAMB
kawneer.com
© Kawneer Company, Inc., 2013
VENT OPTIONS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 WALL SYSTEMTM5
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
14
DECEMBER, 2013
EC 97911-053
SCALE 3" = 1'-0"
GLASSventTM FOR CUTAIN WALL
8225TL IsoLockTM WINDOW SHOWN
1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
15
MISCELLANEOUS
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded
and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be
modified to expand design flexibility. Please contact your Kawneer representative for further assistance.
kawneer.com
PRESSURE PLATE HORIZONTAL
FOR OUTSIDE GLAZING
PRESSURE PLATE VERTICAL
FOR OUTSIDE GLAZING
STEEL REINFORCING
BACKPAN HORIZONTAL
BACKPAN VERTICAL
BACKPAN SSG VERTICAL
ADMD050
16
1600 WALL SYSTEMTM5
DECEMBER, 2013
WIND LOAD / DEADLOAD CHARTS
EC 97911-053
DEADLOAD CHARTS
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an
intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4"
(6.35) thick glass supported on two setting blocks placed at the loading points shown.
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4"
above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress
and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa.). Charted
curves, in all cases are for the limiting value. If the design wind load is determined through the analytical procedures
of ASCE/SEI 7-10 or earlier editions, the load shall be based on the nominal loads used in allowable stress design. A
4/3 increase in allowable stress has not been used to develop these curves. For special situations not covered by these
curves, contact your Kawneer representative for additional information.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS
1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
WIND LOAD CHARTS (TYPE "B" SCREW SPLINE)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
TWIN SPAN
1
METERS
1.5
.5
2
16
13
4
A
4.5
12
9
3
E
2.5
8
7
6" (154.4)
10
2
6
5
1.5
4
3.5
11
10
3
9
A
8
2.5
B
7
E D
6
C
2
5
3-3/4" (95.3)
C
D
MULLION HEIGHT IN FEET
3.5
METERS
B
11
4
13
METERS
12
1.5
4
1
3
2
2
0.5
2
3
4
5
6
7
I = 8.085 (336.52 x 104)
S = 2.692 (44.11 x 103)
8
0.5
1
166036
1
1
3
1
166040
0
1
2
1
4
5
6
7
8
TWIN SPAN
METERS
.5
3
I = 3.115 (129.66 x 104)
S = 1.633 (26.76 x 103)
MULLION CENTERS IN FEET
SINGLE SPAN
METERS
1.5
.5
2
1
1.5
2
16
16
15
4
13
A
12
E
10
2.5
8
7
2
6
5
7-1/2" (190.5)
9
METERS
3
1.5
3.5
11
B
10
9
3
C
E D
2.5
8
7
2
6
5
1.5
4
4
1
3
2
2
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
kawneer.com
8
0.5
1
166013
0
1
3
0.5
1
I = 15.271 (635.63 x 104)
S = 4.139 (67.83 x 103)
166018
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD050
5-1/4" (133.4)
3.5
METERS
D
11
4
C
MULLION HEIGHT IN FEET
12
4.5
14
B
13
15
4.5
A
14
MULLION HEIGHT IN FEET
2
14
MULLION CENTERS IN FEET
© Kawneer Company, Inc., 2013
1.5
15
4.5
14
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
16
15
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
.5
17
8
I = 7.342 (305.60 x 104)
S = 2.759 (45.21 x 103)
1600 WALL SYSTEMTM5
DECEMBER, 2013
WIND LOAD CHARTS (TYPE "A" SCREW SPLINE)
EC 97911-053
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
1
METERS
1.5
.5
2
16
15
2
4.5
14
4
A
12
C
D
E
3
2.5
8
7
6" (154.4)
9
METERS
10
2
6
5
1.5
4
3.5
11
10
3
9
A
8
C
E D
7
2.5
B
2
6
5
3-3/4" (95.3)
3.5
B
11
4
13
METERS
12
MULLION HEIGHT IN FEET
13
1.5
4
1
3
2
2
0.5
1
2
3
4
5
6
7
I = 7.553 (314.38 x 10 )
S = 2.519 (41.28 x 103)
4
8
MULLION CENTERS IN FEET
0.5
1
165016 & 166033
0
1
3
1
165016 & 166039
0
1
2
1
4
5
6
7
I = 3.276 (136.36 x 104)
S = 1.739 (28.50 x 103)
8
SINGLE SPAN
METERS
.5
3
MULLION CENTERS IN FEET
SINGLE SPAN
METERS
1.5
.5
2
16
1
1.5
2
16
15
7
2
6
5
7-1/2" (190.5)
2.5
8
METERS
3
9
1.5
4
3.5
11
B
10
3
C
E D
9
2.5
8
7
2
6
5
1.5
4
1
3
2
2
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
0.5
1
166010 & 166011
0
1
3
0.5
1
I = 14.344 (597.04 x 10 )
S = 3.687 (60.42 x 103)
4
166010 & 166015
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD050
5-1/4" (133.4)
MULLION HEIGHT IN FEET
E
10
A
12
3.5
D
11
4
13
METERS
4
C
12
4.5
14
B
13
15
4.5
A
14
MULLION HEIGHT IN FEET
1.5
15
4.5
14
MULLION HEIGHT IN FEET
1
16
8
I = 7.571 (315.13 x 104)
S = 2.868 (47.00 x 103)
kawneer.com
© Kawneer Company, Inc., 2013
METERS
.5
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
18
1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
WIND LOAD CHARTS (SPLIT MULLION)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
TWIN SPAN
1
METERS
1.5
2
.5
16
2
9
28
A
8.5
27
12
A
D
E
C
2.5
8
7
2
6
5
1.5
MULLION HEIGHT IN FEET
9
METERS
3
MULLION HEIGHT
EQUAL
EQUAL
B
10
6" (154.4)
11
MULLION HEIGHT
3.5
4
26
7.5
24
23
7
22
E D
C
21
B
6.5
20
6
19
5.5
18
1
3
2
17
15
166080 & 166081
1
2
3
4
5
6
7
5
16
0.5
1
I = 8.172 (340.14 x 104)
S = 2.423 (39.71 x 103)
8
4.5
0
1
2
1
4
5
6
7
8
TWIN SPAN
METERS
.5
3
MULLION CENTERS IN FEET
SINGLE SPAN
METERS
1.5
.5
2
16
1
1.5
2
30
15
9
29
4.5
14
28
4
13
C
2.5
7
2
6
5
1.5
4
1
3
MULLION HEIGHT IN FEET
E D
B
MULLION HEIGHT
EQUAL
EQUAL
8
3-3/4" (95.3)
A
METERS
3
MULLION HEIGHT
11
9
8
26
3.5
10
8.5
27
12
MULLION HEIGHT IN FEET
8
26
25
7.5
24
23
22
6.5
21
20
6
19
B
18
E D
17
2
166084 & 166085
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
kawneer.com
8
5.5
C
5
16
0.5
1
7
A
I = 4.031 (167.78 x 104)
S = 2.063 (33.81 x 103)
ADMD050
15
4.5
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
METERS
13
4
METERS
14
MULLION CENTERS IN FEET
© Kawneer Company, Inc., 2013
1.5
29
4.5
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
30
15
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
.5
19
1600 WALL SYSTEMTM5
DECEMBER, 2013
WIND LOAD CHARTS (SPLIT MULLION)
EC 97911-053
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
TWIN SPAN
METERS
1.5
.5
2
1
1.5
2
30
9
29
4.5
A
28
14
4
13
8
7
2
6
5
1.5
MULLION HEIGHT IN FEET
2.5
MULLION HEIGHT
EQUAL
EQUAL
9
7-1/2" (190.5)
3
MULLION HEIGHT
10
C
METERS
D
E
8
26
3.5
11
8.5
27
B
12
MULLION HEIGHT IN FEET
A
26
7.5
24
B
C
E D
23
7
22
6.5
21
20
6
19
5.5
18
4
1
3
2
17
1
15
166082 & 166083
1
2
3
4
5
6
7
5
16
0.5
0
I = 15.977 (665.01 x 10 )
S = 3.696 (60.57 x 103)
8
4.5
0
4
MULLION CENTERS IN FEET
1
2
4
5
6
7
8
TWIN SPAN
METERS
1
3
MULLION CENTERS IN FEET
SINGLE SPAN
.5
METERS
15
METERS
1.5
.5
2
1
1.5
2
30
16
9
29
4.5
B
3.5
7
2
6
5
1.5
4
2
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
7.5
23
7
C
E D
22
6.5
21
20
6
19
5.5
5
16
166086 & 166087
1
B
24
17
0.5
1
26
18
1
3
MULLION HEIGHT IN FEET
2.5
8
MULLION HEIGHT
EQUAL
EQUAL
3
9
0
8
26
E D C
10
8.5
27
5-1/4" (133.4)
11
4
MULLION HEIGHT
12
A
METERS
13
MULLION HEIGHT IN FEET
A
28
14
METERS
15
I = 9.049 (376.65 x 104)
S = 3.331 (54.59 x 103)
ADMD050
15
4.5
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
kawneer.com
© Kawneer Company, Inc., 2013
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
.5
16
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
20
DECEMBER, 2013
1600 WALL SYSTEMTM5
EC 97911-053
WIND LOAD CHARTS (SHEAR BLOCK)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
TWIN SPAN
1
METERS
1.5
.5
2
1.5
2
9
29
4.5
28
14
4
13
2.5
8
7
2
6
5
1.5
MULLION HEIGHT IN FEET
C
D
E
METERS
9
3
6" (154.4)
B
MULLION HEIGHT
EQUAL
EQUAL
3.5
11
10
8
26
A
MULLION HEIGHT
12
8.5
27
A
26
7.5
24
B
23
7
C
22
D
21
6.5
E
20
6
19
5.5
18
4
1
3
2
17
1
15
166038
2
3
4
5
6
7
5
16
0.5
1
I = 7.606 (316.59 x 104)
S = 2.654 (43.49 x 103)
8
MULLION CENTERS IN FEET
4.5
0
1
2
4
5
6
7
8
TWIN SPAN
METERS
1
3
MULLION CENTERS IN FEET
SINGLE SPAN
.5
METERS
15
0
METERS
1.5
.5
2
1
1.5
2
30
16
9
29
4.5
28
14
4
13
8
26
9
A
8
2.5
B
7
E D
C
2
6
5
1.5
4
1
3
2
METERS
3
3-3/4" (95.3)
10
MULLION HEIGHT
11
MULLION HEIGHT
EQUAL
EQUAL
3.5
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
kawneer.com
8
7.5
24
23
7
22
6.5
21
A
20
6
19
5.5
B
17
5
16
166041
0
26
18
0.5
1
MULLION HEIGHT IN FEET
12
MULLION HEIGHT IN FEET
8.5
27
I = 2.973 (123.75 x 104)
S = 1.567 (25.68 x 103)
ADMD050
15
E D
0
1
2
3
4
4.5
C
5
6
7
MULLION CENTERS IN FEET
8
METERS
15
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
30
16
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
.5
21
1600 WALL SYSTEMTM5
DECEMBER, 2013
WIND LOAD CHARTS (SHEAR BLOCK)
EC 97911-053
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
TWIN SPAN
METERS
.5
1
METERS
1.5
.5
2
1
1.5
2
30
16
9
A
14
4
C
8
10
9
2.5
8
7
METERS
3
2
6
5
7-1/2" (190.5)
E
MULLION HEIGHT
EQUAL
EQUAL
3.5
1.5
MULLION HEIGHT IN FEET
26
D
11
8.5
27
MULLION HEIGHT
12
A
28
B
13
MULLION HEIGHT IN FEET
29
4.5
B
26
7.5
24
C
23
7
22
D
21
6.5
20
6
E
19
5.5
18
4
1
3
2
17
1
15
166005
1
2
3
4
5
6
7
5
16
0.5
0
METERS
15
I = 14.042 (584.47 x 10 )
S = 3.813 (62.48 x 103)
4
8
MULLION CENTERS IN FEET
4.5
0
1
2
3
4
5
6
7
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
22
8
MULLION CENTERS IN FEET
METERS
.5
1
1.5
2
30
9
29
28
8.5
27
23
7
A
22
6.5
21
B
20
6
C
19
18
5.5
D
17
E
16
5
15
4.5
0
1
2
3
4
5
7-1/2" (190.5)
7.5
24
METERS
MULLION HEIGHT IN FEET
26
MULLION HEIGHT
8
26
6
7
MULLION CENTERS IN FEET
8
166005 W/162301/302/303
Ia = 14.042 (584.47 x 104)
Sa = 3.813 (62.48 x 103)
Is = 9.347 (389.05 x 104)
Ss = 4.099 (67.17 x 103)
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SINGLE SPAN
DECEMBER, 2013
1600 WALL SYSTEMTM5
EC 97911-053
WIND LOAD CHARTS (SHEAR BLOCK)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
TWIN SPAN
1
METERS
1.5
.5
2
2
29
4.5
28
14
4
8
26
C
E D
9
3
2.5
8
7
METERS
10
2
6
5
1.5
4
MULLION HEIGHT
EQUAL
EQUAL
B
5-1/4" (133.4)
A
11
MULLION HEIGHT
3.5
2
166008
3
4
5
6
7
I = 6.639 (276.34 x 104)
S = 2.507 (41.08 x 103)
8
SINGLE SPAN
METERS
.5
1
1.5
2
30
9
29
28
8.5
27
7.5
23
7
22
6.5
21
20
6
19
METERS
24
5-1/4" (133.4)
26
MULLION HEIGHT
8
26
A
5.5
18
B
17
5
16
15
0
1
2
3
4
4.5
C
E D
5
6
7
MULLION CENTERS IN FEET
kawneer.com
8
23
7
B
22
6.5
21
20
6
19
E D
C
5.5
5
16
1
2
7.5
24
17
0.5
1
A
26
18
1
3
MULLION HEIGHT IN FEET
12
MULLION HEIGHT IN FEET
8.5
27
166008 W/162301/302/303
Ia = 6.639 (276.34 x 104)
Sa = 2.507 (41.08 x 103)
Is = 9.347 (389.05 x 104)
Ss = 4.099 (67.17 x 103)
ADMD050
15
4.5
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
METERS
13
MULLION CENTERS IN FEET
© Kawneer Company, Inc., 2013
1.5
9
15
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
30
16
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
.5
23
1600 WALL SYSTEMTM5
DECEMBER, 2013
WIND LOAD CHARTS (SHEAR BLOCK)
EC 97911-053
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
TWIN SPAN
METERS
.5
1
METERS
1.5
.5
2
1
1.5
2
30
16
9
29
4.5
28
14
A
9
2.5
8
7
2
6
5
1.5
4
2
3
4
5
6
7
23
7
22
6.5
21
C
E D
20
6
19
5.5
5
15
166017
2
7.5
16
1
1
B
24
17
0.5
0
26
18
1
3
MULLION HEIGHT IN FEET
3
C
E D
MULLION HEIGHT
EQUAL
EQUAL
10
3.5
5-1/4" (133.4)
11
8
26
B
METERS
MULLION HEIGHT IN FEET
12
8.5
A
27
MULLION HEIGHT
13
4
METERS
15
I = 8.292 (345.14 x 10 )
S = 3.046 (49.91 x 103)
4
8
MULLION CENTERS IN FEET
4.5
0
1
2
3
4
5
6
7
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
24
8
MULLION CENTERS IN FEET
METERS
.5
1
1.5
2
30
9
29
28
8.5
27
23
7
22
6.5
21
20
6
A
19
18
5.5
B
17
5
16
C
E D
15
0
1
2
3
4
5
5-1/4" (133.4)
7.5
24
METERS
MULLION HEIGHT IN FEET
26
MULLION HEIGHT
8
26
4.5
6
7
MULLION CENTERS IN FEET
8
166017 W/162301/302/303
Ia = 8.292 (345.14 x 104)
Sa = 3.046 (49.91 x 103)
Is = 9.347 (389.05 x 104)
Ss = 4.099 (67.17 x 103)
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SINGLE SPAN
1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
25
DEADLOAD CHARTS
6" (152.4)
6" (152.4)
166035
METERS
.5
1
METERS
1.5
.5
A = 1/4" Glass – 1/8 Point Loading
B = 1/4" Glass – 1/4 Point Loading
2
13
1
2
12
10
3.5
B = 1" Glass - 1/8 Point Loading
C = 1" Glass - 1/4 Point Loading
11
10
GLASS HEIGHT IN FEET
3
9
7
2
6
C B
A
5
METERS
2.5
8
1.5
4
1
3
2
3
9
2.5
8
7
2
6
5
C B
4
1.5
A
1
3
2
0.5
0.5
1
1
1
2
3
4
5
6
7
0
8
1
2
3
4
5
6
7
8
SPAN IN FEET
7-1/2" (190.5)
7-1/2" (190.5)
166007
166002
METERS
METERS
1
1.5
A = 1/4" Glass – 1/8 Point Loading
B = 1/4" Glass – 1/4 Point Loading
2
13
12
2
6
5
METERS
GLASS HEIGHT IN FEET
© Kawneer Company, Inc., 2013
2.5
7
1.5
4
1
3
2
2
3.5
11
10
9
8
1.5
12
3
A
C B
1
13
B = 1" Glass - 1/8 Point Loading
C = 1" Glass - 1/4 Point Loading
3.5
11
10
.5
GLASS HEIGHT IN FEET
.5
3
9
2.5
8
7
A
C B
6
2
5
1.5
4
1
3
2
0.5
0.5
1
1
0
1
2
3
4
5
6
7
0
8
SPAN IN FEET
1
2
3
4
5
SPAN IN FEET
ADMD050
6
7
8
METERS
0
kawneer.com
METERS
3.5
11
SPAN IN FEET
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1.5
13
12
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
166031
1600 WALL SYSTEMTM5
26
DECEMBER, 2013
THERMAL CHARTS
EC 97911-053
Project Specific U-factor
Example Calculation
(Based on single bay of Curtain Wall/Window Wall)
6'-0"
D.L.O.
SPANDREL
9'-0"
D.L.O.
VISION
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
5'-0"
D.L.O.
Vision Area
Example Glass U-factor
= 0.48 Btu/(ft2 · h · °F)
Vision Area
= 5(9 + 8 + 4) = 105.0 ft2
Total Area (Vision)
= 5' 2-1/2" (9' 3-3/4" + 8' 2-1/2" + 4' 2-1/2") = 113.2 ft2
Percentage of Vision Glass
= (Vision Area ÷ Total Area)100
= (105.0 ÷ 113.2)100 = 93%
Spandrel Area
Example Spandrel R-value
= 15 (ft2 · h · °F)/Btu
Spandrel Area
= 5(6 + 3) = 45.0 ft2
Total Area (Spandrel)
= 5' 2-1/2" (6' 2-1/2" + 3' 3-3/4") = 49.6 ft2
Percent of Spandrel
= (Spandrel Area ÷ Total Area)100
= (49.0 ÷ 49.6)100 = 91%
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
VISION
2-1/2" Typ.
3'-0"
D.L.O.
4'-0"
D.L.O.
VISION
31'-3"
SPANDREL
8'-0"
D.L.O.
2-1/2" Typ.
1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
27
THERMAL CHARTS
Vision Area Chart
System U-factor vs Percent of Vision Area
(N
0.70
E IGN
PL S
M E
A D
EX OR
F
T
O
COG
U-factor
0.53
0.50
0.40
0.30
)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.60
Btu
h·ft 2·°F
System U-factor
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.80
93%
0.20
95
85
90
75
80
70
Vision Area / Total Area (%)
Based on a single curtain wall bay of 93% vision glass and center
of glass U-factor of 0.48, System U-factor is equal to 0.53 Btu/(h·ft 2·°F)
System U-factor vs Percent of Spandrel Area
Spandrel
R-value
E IGN
PL S
M E
A D
EX OR
F
T
O
3.00
4.00
© Kawneer Company, Inc., 2013
5.00
0.30
0.21
0.20
0.10
91%
95
0.40
)
11.00
15.00
19.00
30.00
0.50
Btu
h·ft 2·°F
System U-factor
2.00
0.60
(N
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Spandrel Area Chart
90
85
80
75
70
Spandrel Area / Total Area (%)
Based on a single curtain wall bay of 91% spandrel and center of
spandrel R-value of 15, system U-factor is equal to 0.21 Btu/(h·ft 2·°F)
kawneer.com
ADMD050
System U-Factor for Vision Glass
ADMD050
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
THERMAL CHARTS (CAPTURED)
Vision Area / Total Area (%)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1600 WALL SYSTEMTM5
kawneer.com
© Kawneer Company, Inc., 2013
COG
U-factor
System U-Factor (Btu/h·ft2·°F)
28
DECEMBER, 2013
EC 97911-053
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-053
0.60
0.55
0.50
kawneer.com
Spandrel
R-Value
0.45
2.00
0.40
3.00
0.35
4.00
0.30
5.00
95
0.25
0.20
11.00
0.15
15.00
19.00
30.00
0.10
90
85
80
Spandrel Area / Total Area (%)
ADMD050
75
70
0.05
System U-Factor (Btu/h·ft2·°F)
DECEMBER, 2013
1600 WALL SYSTEMTM5
THERMAL CHARTS (CAPTURED)
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
System U-Factors for Spandrel Glass
0.75
0.70
0.65
29
Vision Area / Total Area (%)
COG
VT
System Visible Transmittance (VT) vs Percent of Vision Area
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
THERMAL CHARTS (CAPTURED)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 WALL SYSTEMTM5
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
COG
SHGC
System VT
30
DECEMBER, 2013
EC 97911-053
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
Charts are generated per AAMA 507.
© Kawneer Company, Inc., 2013
COG
U-factor
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor (Btu/h·ft2·°F)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
DECEMBER, 2013
1600 WALL SYSTEMTM5
EC 97911-053
THERMAL CHARTS (SSG)
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
System U-Factor for Vision Glass
Vision Area / Total Area (%)
ADMD050
31
THERMAL CHARTS (SSG)
System U-Factors for Spandrel Glass
0.70
0.65
0.60
0.50
Spandrel
R-Value
0.45
2.00
0.40
0.35
3.00
0.30
4.00
5.00
0.25
0.20
11.00
15.00
19.00
30.00
90
85
80
ADMD050
75
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 WALL SYSTEMTM5
kawneer.com
© Kawneer Company, Inc., 2013
95
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.55
System U-Factor (Btu/h·ft2·°F)
32
DECEMBER, 2013
EC 97911-053
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
0.15
0.10
70
0.05
Spandrel Area / Total Area (%)
System VT
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
COG
SHGC
kawneer.com
1600 WALL SYSTEMTM5
EC 97911-053
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD050
33
THERMAL CHARTS (SSG)
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
1600 WALL SYSTEMTM5
DECEMBER, 2013
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
EC 97911-053
Overall U-Factor 4
0.48
0.65
0.46
0.63
0.44
0.61
0.42
0.60
0.40
0.58
0.38
0.57
0.36
0.55
0.34
0.54
0.32
0.52
0.30
0.51
0.28
0.49
0.26
0.47
0.24
0.46
0.22
0.44
0.20
0.43
SHGC Matrix 2 (CAPTURED)
Visible Transmittance 2 (CAPTURED)
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.90
0.80
0.90
0.78
0.85
0.76
0.85
0.74
0.80
0.72
0.80
0.69
0.75
0.67
0.75
0.65
0.70
0.63
0.70
0.61
0.65
0.59
0.65
0.56
0.60
0.54
0.60
0.52
0.55
0.50
0.55
0.48
0.50
0.46
0.50
0.43
0.45
0.41
0.45
0.39
0.40
0.37
0.40
0.35
0.35
0.33
0.35
0.30
0.30
0.28
0.30
0.26
0.25
0.24
0.25
0.22
0.20
0.20
0.20
0.17
NOTE: For glass values that are not listed, linear interpolation is permitted.
1. U-Factors are determined in accordance with NFRC 100.
2. SHGC and VT values are determined in accordance with NFRC 200.
3. Glass properties are based on center of glass values and are obtained from your glass supplier.
4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of
2000mm wide by 2000mm high (78-3/4" by 78-3/4").
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
Glass U-Factor 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Thermal Transmittance1 (BTU/h • ft 2 • °F) (CAPTURED)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
34
1600 WALL SYSTEMTM5
DECEMBER, 2013
EC 97911-053
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
Glass U-Factor 3
Overall U-Factor 4
0.48
0.58
0.46
0.56
0.44
0.55
0.42
0.53
0.40
0.51
0.38
0.50
0.36
0.48
0.34
0.46
0.32
0.45
0.30
0.43
0.28
0.42
0.26
0.40
0.24
0.38
0.22
0.37
0.20
0.35
SHGC Matrix 2 (SSG)
Visible Transmittance 2 (SSG)
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.90
0.84
0.90
0.79
0.85
0.79
0.85
0.74
0.80
0.75
0.80
0.70
0.75
0.71
0.75
0.66
0.70
0.66
0.70
0.61
0.65
0.62
0.65
0.57
0.60
0.57
0.60
0.52
0.55
0.53
0.55
0.48
0.50
0.49
0.50
0.44
0.45
0.44
0.45
0.39
0.40
0.40
0.40
0.35
0.35
0.36
0.35
0.31
0.30
0.31
0.30
0.26
0.25
0.27
0.25
0.22
0.20
0.22
0.20
0.17
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Thermal Transmittance1 (BTU/h • ft 2 • °F) (SSG)
NOTE: For glass values that are not listed, linear interpolation is permitted.
1. U-Factors are determined in accordance with NFRC 100.
2. SHGC and VT values are determined in accordance with NFRC 200.
3. Glass properties are based on center of glass values and are obtained from your glass supplier.
4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of
2000mm wide by 2000mm high (78-3/4" by 78-3/4").
kawneer.com
ADMD050
35
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 WALL SYSTEMTM5
BLANK PAGE
ADMD050
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
36
DECEMBER, 2013
EC 97911-053
Similar pages