dsPIC33E USB Starter Kit and PIC24E USB Starter Kit Users Guide

dsPIC33E USB Starter Kit and
PIC24E USB Starter Kit
User’s Guide
© 2010-2011 Microchip Technology Inc.
DS51936B
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,
PIC32 logo, rfPIC and UNI/O are registered trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified
logo, MPLIB, MPLINK, mTouch, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance,
TSHARC, UniWinDriver, WiperLock and ZENA are
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2010-2011, Microchip Technology Incorporated, Printed in
the U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-61341-142-1
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS51936B-page 2
© 2010-2011 Microchip Technology Inc.
dsPIC33E/PIC24E USB
STARTER KIT USER’S GUIDE
Table of Contents
Chapter 1. Introduction
1.1 Starter Kit Contents ...................................................................................... 11
1.2 Starter Kit Functionality and Features .......................................................... 12
Chapter 2. Hardware
2.1 High-Level Block Diagram ............................................................................ 15
2.2 Features ....................................................................................................... 16
Appendix A. Board Layout and Schematics
A.1 Starter Kit Board Layout ............................................................................... 19
A.2 Application Hardware Schematics ............................................................... 21
A.3 Starter Kit Debugger Hardware Schematics ................................................ 26
© 2010-2011 Microchip Technology Inc.
DS51936B-page 3
dsPIC33E/PIC24E USB Starter Kit User’s Guide
NOTES:
DS51936B-page 4
© 2010-2011 Microchip Technology Inc.
dsPIC33E/PIC24E USB
STARTER KIT USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before you use the
dsPIC33E USB Starter Kit or the PIC24E USB Starter Kit. Items discussed in this
Preface include:
•
•
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
Warranty Registration
Recommended Reading
The Microchip Web Site
Development Systems Customer Change Notification Service
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes how to use one of the starter kits as a development tool to
emulate and debug firmware on a target board. The document layout is as follows:
• Chapter 1. “Introduction” – This chapter provides a brief overview of each
starter kit.
• Chapter 2. “Hardware” – This chapter provides the hardware descriptions for
each starter kit.
• Appendix A. “Board Layout and Schematics” – This appendix provides a block
diagram, board layouts, and detailed schematics of each starter kit.
© 2010-2011 Microchip Technology Inc.
DS51936B-page 5
dsPIC33E/PIC24E USB Starter Kit User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description
Arial font:
Italic characters
Represents
Examples
Referenced books
Emphasized text
A window
A dialog
A menu selection
A field name in a window or
dialog
A menu path
MPLAB® IDE User’s Guide
...is the only compiler...
the Output window
the Settings dialog
select Enable Programmer
“Save project before build”
A dialog button
A tab
A key on the keyboard
Click OK
Click the Power tab
Press <Enter>, <F1>
Italic Courier New
Sample source code
Filenames
File paths
Keywords
Command-line options
Bit values
Constants
A variable argument
Square brackets [ ]
Optional arguments
Curly brackets and pipe
character: { | }
Ellipses...
Choice of mutually exclusive
arguments; an OR selection
Replaces repeated text
#define START
autoexec.bat
c:\mcc18\h
_asm, _endasm, static
-Opa+, -Opa0, 1
0xFF, ‘A’
file.o, where file can be
any valid filename
mcc18 [options] file
[options]
errorlevel {0|1}
Initial caps
Quotes
Underlined, italic text with
right angle bracket
Bold characters
Text in angle brackets < >
Courier New font:
Plain Courier New
Represents code supplied by
user
DS51936B-page 6
File>Save
var_name [,
var_name...]
void main (void)
{ ...
}
© 2010-2011 Microchip Technology Inc.
Preface
WARRANTY REGISTRATION
Please complete the enclosed Warranty Registration Card and mail it promptly.
Sending in the Warranty Registration Card entitles you to receive new product updates.
Interim software releases are available at the Microchip web site.
RECOMMENDED READING
This user’s guide describes how to use the dsPIC33E USB Starter Kit or the PIC24E
USB Starter Kit. The following documents are available and recommended as
supplemental reference resources.
dsPIC33EPXXXMU806/810/814 and PIC24EPXXXGU810/814 Data Sheet
(DS70616)
Refer to this document for detailed information on dsPIC33E and PIC24E devices.
Reference information found in this data sheet includes:
•
•
•
•
Device memory maps
Device pinout and packaging details
Device electrical specifications
List of peripherals included on the devices
dsPIC33E/PIC24E Family Reference Manual Sections
Family Reference Manual sections are available, which explain the operation of the
dsPIC® DSC family architecture and peripheral modules. The specifics of each device
family are discussed in the individual family’s device data sheet.
dsPIC33E/PIC24E Flash Programming Specification (DS70619)
Refer to this document for information on instruction sets and firmware development.
This document may be obtained from the Microchip web site or your local sales office.
MPLAB® C Compiler for PIC24 MCUs and dsPIC® DSCs User’s Guide
(DS51284)
This document details the use of Microchip’s MPLAB C Compiler for PIC24 MCUs and
dsPIC DSC devices to develop an application. The MPLAB C Compiler is a
GNU-based language tool, based on source code from the Free Software Foundation
(FSF). For more information about the FSF, visit www.fsf.org.
MPLAB® IDE User’s Guide (DS51519)
This document describes how to use the MPLAB IDE Integrated Development Environment (IDE), as well as the MPLAB project manager, MPLAB editor and MPLAB SIM
simulator. Use these development tools to help you develop and debug application code.
Universal Serial Bus Specification and Associated Documents
The Universal Serial Bus is defined by the USB 2.0 Specification and its associated
supplements and class-specific documents. These documents are available from the USB
Implementers Forum. See their website at: http://www.usb.org.
© 2010-2011 Microchip Technology Inc.
DS51936B-page 7
dsPIC33E/PIC24E USB Starter Kit User’s Guide
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite Internet browser, the web site contains the following
information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchip’s customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool of
interest.
To register, access the Microchip web site at www.microchip.com, click on Customer
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
• Compilers – The latest information on Microchip C compilers and other language
tools. These include the MPLAB C compiler; MPASM™ and MPLAB 16-bit
assemblers; MPLINK™ and MPLAB 16-bit object linkers; and MPLIB™ and
MPLAB 16-bit object librarians.
• Emulators – The latest information on the Microchip MPLAB REAL ICE in-circuit
emulator.
• In-Circuit Debuggers – The latest information on the Microchip in-circuit
debugger, MPLAB ICD 3.
• MPLAB® IDE – The latest information on Microchip MPLAB IDE, the Windows®
Integrated Development Environment for development systems tools. This list is
focused on the MPLAB IDE, MPLAB SIM simulator, MPLAB IDE Project Manager
and general editing and debugging features.
• Programmers – The latest information on Microchip programmers. These include
the MPLAB PM3 device programmer and the PICkit™ 3 development
programmers.
DS51936B-page 8
© 2010-2011 Microchip Technology Inc.
Preface
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at:
http://www.microchip.com/support
DOCUMENT REVISION HISTORY
Revision A (November 2010)
This is the initial released version of this document.
Revision B (May 2011)
This revision includes the following updates:
• Replaced OTG with the word “device” in the last bullet item in 1.1 “Starter Kit
Contents”
• Removed item 10 from 1.2.1 “Top Assembly” and Figure 1-1
• Removed micro-A and USB OTG from item 3 in 1.2.2 “Bottom Assembly”
• Removed USB OTG and micro-A from Figure 2-1 in 2.1 “High-Level Block
Diagram”
• Updated the second item in the bulleted list in 2.2.2 “Power Supply”
• Removed OTG mode from the bulleted list and the corresponding paragraph in
2.2.4 “dsPIC33E/PIC24E USB Connectivity”
• Replaced OTG with DEVICE in the Power Distribution/Switching schematic
(Figure A-4) and added “Do not populate” in the USB Connections schematic
(Figure A-8) in A.2 “Application Hardware Schematics”
© 2010-2011 Microchip Technology Inc.
DS51936B-page 9
dsPIC33E/PIC24E USB Starter Kit User’s Guide
NOTES:
DS51936B-page 10
© 2010-2011 Microchip Technology Inc.
dsPIC33E/PIC24E USB
STARTER KIT USER’S GUIDE
Chapter 1. Introduction
Thank you for purchasing a Microchip Technology dsPIC33E USB Starter Kit or PIC24E
USB Starter Kit. Depending on the starter kit purchased, the board included provides a
low-cost, modular development system for Microchip’s enhanced 16-bit Digital Signal
Controllers (DSCs) or High-Performance Microcontrollers (MCUs).
The starter kit comes preloaded with demonstration software for the user to explore the
new features of the dsPIC33E DSC family (dsPIC33E USB Starter Kit) or the PIC24E
MCU family (PIC24E USB Starter Kit). It is also expandable through a modular
expansion interface, which allows the user to extend its functionality. The starter kit also
supplies on-board circuitry for full debug and programming capabilities.
This chapter covers the following topics:
• Starter Kit Contents
• Starter Kit Functionality and Features
The software for the demo application that is preprogrammed into the dsPIC33E or
PIC24E device is available via download from the Microchip web site at: http://www.
microchip.com. All project files have been included so that the code may be used
directly to restore the dsPIC33E or PIC24E device on the starter kit to its original state
(i.e., if the sample device has been reprogrammed with another program) or so you can
use the demonstration code as a platform for further experimentation and evaluation.
Note:
1.1
Refer to the Readme file provided with the starter kit demonstration software for instructions on how to run the demonstration application. Refer to
the information sheet that is provided with the starter kit package for
additional resources and instructions on how to use the starter kit for
programming and debugging application software.
STARTER KIT CONTENTS
The starter kit contains the following items:
•
•
•
•
dsPIC33E or PIC24E USB Starter Kit Development Board
dsPIC33E or PIC24E USB Starter Kit Information Sheet
USB mini-B to full-sized A cable - USB debug cable to debug and power the board
USB micro-B to full-sized A cable - USB cable to communicate with the
dsPIC33E/PIC24E USB device port
Note:
If you are missing any part of a kit, contact a Microchip sales office for
assistance. A list of worldwide Microchip offices for sales and service is
provided on the back page of this document.
© 2010-2011 Microchip Technology Inc.
DS51936B-page 11
dsPIC33E/PIC24E USB Starter Kit User’s Guide
1.2
STARTER KIT FUNCTIONALITY AND FEATURES
This section describes the top and bottom board layout assembly of the dsPIC33E or
PIC24E USB Starter Kit.
1.2.1
Top Assembly
The top assembly of the board includes these key features, as indicated in Figure 1-1:
1. dsPIC33EP512MU810 16-bit DSC device (dsPIC33E USB Starter Kit) or
PIC24EP512GU810 16-bit MCU (PIC24E USB Starter Kit).
2. Green power indicator LED (D4).
3. 8 MHz crystal (Y3) for precision microcontroller clocking.
4. USB connectivity for on-board debugger communications (J2).
5. Three push button switches (SW1, SW2, SW3) for user-defined inputs.
6. Three user-defined indicator LEDs (LED1, LED2, LED3).
7. USB Type A receptacle (J6) connectivity for dsPIC33E/PIC24E USB host-based
applications.
8. HOST mode power jumper (J5).
9. Regulated +3.3V power supply for powering the starter kit via USB or an
expansion board.
Note:
FIGURE 1-1:
When running USB device applications, open the jumper J5 to prevent
possibly back-feeding voltage onto the VBUS from one port on the host to
another (or from one host to another).
STARTER KIT LAYOUT (TOP SIDE)
2
4
9
5
1
8
3
DS51936B-page 12
5
6
5
7
6
6
© 2010-2011 Microchip Technology Inc.
Introduction
1.2.2
Bottom Assembly
The bottom assembly of the board includes these key features, as indicated in
Figure 1-2:
1. PIC24FJ256GB106 USB microcontroller (U1) for on-board debugging.
2. Connector (J3) for various expansion boards such as the Multimedia Expansion
Board (MEB) or the I/O Expansion Board.
3. USB Type micro-B receptacle (J4) for USB Device connectivity for dsPIC33E/
PIC24E USB device-based applications.
Note:
FIGURE 1-2:
Refer to Appendix A. “Board Layout and Schematics” for details on the
mapping of device pins to the pins on the expansion connector.
STARTER KIT LAYOUT (BOTTOM SIDE)
1
2
3
© 2010-2011 Microchip Technology Inc.
DS51936B-page 13
dsPIC33E/PIC24E USB Starter Kit User’s Guide
NOTES:
DS51936B-page 14
© 2010-2011 Microchip Technology Inc.
dsPIC33E/PIC24E USB
STARTER KIT USER’S GUIDE
Chapter 2. Hardware
This chapter describes the hardware features of the starter kit. Topics covered include:
• High-Level Block Diagram
• Features
2.1
HIGH-LEVEL BLOCK DIAGRAM
Figure 2-1 illustrates a high-level block diagram of the dsPIC33E/PIC24E USB starter
kit.
FIGURE 2-1:
HIGH-LEVEL BLOCK DIAGRAM
VUSB or +5V_EXT
USB Device
(Type micro-B)
+3.3V
Power
Supply
USB Host
Power Supply
Debugger
(PIC24FJ256GB106)
+5V_EXT
ICSP™
dsPIC33EP512MU810
(dsPIC33E USB Starter Kit)
or
PIC24EP512GU810
(PIC24E USB Starter Kit)
Application Board Connector
USB Device
(Type mini-B)
USB Host
(Type A)
Switches
LEDs
© 2010-2011 Microchip Technology Inc.
DS51936B-page 15
dsPIC33E/PIC24E USB Starter Kit User’s Guide
2.2
FEATURES
This section describes the key features of the starter kit. Refer to Figure 1-1 and
Figure 1-2 in Chapter 1. “Introduction” for their actual locations on the board.
2.2.1
Processor Support
The dsPIC33E USB Starter Kit is designed with a permanently mounted (i.e., soldered)
dsPIC33EP512MU810 DSC. Similarly, the PIC24E USB Starter Kit is designed with a
permanently mounted (i.e., soldered) PIC24EP512GU810 MCU.
2.2.2
Power Supply
There are two ways to supply power to the dsPIC33E or PIC24E USB Starter Kit:
• Connect the USB Debug connector J2 to a PC running MPLAB using the supplied
mini-B to full-sized A cable
• An external application board with a regulated DC power supply that provides +5V
can be connected to the application board connector (J3) that is provided on the
bottom side of the board
One green LED (D4) is provided to show that the dsPIC33E or PIC24E device is being
powered.
2.2.3
Debug USB Connectivity
The dsPIC33E or PIC24E USB Starter Kit includes a PIC24FJ256GB106 USB microcontroller that provides debugger connectivity over USB. The PIC24FJ256GB106 is
hard-wired to the dsPIC33E or PIC24E device to translate the I/O pins of the
PIC24FJ256GB106 device to the ICSP™ pins of the dsPIC33E or PIC24E device. The
debugger circuit also includes a 25LC256 Serial EEPROM device for data storage.
The programming/debugging circuit on the dsPIC33E or PIC24E USB Starter Kit is similar
in functionality and feature-set to the MPLAB PICkit™ 3 debugger.
2.2.4
dsPIC33E/PIC24E USB Connectivity
There are three possible ways to connect to the dsPIC33E or PIC24E USB
microcontroller:
• Host mode
Connect the device to the type-A connector J6, located on the top side of the
starter kit. If using the debug USB port to power the Host port, install jumper J5 to
short the back-power prevention diode. Note that a maximum of ~400 mA can be
supplied from the debug USB port to the host port using this method. If the full
500 mA supply is needed for the application, an external supply must be
connected to the application board and jumper J5 must be removed to prevent
back-powering the debug USB port.
• Device mode
First, connect the debug mini-B USB cable to port J2. Next, connect the starter kit
to the USB Host using a cable with a type-B micro plug to the starter kit’s micro-B
port J4, located on the bottom side of the starter kit. The other end of the cable
must have a type-A plug. Connect it to a USB host. Jumper J5 should be
removed.
DS51936B-page 16
© 2010-2011 Microchip Technology Inc.
Hardware
2.2.5
Switches
Push button switches (SW1, SW2 and SW3) provide the following functionality:
• SW1: Active-low switch connected to RD6
• SW2: Active-low switch connected to RD7
• SW3: Active-low switch connected to RD13
The switches do not have any debounce circuitry and require the use of software
debounce techniques. When idle, the switches are pulled high (+3.3V). When pressed,
they are grounded.
2.2.6
LEDs
The LEDs (LED1, LED2 and LED3) are connected to PORT D of the processor:
• LED1: Active-high LED connected to RD0
• LED2: Active-high LED connected to RD1
• LED3: Active-high LED connected to RD2
The corresponding PORT D pins must be configured as digital outputs and set high in
order to turn on the LEDs.
2.2.7
Oscillator Options
The installed DSC or MCU has an 8 MHz crystal (Y3) connected to it. This crystal is
used by the microcontroller’s Primary Oscillator. Use of the external crystal is required
in order to develop USB applications, as the USB specification dictates a frequency tolerance of ± 0.25% for full speed. Non-USB applications can use the internal oscillators
if preferred. The starter kit also has provisions for an external Secondary Oscillator
(Y2); however, the crystal for this oscillator is not populated.
The PIC24FJ256GB106 device is independently clocked and has its own 12 MHz
crystal (Y1).
2.2.8
120-pin Modular Expansion Connector
The dsPIC33E or PIC24E USB Starter Kit includes a 120-pin modular expansion
interface (Application Board Connector J3) on its bottom side. This allows the board to
be optionally used in conjunction with other Microchip development boards such as the
I/O Expansion Board or the Multimedia Expansion Board (MEB), thereby extending the
functionality provided by the starter kit.
TABLE 2-1:
STARTER KIT CONNECTOR PART NUMBERS
Connector
HIROSE Electric P/N
Starter Kit Connector
FX10A-120P/12-SV1(71)
Application Board Connector
FX10A-120S/12-SV(71)
© 2010-2011 Microchip Technology Inc.
DS51936B-page 17
dsPIC33E/PIC24E USB Starter Kit User’s Guide
NOTES:
DS51936B-page 18
© 2010-2011 Microchip Technology Inc.
dsPIC33E/PIC24E USB
STARTER KIT USER’S GUIDE
Appendix A. Board Layout and Schematics
This appendix provides board layout diagrams and schematics of the dsPIC33E and
PIC24E USB Starter Kits and includes the following sections:
• Starter Kit Board Layout
• Application Hardware Schematics
• Starter Kit Debugger Hardware Schematics
A.1
STARTER KIT BOARD LAYOUT
FIGURE A-1:
STARTER KIT BOARD LAYOUT (TOP)
© 2010-2011 Microchip Technology Inc.
DS51936B-page 19
dsPIC33E/PIC24E USB Starter Kit User’s Guide
FIGURE A-2:
DS51936B-page 20
STARTER KIT BOARD LAYOUT (BOTTOM)
© 2010-2011 Microchip Technology Inc.
Board Layout and Schematics
A.2
APPLICATION HARDWARE SCHEMATICS
FIGURE A-3:
TARGET DEVICE (dsPIC33E/PIC24E)
U5
1
2
3
4
5
6
7
8
9
R34
4.7K
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
RG15
PWML3/PMPD4/RE4
VDD
PWMH2/PMPD3/RE3
PWMH3/PMPD5/RE5
PWML2/PMPD2/RE2
PWML4/PMPD6/RE6
RG13
PWMH4/PMPD7/RE7
RG12
PWML5/RC1
RG14
PWMH5/RC2
PWMH1/PMPD1/RE1
PWML6/RC3
PWML1/PMPD0/RE0
PWMH6/RC4
RPIA7
C1IND/PMPA5/RG6
RPIA6
C1INC/PMPA4/RG7
RG0
C2IND/PMPA3/RG8
RG1
MCLR
RF1
C2INC/PMPA2/RG9
RF0
VSS
VDD
VDD
VDDCAP
TMS/RA0
C3INA/RD7
RE8
C3INB/RD6
RE9
PMPRD/RD5
C1INA/VBUSST/RB5
PMPWR/RD4
C1INB/USBOE/RB4
RD13
C2INA/RB3
RD12
C2INB/RB2
PMPBE/RD3
PGEC3/RB1
RD2
PGED3/RB0
VCPCON/RD1
PGEC2/RB6
VSS
PGED2/RB7
PGEC1/SOSCO/RC14
VREF-/RA9
PGED1/SOSCI/RC13
VREF+/RA10
INT0/RD0
AVDD
PMPCS1/RD11
AVSS
ASCL1/PMPCS2/RD10
PMPA6/RB8
ASDA1/RD9
PMPA7/RB9
RTCC/RD8
CVREF/PMPA13/RB10
RA15
PMPA12/RB11
RA14
VSS
VSS
VDD
OSCO/RC15
TCK/RA1
OSCIN/RC12
RF13
VDD
RF12
TDO/RPIA5
PMPA11//RB12
TDI/RPIA4
PMPA10/RB13
ASDA2/RA3
PMPA1/RB14
ASCL2/RA2
PMPA0/RB15
D+/RG2
VSS
D-/RG3
VDD
VUSB
RD14
VBUS
RD15
NC
SDA2/PMPA9/RF4
RF2
SCL2/PMPA8/RF5
USBID/RF3
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
C14
83
10uF
82
81
80
79
78
77
76
75
74
73
R35
C15
0R
11pF
72
71
70
69
C16
68
67
11pF
66
65
C17
64
63
20pF
62
61
R36
1M
60
59
Y3
8 Mhz
C18
58
57
20pF
56
55
54
53
52
51
dsPIC33E/24E
C19
C20
C21
C22
C23
C24
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
© 2010-2011 Microchip Technology Inc.
DS51936B-page 21
POWER DISTRIBUTION/SWITCHING
D1
J2
R28
D2
+3.3V
U3
D3
MBR0520L
D4
C10
2.2uF
R33
0R
GND1
MCP1727
R30
200k
C13
C11
C12
0.1uF
2.2uF 0.01uF
R29
2.2k
GREEN
R31
330
R32
100K
U4 100K
1 IN
OUT 5
2 GND
3 ON FLAGB 4
FPF2104
400mA Limit
© 2010-2011 Microchip Technology Inc.
dsPIC33E/PIC24E USB Starter Kit User’s Guide
DS51936B-page 22
FIGURE A-4:
Board Layout and Schematics
FIGURE A-5:
USER LEDs
R42
D5
330R
RED
R44
D6
330R
YELLOW
R46
D7
330R
FIGURE A-6:
© 2010-2011 Microchip Technology Inc.
GREEN
USER SWITCHES
R39
R40
R41
10K
10K
10K
DS51936B-page 23
dsPIC33E/PIC24E USB Starter Kit User’s Guide
FIGURE A-7:
DS51936B-page 24
STARTER KIT INTERFACE
© 2010-2011 Microchip Technology Inc.
© 2010-2011 Microchip Technology Inc.
FIGURE A-8:
USB CONNECTIONS
U6
1
2
3
R38
100K
IN
OUT
GND
ON FLAGB
4
FPF2100
200mA Limit
(Do not populate)
R37
100K
2
1
2
3
R45
100K
IN
OUT
J6
5
GND
ON FLAGB
4
FPF2100
R43
200mA Limit
100K
C25
100uF
DS51936B-page 25
Board Layout and Schematics
U7
J5
1
J4
5
dsPIC33E/PIC24E USB Starter Kit User’s Guide
A.3
STARTER KIT DEBUGGER HARDWARE SCHEMATICS
FIGURE A-9:
MINI-ICSP INTERFACE
+3.3V
R3
10k
FIGURE A-10:
J1
SERIAL EEPROM
+3.3V
R11
10k
U2
5
6
1
3
7
R18
2.2k
DS51936B-page 26
8
VCC
SI
SO 2
SCK
CS
WP
HOLD
VSS
4
C6
1uF
© 2010-2011 Microchip Technology Inc.
Board Layout and Schematics
FIGURE A-11:
TARGET ICSP SIGNALS
R1
330
R4
R2
4.7k
330
R5
330
R13
3.92k
R10
10k
R16
2.21k
R17
2.21k
R6
4.7k
R9
100k
Q1
MMBT3906
R14
10k
Q2
MMBT3904
R20
10k
R19
100
R21
DNP
Q3
MMBT3904
R24
10k
© 2010-2011 Microchip Technology Inc.
R26
DNP
DS51936B-page 27
PIC24FJ256GB106 DEBUGGER HOST
+3.3V
C2
C3
+3.3V
C1
C4
10uF
0.1uF 0.1uF 0.1uF
R7
200k
+3.3V
R8
10k
R12
10k
+3.3V
U1
R15
C5
8pF
PIC24FJ256GB106
330
Y1
12MHz
+3.3V
+3.3V
+3.3V
© 2010-2011 Microchip Technology Inc.
R23
1K
R22
100
R25
3.16K
+3.3V
R27
10k
C8
C9
1uF
0.1uF
+3.3V
C7 8pF
dsPIC33E/PIC24E USB Starter Kit User’s Guide
DS51936B-page 28
FIGURE A-12:
NOTES:
© 2010-2011 Microchip Technology Inc.
DS51936B-page 29
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
China - Hangzhou
Tel: 86-571-2819-3180
Fax: 86-571-2819-3189
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Taiwan - Hsin Chu
Tel: 886-3-6578-300
Fax: 886-3-6578-370
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Fax: 886-7-330-9305
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
DS51936B-page 30
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
05/02/11
© 2010-2011 Microchip Technology Inc.
Similar pages