2250 IG System - Architectural Detail Manual

2250 IG
DECEMBER, 2013
FEATURES
Features
•
•
•
•
•
•
Economical
High performance Ribbon Window/Curtain Wall system
Narrow 2-1/4" sight line
4-1/2", 6" and 7-1/2" system depths for 1" infill
5-1/4" and 6-3/4 system depths for 1/4" infill
Inside glazed
•
•
•
•
Incidental water management capability
Integral perimeter caulk leg
Thermally improved
Snap-on covers
• Two color option
• PermanodicTM anodized finishes in seven choices
•
•
•
•
Painted finishes in standard and custom choices
Type “A” fabrication: Screw Splice or Shear Block
Type “B” fabrication: Punched openings
SSG Option
Optional Features
•
•
•
•
•
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-053
Steel reinforcing available
Rain screen and backpans
Pressure plate option for outside glazing requirements
Integrates with concealed GLASSventTM for curtain wall
Profit$Maker™ plus die sets available.
Product Applications
• Ideal for low to high-rise applications
For specific product applications,
Consult your Kawneer representative.
kawneer.com
ADMD150
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2250 IG
BLANK PAGE
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
DECEMBER, 2013
EC 97911-053
2250 IG
DECEMBER, 2013
EC 97911-053
3
INDEX
PICTORIAL VIEW............................................................................. 5-7
DETAILS - 1" INFILL...................................................................... 8-10
ENTRANCE DETAILS - 1" INFILL.................................................... 11
CORNERS - 1" INFILL...................................................................... 12
GLASSventTM FOR CURTAIN WALL - 1" INFILL............................. 13
MISCELLANEOUS DETAILS - 1" INFILL ........................................ 14
DETAILS - 1/4" INFILL................................................................. 15-17
ENTRANCE DETAILS - 1/4" INFILL................................................. 18
CORNERS - 1/4" INFILL................................................................... 19
GLASSventTM FOR CURTAIN WALL - 1/4" INFILL.......................... 20
MISCELLANEOUS DETAILS - 1/4" INFILL ..................................... 21
WIND LOAD CHARTS.................................................................. 22-33
DEADLOAD CHARTS.................................................................. 34-37
THERMAL CHARTS .................................................................... 38-45
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL
THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses
( ) are millimeters unless otherwise noted.
The following metric (SI ) units are found in these details:
m –meter
cm – centimeter
mm –millimeter
s –second
Pa –pascal
MPa –megapascal
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded
and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be
modified to expand design flexibility. Please contact your Kawneer representative for further assistance.
Kawneer reserves the right to change configurations without prior notice when deemed necessary for product
improvement.
kawneer.com
ADMD150
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2250 IG
BLANK PAGE
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
DECEMBER, 2013
EC 97911-053
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
kawneer.com
2250 IG
EC 97911-053
PICTORIAL VIEW
TYPE “A” ASSEMBLY
Screw Spline for Ribbon Windows
VERTICAL MULLION
HEAD
THERMAL
ISOLATOR
COVER
ADMD150
GLASS STOP
HORIZONTAL
GLASS STOP
SILL
5
HEAD
THERMAL
ISOLATOR
GLASS STOP
SILL
COVER
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
PICTORIAL VIEW
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2250 IG
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
6
DECEMBER, 2013
EC 97911-053
TYPE “B” ASSEMBLY
Screw Spline for Ribbon Windows
GLASS STOP
HORIZONTAL
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
kawneer.com
2250 IG
EC 97911-053
PICTORIAL VIEW
SHEAR BLOCK ASSEMBLY
Shear Block for Curtain Wall
VERTICAL MULLION
SHEAR BLOCK
HEAD
THERMAL
ISOLATOR
COVER
ADMD150
GLASS STOP
HORIZONTAL
GLASS STOP
FLAT FILLER
SILL
7
4A
1A
4
5
4A
5A
4
6
3A
5A
6A
1 1A
2 2A
ELEVATION IS NUMBER KEYED TO DETAILS
3 3A
4A
6" (152.4)
6" (152.4)
1
1A
2
2A
3
3A
2-1/4"
(57.2)
2-1/4"
(57.2)
5
5A
ADMD150
6
6A
kawneer.com
© Kawneer Company, Inc., 2013
RIBBON WINDOW (TYPE "A" SCREW SPLINE - 1" INFILL)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2250 IG
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
3
5
6" (152.4)
4
2-1/4"
(57.2)
SCALE 3" = 1'-0"
6" (152.4)
6" (152.4)
2-1/4"
(57.2)
8
DECEMBER, 2013
EC 97911-053
NOTE:
Available in 4-1/2", 6" (Shown) and 7-1/2" depths.
Consult you Kawneer Representative for more information.
1
4
4A
1A
4
5
4A
5A
4
kawneer.com
2-1/4"
(57.2)
3
5
6
5A
6A
4A
2-1/4"
(57.2)
SCALE 3" = 1'-0"
ELEVATION IS NUMBER KEYED TO DETAILS
2-1/4"
(57.2)
2-1/4"
(57.2)
5
5A
ADMD150
6" (152.4)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-053
6" (152.4)
6" (152.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
DECEMBER, 2013
2250 IG
1 1A
2 2A
3 3A
6" (152.4)
6" (152.4)
1
1A
2
2A
3
3A
6
9
RIBBON WINDOW (TYPE "B" SCREW SPLINE - 1" INFILL)
NOTE:
Available in 4-1/2", 6" (Shown) and 7-1/2" depths.
Consult you Kawneer Representative for more information.
1
3A
6A
6A
6
8
3
7A
8A
4
3
2
2A
5
5A
NOTE:
Available in 4-1/2", 6" (Shown) and 7-1/2" depths.
Consult you Kawneer Representative for more
information.
6A
6" (152.4)
6" (152.4)
1
1A
4
2
2A
ELEVATION IS NUMBER KEYED TO DETAILS
3
4
5
ADMD150
5A
2-1/4"
(57.2)
2-1/4"
(57.2)
7
7A
8
8A
kawneer.com
© Kawneer Company, Inc., 2013
CURTAIN WALL (SHEAR BLOCK - 1" INFILL)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
2-1/4"
(57.2)
2250 IG
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
7
6" (152.4)
6
6" (152.4)
6" (152.4)
2-1/4"
(57.2)
10
DECEMBER, 2013
EC 97911-053
SCALE 3" = 1'-0"
1A
2250 IG
DECEMBER, 2013
EC 97911-053
11
ENTRANCE DETAILS (1" INFILL)
SCALE 3" = 1'-0"
2
1 1A 1B
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
3
TRANSOM BAR
4
B/H OR O/P
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
C/H
ELEVATION IS NUMBER KEYED TO DETAILS
1A
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING
CONCEALED OVERHEAD CLOSER
3
1B
DOOR JAMB
1-7/8"
(47.6)
BUTT HUNG OR
OFFSET PIVOT
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
7/8"
(22.2)
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN CONCEALED
OVERHEAD CLOSER
OR SURFACE CLOSER
2
TRANSOM BAR
4
CENTER HUNG
CONCEALED OVERHEAD
OR FLOOR CLOSER
DOOR JAMB
CENTER HUNG
kawneer.com
ADMD150
90° OUTSIDE CORNER
SCREW SPLINE
90° OUTSIDE CORNER
SHEAR BLOCK
90° INSIDE CORNER
SCREW SPLINE
90° INSIDE CORNER
SHEAR BLOCK
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
CORNERS (1" INFILL)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2250 IG
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
12
DECEMBER, 2013
EC 97911-053
SCALE 3" = 1'-0"
2250 IG
DECEMBER, 2013
EC 97911-053
GLASSventTM FOR CURTAIN WALL (1" INFILL)
SCALE 3" = 1'-0"
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
HEAD
1
3
2
ELEVATION IS NUMBER KEYED TO DETAILS
2
SILL
JAMB AT
SSG MULLION
3
JAMB
LOCKING
HARDWARE
HINGE AND SUPPORT
HARDWARE
DESCRIPTION
OUTSWING CASEMENT/PROJECT OUT
CAM HANDLES
STANDARD
A.C./CUSTODIAL/SPANNER LOCK
(REMOVABLE KEY HANDLES)
OPTIONAL
4 BAR HINGES
STANDARD
SCREWS
STANDARD
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
HARDWARE SELECTION GUIDE
CAM HANDLES
kawneer.com
SPANNER
LOCK
4 BAR HINGE
ADMD150
SCREEN
WITH STANDARD WICKET
SCREEN
WITH FULL WICKET
13
MISCELLANEOUS (1" INFILL)
PRESSURE PLATE HORIZONTAL
FOR OUTSIDE GLAZING
STEEL REINFORCING
OPTIONAL STEEL
REINFORCING
AS REQUIRED
ADMD150
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2250 IG
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
14
DECEMBER, 2013
EC 97911-053
SCALE 3" = 1'-0"
2-1/4"
(57.2)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-053
4
4A 3
4
4
kawneer.com
1
5
4A
4
5
6
5
6
ELEVATION IS NUMBER KEYED TO DETAILS
4A
5
ADMD150
5-1/4" (133.4)
5-1/4" (133.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
DECEMBER, 2013
2250 IG
2-1/4"
(57.2)
6
15
RIBBON WINDOW (TYPE "A" SCREW SPLINE - 1/4" INFILL)
SCALE 3" = 1'-0"
NOTE:
Available in 5-1/4" (Shown) and 6-3/4" depths.
Consult you Kawneer Representative for more information.
1
4A 3
5-1/4" (133.4)
1
1
2
3
2
3
4
1
4
4
4A
4
1
5
5
6
4A 3
5
6
5-1/4" (133.4)
1
1
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
3
2-1/4"
(57.2)
4A
5
ADMD150
6
kawneer.com
© Kawneer Company, Inc., 2013
4A 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
RIBBON WINDOW (TYPE "B" SCREW SPLINE - 1/4" INFILL)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2250 IG
5-1/4" (133.4)
5-1/4" (133.4)
2-1/4"
(57.2)
16
DECEMBER, 2013
EC 97911-053
SCALE 3" = 1'-0"
NOTE:
Available in 5-1/4" (Shown) and 6-3/4" depths.
Consult you Kawneer Representative for more information.
MAX. UNIT WIDTH 24’-0”
2
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
kawneer.com
4
5
6
4
5
6
4
2-1/4"
(57.2)
EC 97911-053
ELEVATION IS NUMBER KEYED TO DETAILS
5
ADMD150
5-1/4" (133.4)
5-1/4" (133.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
DECEMBER, 2013
2250 IG
1
2
2
5-1/4" (133.4)
1
2
3
2
3
2-1/4"
(57.2)
6
17
CURTAIN WALL (SHEAR BLOCK - 1/4" INFILL)
SCALE 3" = 1'-0"
NOTE:
Available in 5-1/4" (Shown) and 6-3/4" depths.
Consult you Kawneer Representative for more information.
2250 IG
18
DECEMBER, 2013
ENTRANCE DETAILS ( 1/4" INFILL)
EC 97911-053
3
TRANSOM BAR
4
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
B/H OR O/P
C/H
ELEVATION IS NUMBER KEYED TO DETAILS
1A
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING
OFFSET ARM CLOSER
7/8"
(22.2)
3
1-7/8"
(47.6)
DOOR JAMB
BUTT HUNG OR
OFFSET PIVOT
1B
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN CONCEALED
OVERHEAD CLOSER
OR SURFACE CLOSER
2
4
TRANSOM BAR
DOOR JAMB
CENTER HUNG
CONCEALED OVERHEAD
OR FLOOR CLOSER
CENTER HUNG
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
1
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
1 1A 1B
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
kawneer.com
2250 IG
EC 97911-053
CORNERS ( 1/4" INFILL)
SCALE 3" = 1'-0"
90° OUTSIDE CORNER
SCREW SPLINE
90° OUTSIDE CORNER
SHEAR BLOCK
90° INSIDE CORNER
SCREW SPLINE
90° INSIDE CORNER
SHEAR BLOCK
ADMD150
19
20
2250 IG
GLASSvent
DECEMBER, 2013
TM
FOR CURTAIN WALL (1/4" INFILL)
EC 97911-053
SCALE 3" = 1'-0"
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
HEAD
1
3
2
ELEVATION IS NUMBER KEYED TO DETAILS
2
SILL
JAMB AT
SSG MULLION
3
JAMB
HINGE AND SUPPORT
HARDWARE
CAM HANDLES
SPANNER
LOCK
OUTSWING CASEMENT/PROJECT OUT
CAM HANDLES
STANDARD
A.C./CUSTODIAL/SPANNER LOCK
(REMOVABLE KEY HANDLES)
OPTIONAL
4 BAR HINGES
STANDARD
SCREWS
STANDARD
4 BAR HINGE
ADMD150
SCREEN
WITH STANDARD WICKET
SCREEN
WITH FULL WICKET
kawneer.com
© Kawneer Company, Inc., 2013
LOCKING
HARDWARE
DESCRIPTION
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
HARDWARE SELECTION GUIDE
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DECEMBER, 2013
kawneer.com
2250 IG
EC 97911-053
MISCELLANEOUS (1/4" INFILL)
SCALE 3" = 1'-0"
PRESSURE PLATE HORIZONTAL
FOR OUTSIDE GLAZING
STEEL REINFORCING
OPTIONAL STEEL
REINFORCING
AS REQUIRED
ADMD150
21
22
2250 IG
DECEMBER, 2013
WIND LOAD / DEADLOAD CHARTS
EC 97911-053
DEADLOAD CHARTS
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an
intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4"
(6.35) thick glass supported on two setting blocks placed at the loading points shown.
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4"
above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress
and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa.). Charted
curves, in all cases are for the limiting value. If the design wind load is determined through the analytical procedures
of ASCE/SEI 7-10 or earlier editions, the load shall be based on the nominal loads used in allowable stress design. A
4/3 increase in allowable stress has not been used to develop these curves. For special situations not covered by these
curves, contact your Kawneer representative for additional information.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS
2250 IG
DECEMBER, 2013
EC 97911-053
23
WIND LOAD CHARTS (1" INFILL)
(TYPE "A" SCREW SPLINE)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
16
15
.5
1
1.5
METERS
2
B
1
C
4
D
E
4.5
13
4
10
7
2
6
5
1.5
4-1/2" (114.3)
2.5
8
METERS
3
9
4
3.5
11
A
10
3
B
9
C
D
E
8
7
2.5
METERS
3.5
11
MULLION HEIGHT IN FEET
12
2-1/4" (57.2)
12
MULLION HEIGHT
13
2
6
5
1.5
4
1
3
165119 & 165029
165124 & 165029
I = 3.014(125.4 x 104)
S = 1.315(21.6 x 103)
I = 0.769(32.0 x 104)
S = 0.672(11.0 x 103)
.5
1
2
.5
1
2
3
4
5
6
7
0
8
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
SINGLE SPAN
SINGLE SPAN
METERS
.5
16
1
METERS
1.5
2
4
A
2.5
7
2
6
5
6" (152.4)
8
METERS
3
D
E
9
MULLION HEIGHT IN FEET
C
3-3/4" (95.3)
3.5
B
1
1.5
2
1.5
4
4.5
14
B
13
C
4
D
E
3.5
12
MULLION HEIGHT
12
11
.5
15
4.5
14
13
A
16
15
10
8
11
10
3
9
2.5
8
7
2
6
5
1.5
4
1
3
2
.5
1
1
3
165110 & 165016
165125 & 165016
I = 6.885(286.5 x 104)
S = 2.161(35.4 x 103)
I = 2.810(117.0 x 104)
S = 1.455(23.8 x 103)
0
2
.5
1
0
0
1
2
3
4
5
6
7
8
0
MULLION CENTERS IN FEET
kawneer.com
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD150
8
METERS
1
1
3
2
MULLION HEIGHT IN FEET
2
14
0
© Kawneer Company, Inc., 2013
1.5
15
4.5
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
.5
16
14
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
A
SINGLE SPAN
1
2
3
15
14
12
C
11
D
10
4
5
6
7
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
2
16
A
4.5
B
13
4
3.5
E
3
9
8
2.5
7
6
2
5
1.5
4
3
2
1
1
.5
165132 & 166010
165134 & 166010
I = 13.354(555.8 x 104)
S = 3.291(53.9 x 103)
I = 6.800(283.0 x 104)
S = 2.499(41.0 x 103)
0
8
MULLION CENTERS IN FEET
ADMD150
.5
METERS
0
1
1
8
2
3
1.5
E D
4
5
2
15
14
4.5
13
12
A
4
11
10
B
3.5
9
3
C
6
2.5
7
6
2
5
4
1.5
3
2
1
1
.5
7
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS (1" INFILL)
METERS
1.5
MULLION HEIGHT IN FEET
2250 IG
© Kawneer Company, Inc., 2013
0
1
5-1/4" (133.4)
METERS
MULLION HEIGHT
.5
7-1/2" (190.5)
16
METERS
SINGLE SPAN
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION HEIGHT IN FEET
24
DECEMBER, 2013
EC 97911-053
(TYPE "A" SCREW SPLINE)
SINGLE SPAN
0
MULLION CENTERS IN FEET
8
2250 IG
DECEMBER, 2013
EC 97911-053
25
WIND LOAD CHARTS (1" INFILL)
(TYPE "B" SCREW SPLINE)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
METERS
A
15
B
14
C
13
D
E
.5
1
1.5
SINGLE SPAN
METERS
2
4
4.5
4
7
2
6
5
1.5
4-1/2" (114.3)
2.5
8
METERS
3
9
2-1/4" (57.2)
MULLION HEIGHT
10
MULLION HEIGHT IN FEET
12
4
3.5
11
A
10
3
B
9
C
D
E
8
7
2.5
2
6
5
1.5
4
1
3
.5
1
165112
165123
I = 3.500(145.7 x 104)
S = 1.582(25.9 x 103)
I = 0.749(31.2 x 104)
S = 0.649(10.6 x 103)
2
.5
1
2
3
4
5
6
7
0
8
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
SINGLE SPAN
SINGLE SPAN
METERS
METERS
.5
16
1
1.5
2
13
4
B
E
8
2.5
7
2
6
5
6" (152.4)
3
D
9
METERS
C
MULLION HEIGHT IN FEET
3.5
3-3/4" (95.3)
MULLION HEIGHT
A
11
1
1.5
2
A
15
4.5
14
12
.5
16
15
10
8
1.5
4.5
14
B
13
C
12
D
E
11
4
3.5
10
3
9
2.5
8
7
2
6
5
1.5
4
4
1
3
2
.5
1
1
3
165099
165107
I = 7.350(305.9 x 104)
S = 2.540(41.6 x 103)
I = 2.624(109.2 x 104)
S = 1.378(22.6 x 103)
2
.5
1
0
0
0
1
2
3
4
5
6
7
0
8
kawneer.com
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
ADMD150
8
METERS
1
1
3
2
MULLION HEIGHT IN FEET
2
13
3.5
11
0
© Kawneer Company, Inc., 2013
1.5
14
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
15
4.5
12
.5
16
METERS
16
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
1
2
3
15
14
13
12
11
10
4
5
6
7
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
2
A
16
B
4.5
C
D
4
3.5
E
3
9
8
2.5
7
6
2
5
1.5
4
3
2
1
1
.5
165138
165077
I = 15.061(626.9 x 104)
S = 4.129(67.7 x 103)
I = 6.949(289.2 x 104)
S = 2.612(42.8 x 103)
0
8
MULLION CENTERS IN FEET
ADMD150
.5
METERS
0
1
1
9
2
3
1.5
10
D
4
5
2
15
14
4.5
13
12
A
4
11
C
B
3.5
E
3
8
2.5
7
6
2
5
4
1.5
3
2
1
1
.5
6
7
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS (1" INFILL)
METERS
1.5
MULLION HEIGHT IN FEET
METERS
5-1/4" (133.4)
2250 IG
© Kawneer Company, Inc., 2013
0
1
MULLION HEIGHT
.5
7-1/2" (190.5)
16
METERS
SINGLE SPAN
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION HEIGHT IN FEET
26
DECEMBER, 2013
EC 97911-053
(TYPE "B" SCREW SPLINE)
SINGLE SPAN
0
MULLION CENTERS IN FEET
8
2250 IG
DECEMBER, 2013
EC 97911-053
27
WIND LOAD CHARTS (1" INFILL)
(SHEAR BLOCK)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
SINGLE SPAN
.5
1
1.5
D
E
12
4.5
13
4
4
12
10
MULLION HEIGHT
3.5
11
7
2
6
5
1.5
4-1/2" (114.3)
2.5
8
METERS
3
9
3.5
11
A
10
3
B
9
C
D
E
8
7
2.5
2
6
5
1.5
4
4
1
3
1
3
2
.5
1
165128
165048
I = 3.328(138.5 x 104)
S = 1.572(25.8 x 103)
I = 0.770(32.1 x 104)
S = 0.682(11.2 x 103)
2
.5
1
0
1
2
3
4
5
6
7
0
8
1
2
4
5
6
7
MULLION CENTERS IN FEET
SINGLE SPAN
TWIN SPAN
1
8
METERS
METERS
.5
16
1.5
2
.5
30
15
1.5
1
2
9
29
4.5
14
A
28
13
A
8
2.5
E
7
2
6
5
1.5
MULLION HEIGHT IN FEET
D
MULLION HEIGHT
EQUAL
EQUAL
9
METERS
3
6" (152.4)
C
MULLION HEIGHT
B
10
8
26
3.5
11
8.5
27
4
12
MULLION HEIGHT IN FEET
3
MULLION CENTERS IN FEET
25
7.5
24
B
23
22
C
21
1
3
D
19
.5
1
6
E
5.5
17
165127
2
6.5
20
18
4
7
I = 7.223(300.6 x 104)
S = 2.442(40.0 x 103)
0
5
16
15
4.5
14
0
1
2
3
4
5
6
7
8
0
MULLION CENTERS IN FEET
kawneer.com
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD150
8
METERS
0
© Kawneer Company, Inc., 2013
2
14
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1.5
METERS
C
13
1
15
4.5
MULLION HEIGHT IN FEET
14
.5
16
B
15
METERS
2
2-1/4" (57.2)
16
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
A
SINGLE SPAN
2250 IG
28
DECEMBER, 2013
WIND LOAD CHARTS (1" INFILL)
EC 97911-053
(SHEAR BLOCK)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
METERS
2
A
2
9
29
4.5
14
B
28
B
C
26
E
10
9
2.5
8
7
METERS
3
2
6
5
1.5
MULLION HEIGHT IN FEET
D
11
MULLION HEIGHT
EQUAL
EQUAL
3.5
6" (152.4)
12
8.5
27
4
MULLION HEIGHT
13
8
C
25
7.5
24
D
23
7
22
E
21
6.5
20
6
19
18
4
1
3
165127 & 162362 Steel
1
0
1
2
3
4
5
6
7
5
16
Ia = 7.223(300.6 x 104)
Sa = 2.442(40.0 x 103)
Is = 2.228(92.7 x 104)
Ss = 1.456(23.9 x 103)
.5
0
5.5
17
2
15
4.5
14
8
0
1
2
5
6
7
8
SINGLE SPAN
TWIN SPAN
1
METERS
1.5
2
15
B
9
8.5
27
4
8
26
9
2.5
8
7
2
6
5
METERS
3
1.5
4
MULLION HEIGHT IN FEET
10
MULLION HEIGHT
EQUAL
EQUAL
3.5
3-3/4" (95.3)
D
E
2
28
MULLION HEIGHT
C
12
1.5
1
29
4.5
13
.5
30
A
11
4
MULLION CENTERS IN FEET
METERS
14
3
MULLION CENTERS IN FEET
.5
16
MULLION HEIGHT IN FEET
1.5
1
25
7.5
24
23
7
22
A
21
6.5
20
6
19
B
18
1
3
165044
2
.5
1
5.5
17
I = 2.606(108.5 x 104)
S = 1.382(22.7 x 103)
0
D C
16
15
5
E
4.5
14
0
1
2
3
4
5
6
7
8
0
MULLION CENTERS IN FEET
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
15
MULLION HEIGHT IN FEET
.5
30
METERS
1.5
METERS
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
.5
16
TWIN SPAN
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SINGLE SPAN
2250 IG
DECEMBER, 2013
EC 97911-053
29
WIND LOAD CHARTS (1" INFILL)
(SHEAR BLOCK)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
METERS
1.5
.5
30
15
14
9
A
2.5
8
7
2
6
5
1.5
4
MULLION HEIGHT IN FEET
9
MULLION HEIGHT
EQUAL
EQUAL
3
3-3/4" (95.3)
E
D
METERS
10
MULLION HEIGHT
3.5
C
11
1
3
165044 & 162362 Steel
1
3
4
5
6
7
25
8
C
7.5
24
D
23
7
22
E
21
6.5
20
6
19
18
5.5
5
16
Ia = 2.606(108.5 x 104)
Sa = 1.382(22.7 x 103)
Is = 2.228(92.7 x 104)
Ss = 1.456(23.9 x 103)
.5
2
B
26
17
2
1
15
4.5
14
8
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
SINGLE SPAN
TWIN SPAN
METERS
8
METERS
2
A
B
13
12
C
11
D
10
E
1.5
2
9
B
28
8.5
27
4
8
26
3.5
3
9
2.5
8
7
2
6
5
1.5
MULLION HEIGHT IN FEET
14
1
29
4.5
MULLION HEIGHT
EQUAL
EQUAL
15
.5
30
7-1/2" (190.5)
1.5
MULLION HEIGHT
1
METERS
.5
16
8.5
27
4
B
12
MULLION HEIGHT IN FEET
2
28
A
13
0
© Kawneer Company, Inc., 2013
1.5
1
29
4.5
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
METERS
2
25
C
24
7.5
D
23
7
E
22
6.5
21
20
6
19
18
4
1
3
.5
1
5.5
17
165139
2
I = 13.857(576.8 x 104)
S = 3.705(60.7 x 103)
0
5
16
15
4.5
14
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
kawneer.com
METERS
1
TWIN SPAN
ADMD150
8
METERS
.5
16
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
9
1
2
3
12
11
10
4
5
6
7
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
2
30
15
4.5
14
13
4
B
A
3.5
C
D
3
8
E
2.5
7
2
6
5
1.5
4
3
1
2
.5
1
I = 6.327(263.3 x 104)
S = 2.409(39.5 x 103)
165064
0
MULLION CENTERS IN FEET
8
ADMD150
.5
METERS
0
1
1
20
2
3
1.5
25
24
21
4
5
2
29
9
28
A
27
6
8.5
26
8
C
B
7.5
23
22
7
D
6.5
19
E
6
18
17
5.5
16
5
15
4.5
7
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS (1" INFILL)
METERS
1.5
MULLION HEIGHT IN FEET
2250 IG
© Kawneer Company, Inc., 2013
0
1
MULLION HEIGHT
EQUAL
EQUAL
METERS
5-1/4" (133.4)
.5
MULLION HEIGHT
16
METERS
SINGLE SPAN
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION HEIGHT IN FEET
30
DECEMBER, 2013
EC 97911-053
(SHEAR BLOCK)
TWIN SPAN
14
MULLION CENTERS IN FEET
8
2250 IG
DECEMBER, 2013
EC 97911-053
31
WIND LOAD CHARTS (1/4" INFILL)
(TYPE “A” SCREW SPLINE)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
METERS
.5
16
1
1.5
SINGLE SPAN
METERS
2
.5
16
1
1.5
15
15
2
A
4.5
4.5
14
13
B
13
4
9
3
D
E
8
2.5
7
2
6
5
MULLION HEIGHT IN FEET
B
C
5-1/4" (133.4)
10
3.5
6-3/4" (171.45)
A
11
METERS
12
MULLION HEIGHT
12
1.5
4
C
11
3.5
D
10
3
E
9
2.5
8
7
METERS
14
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
2
6
5
1.5
4
4
1
3
1
3
2
165257 & 165016
165277 & 166010
I = 5.203(216.6 x 104)
S = 1.828(30.0 x 103)
I = 10.964(456.4 x 104)
S = 2.941(48.2 x 103)
.5
1
2
.5
1
0
0
1
0
2
3
4
5
6
7
0
8
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
SINGLE SPAN
SINGLE SPAN
METERS
1
METERS
1.5
2
15
1
1.5
2
15
4.5
13
13
4
2.5
E
7
2
6
5
MULLION HEIGHT IN FEET
D
8
5-1/4" (133.4)
3
C
9
6-3/4" (171.45)
3.5
B
10
MULLION HEIGHT
A
11
1.5
4
4
B
12
METERS
12
4.5
A
14
14
MULLION HEIGHT IN FEET
.5
16
C
11
3.5
D
10
3
E
9
2.5
8
7
2
6
5
1.5
4
1
3
2
.5
1
1
3
165263
165274
I = 5.381(224.0 x 104)
S = 2.058(33.7 x 103)
I = 12.108(504.0 x 104)
S = 3.641(59.7 x 103)
0
2
.5
1
0
0
1
2
3
4
5
6
7
0
8
MULLION CENTERS IN FEET
kawneer.com
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD150
8
METERS
.5
16
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
(TYPE “B” SCREW SPLINE)
2250 IG
32
DECEMBER, 2013
WIND LOAD CHARTS (1/4" INFILL)
EC 97911-053
(SHEAR BLOCK)
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
METERS
1
1.5
METERS
2
15
1
2
9
28
14
2.5
E
7
2
6
5
1.5
MULLION HEIGHT IN FEET
D
8
MULLION HEIGHT
EQUAL
EQUAL
C
METERS
3
5-1/4" (133.4)
B
MULLION HEIGHT
3.5
11
9
8
26
A
10
8.5
27
4
12
A
25
7.5
24
23
7
22
B
21
1
3
6.5
20
6
19
C
18
4
5.5
17
165264
2
1
D
16
I = 5.318(221.4 x 104)
S = 1.996(32.7 x 103)
.5
15
0
5
E
4.5
14
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
SINGLE SPAN
TWIN SPAN
METERS
.5
16
1
METERS
1.5
2
15
13
1
1.5
2
A
9
29
4.5
A
14
.5
30
28
B
12
8.5
B
27
4
8
26
C
D
7
2
6
5
1.5
MULLION HEIGHT IN FEET
2.5
8
MULLION HEIGHT
EQUAL
EQUAL
9
5-1/4" (133.4)
3
E
MULLION HEIGHT
10
3.5
METERS
11
25
7.5
24
C
23
7
22
21
D
6.5
E
6
20
19
18
4
1
3
165264 & 162362 Steel
2
.5
1
0
0
1
2
3
4
5
6
7
5.5
17
Ia = 5.318(221.4 x 104)
Sa = 1.996(32.7 x 103)
Is = 2.228(92.7 x 104)
Ss = 1.456(23.9 x 103)
8
5
16
15
4.5
14
0
MULLION CENTERS IN FEET
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
2
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
MULLION CENTERS IN FEET
METERS
0
MULLION HEIGHT IN FEET
1.5
29
4.5
13
MULLION HEIGHT IN FEET
.5
30
METERS
.5
16
TWIN SPAN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0
1
kawneer.com
1
2
3
4
2250 IG
1.5
14
13
12
11
10
5
6
7
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
2
30
15
A
4.5
B
4
C
D
3.5
E
3
9
8
2.5
7
2
5
6
1.5
4
3
1
2
.5
1
I = 11.101(462.1 x 104)
S = 3.211(52.6 x 103)
165279
0
MULLION CENTERS IN FEET
8
ADMD150
.5
0
1
1
2
3
1.5
29
28
26
B
23
C
22
D
20
4
5
6
7
21
6.5
19
E
6
18
17
5.5
16
5
15
14
4.5
MULLION CENTERS IN FEET
7
8
METERS
EC 97911-053
MULLION HEIGHT IN FEET
METERS
MULLION HEIGHT
EQUAL
EQUAL
SINGLE SPAN
6-3/4" (171.45)
.5
MULLION HEIGHT
16
METERS
DECEMBER, 2013
33
WIND LOAD CHARTS (1/4" INFILL)
(SHEAR BLOCK)
TWIN SPAN
METERS
2
A
9
27
8.5
8
25
24
7.5
2250 IG
34
DECEMBER, 2013
DEADLOAD CHARTS
EC 97911-053
A - 1/4" GLASS (1/8 POINT LOADING)
B - 1/4" GLASS (1/4 POINT LOADING)
4-1/2" (114.3)
B - 1" GLASS (1/8 POINT LOADING)
C - 1" GLASS (1/4 POINT LOADING)
165115
165162
I = 0.405(16.9 x 104)
S = 0.263(4.3 x 103)
I = 0.373(14.5 x 104)
S = 0.242(4.0 x 103)
METERS
.5
13
1
METERS
1.5
2
1
1.5
2
12
3.5
11
10
2
6
C
METERS
2.5
7
5
GLASS HEIGHT IN FEET
B
8
10
3
A
9
1.5
4
1
3
3.5
11
3
9
A
8
2.5
B
7
2
6
5
1.5
C
4
1
3
2
2
.5
.5
1
1
0
1
2
3
4
5
6
7
8
0
1
2
4
5
SPAN IN FEET
5-1/4" (133.4)
5-1/4" (133.4)
1
6
7
8
165259
165221
I = 0.475(19.8 x 104)
S = 0.306(5.0 x 103)
I = 1.202(50.0 x 104)
S = 1.053(17.3 x 103)
METERS
.5
13
3
SPAN IN FEET
METERS
1.5
2
12
1
.5
13
1.5
2
A
12
10
GLASS HEIGHT IN FEET
B
2.5
7
2
6
5
METERS
8
10
3
A
9
1.5
4
1
3
3.5
11
3
9
B
8
2.5
7
2
6
5
1.5
4
1
3
2
METERS
3.5
11
2
.5
.5
1
1
0
0
0
1
2
3
4
5
6
7
8
SPAN IN FEET
0
1
2
3
4
5
6
7
8
SPAN IN FEET
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0
GLASS HEIGHT IN FEET
METERS
12
GLASS HEIGHT IN FEET
.5
13
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
4-1/2" (114.3)
2250 IG
DECEMBER, 2013
EC 97911-053
35
DEADLOAD CHARTS
A - 1/4" GLASS (1/8 POINT LOADING)
B - 1/4" GLASS (1/4 POINT LOADING)
5-1/4" (133.4)
B - 1" GLASS (1/8 POINT LOADING)
C - 1" GLASS (1/4 POINT LOADING)
165262
165223
I = 0.457(19.0 x 104)
S = 0.280(4.6 x 103)
I = 0.546(22.7 x 104)
S = 0.359(5.9 x 103)
METERS
1
.5
13
METERS
1.5
2
GLASS HEIGHT IN FEET
9
7
2
6
5
METERS
2.5
8
1.5
4
1
3
3.5
B
10
3
B
A
11
A
10
GLASS HEIGHT IN FEET
2
12
3.5
11
3
9
2.5
8
7
2
6
5
1.5
4
1
3
2
2
.5
.5
1
1
0
0
0
1
2
3
4
5
6
7
8
0
1
2
4
5
6
SPAN IN FEET
6" (152.4)
6" (152.4)
1
7
8
165111
165102
I = 0.463(19.3 x 104)
S = 0.299(4.9 x 103)
I = 0.447(18.6 x 104)
S = 0.276(4.5 x 103)
METERS
METERS
1.5
2
1
.5
13
12
1.5
2
12
A
11
3.5
GLASS HEIGHT IN FEET
7
2
6
5
METERS
2.5
8
1.5
4
1
3
A
B
10
3
C
9
3.5
11
B
10
GLASS HEIGHT IN FEET
3
SPAN IN FEET
.5
13
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1.5
3
C
9
2.5
8
7
2
6
5
1.5
4
1
3
2
2
.5
.5
1
1
0
0
1
2
3
4
5
6
7
0
8
0
SPAN IN FEET
kawneer.com
METERS
12
1
.5
13
1
2
3
4
5
SPAN IN FEET
ADMD150
6
7
8
METERS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
5-1/4" (133.4)
2250 IG
36
DECEMBER, 2013
DEADLOAD CHARTS
EC 97911-053
A - 1/4" GLASS (1/8 POINT LOADING)
B - 1/4" GLASS (1/4 POINT LOADING)
6-3/4" (171.45)
B - 1" GLASS (1/8 POINT LOADING)
C - 1" GLASS (1/4 POINT LOADING)
165275
165250
I = 0.589(24.5 x 104)
S = 0.356(5.8 x 103)
I = 1.882(79.3 x 104)
S = 1.651(27.1 x 103)
METERS
METERS
13
1
1.5
2
13
1.5
2
B
12
12
A
11
3.5
10
GLASS HEIGHT IN FEET
3
9
7
2
6
5
METERS
2.5
8
1.5
4
1
3
3.5
11
B
10
3
9
2.5
8
7
2
6
5
1.5
4
1
3
2
2
.5
.5
1
1
0
1
2
3
4
5
6
7
8
0
1
2
4
5
SPAN IN FEET
6-3/4" (171.45)
6-3/4" (171.45)
1
7
8
165272
165253
I = 0.654(27.2 x 104)
S = 0.406(6.7 x 103)
METERS
METERS
.5
6
I = 0.539(22.4 x 104)
S = 0.319(5.2 x 103)
1.5
2
1
.5
13
13
1.5
2
12
12
A
11
3.5
10
GLASS HEIGHT IN FEET
3
9
7
2
6
5
METERS
2.5
8
1.5
4
1
3
3.5
11
B
10
GLASS HEIGHT IN FEET
3
SPAN IN FEET
3
9
A
B
8
2.5
7
2
6
5
1.5
4
1
3
2
2
.5
.5
1
1
0
0
0
1
2
3
4
5
6
7
0
8
1
2
3
4
5
6
7
8
SPAN IN FEET
SPAN IN FEET
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0
METERS
GLASS HEIGHT IN FEET
1
.5
METERS
.5
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6-3/4" (171.45)
2250 IG
DECEMBER, 2013
EC 97911-053
37
DEADLOAD CHARTS
A - 1/4" GLASS (1/8 POINT LOADING)
B - 1/4" GLASS (1/4 POINT LOADING)
7-1/2" (190.5)
B - 1" GLASS (1/8 POINT LOADING)
C - 1" GLASS (1/4 POINT LOADING)
165133
165069
I = 0.583(24.3 x 104)
S = 0.355(5.8 x 103)
I = 0.332(13.8 x 104)
S = 0.527(8.6 x 103)
METERS
1
.5
13
METERS
1.5
2
12
1.5
2
10
GLASS HEIGHT IN FEET
3
9
C
7
2
6
5
METERS
2.5
8
1.5
4
1
3
3.5
11
3
9
A
8
2.5
B
7
2
6
5
1.5
C
4
1
3
2
2
.5
.5
1
1
0
0
1
2
3
4
5
6
7
8
0
1
2
5
6
7-1/2" (190.5)
7-1/2" (190.5)
1
7
8
165137
165057
I = 0.534(22.2 x 104)
S = 0.318(5.2 x 103)
I = 0.251(10.5 x 104)
S = 0.383 (6.3 x 103)
METERS
1.5
2
1
.5
13
1.5
2
12
12
A
11
3.5
10
GLASS HEIGHT IN FEET
9
2.5
8
7
C
6
2
5
1.5
4
1
3
A
10
3
B
3.5
11
METERS
GLASS HEIGHT IN FEET
4
SPAN IN FEET
METERS
© Kawneer Company, Inc., 2013
3
SPAN IN FEET
.5
13
3
9
2.5
8
7
2
B
6
5
1.5
4
C
3
1
2
2
.5
.5
1
1
0
0
0
1
2
3
4
5
6
7
0
8
SPAN IN FEET
kawneer.com
METERS
3.5
B
10
GLASS HEIGHT IN FEET
1
12
A
11
0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
.5
13
1
2
3
4
5
SPAN IN FEET
ADMD150
6
7
8
METERS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
7-1/2" (190.5)
2250 IG
DECEMBER, 2013
THERMAL CHARTS
EC 97911-053
Project Specific U-Factor
Example Calculation
15'-8" F.W.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2'-0"
D.L.O.
9'-6" F.H.
7'-0"
D.L.O.
5'-0" D.L.O.
= 0.42 Btu/(ft2·h·°F)
Example Glass U-Factor
Total Daylight (Vision) Area = 3(5' x 7') + 3(5' x 2') = 135 ft2
Projected Total Area = 15'-8" x 9'-6" = 148.83 ft2
Percent of Vision Glass
= (Total Daylight Area ÷ Projected Total Area)100
= (135 ÷ 148.83)100 = 91%
System U-factor vs Percent of Glass Area
0.40
0.30
70
75
80
85
Vision Area / Total Area %
Based on 91% glass and center of glass U-factor of 0.42
system U-factor is equal to 0.49 Btu/hr·ft2·°F
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
0.50
0.49
0.20
90
91%
COG
U-factor
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.60
System U-factor (BTU/hr/ft2/°F)
(N
E
L )
P ign
M es
A D
X or
E ot f
0.70
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.80
95
38
2250 IG
DECEMBER, 2013
EC 97911-053
39
THERMAL CHARTS
System U-Factors for Vision Glass (Captured Shear Block Option)
1.05
COG
U-factor
(6.00)
1.00
0.95
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.90
(5.00)
0.85
System U-factor
0.60
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
System U-factor
Btu
2
hr·ft ·°F
0.65
W
2
m ·°C
(4.50)
0.75
0.70
W
2
m ·°C
0.80
(4.00)
(3.50)
0.55
(2.73)
(2.61)
(2.50)
(2.39)
(2.27)
(2.16)
(2.05)
(1.93)
(1.82)
(1.71)
(1.59)
(1.48)
(1.37)
(1.25)
(1.14)
95
(3.00)
0.50
0.45
(2.50)
0.40
0.35
(2.00)
0.30
90
85
80
75
70
Vision Area / Total Area (%)
Note:
Values in parentheses are metric.
COG = Center Of Glass.
Charts are generated per AAMA 507.
System U-Factor for Vision Glass (Captured Ribbon Window Option)
0.95
COG
U-factor
(5.50)
0.90
(5.00)
0.85
0.80
(4.50)
0.75
0.70
0.60
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.55
(2.73)
(2.61)
(2.50)
(2.39)
(2.27)
(2.16)
(2.05)
(1.93)
(1.82)
(1.71)
(1.59)
(1.48)
(1.37)
(1.25)
(1.14)
0.50
(3.00)
(2.50)
0.40
0.35
(2.00)
0.30
90
85
80
Vision Area / Total Area (%)
kawneer.com
(3.50)
0.45
0.25
95
(4.00)
Btu
2
hr·ft ·°F
0.65
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
(5.50)
ADMD150
75
70
(1.50)
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
ADMD150
75
70
0.00
Vision Area / Total Area (%)
Charts are generated per AAMA 507
kawneer.com
© Kawneer Company, Inc., 2013
COG
SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
THERMAL CHARTS (Captured Shear Block Option)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2250 IG
System SHGC
40
DECEMBER, 2013
EC 97911-053
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-053
COG
VT
0.75
0.70
0.45
0.45
0.40
0.40
0.35
0.35
0.30
kawneer.com
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
Vision Area / Total Area (%)
Charts are generated per AAMA 507
ADMD150
75
70
0.00
System VT
DECEMBER, 2013
2250 IG
THERMAL CHARTS (Captured Shear Block Option)
System Visible Transmittance (VT) vs Percent of Vision Area
0.80
0.75
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
41
COG
SHGC
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
ADMD150
75
70
0.00
Vision Area / Total Area (%)
Charts are generated per AAMA 507
kawneer.com
© Kawneer Company, Inc., 2013
0.80
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
THERMAL CHARTS (Captured Ribbon Window Option)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2250 IG
System SHGC
42
DECEMBER, 2013
EC 97911-053
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-053
COG
VT
0.75
0.70
0.45
0.45
0.40
0.40
0.35
0.35
0.30
kawneer.com
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
Vision Area / Total Area (%)
Charts are generated per AAMA 507
ADMD150
75
70
0.00
System VT
DECEMBER, 2013
2250 IG
THERMAL CHARTS (Captured Ribbon Window Option)
System Visible Transmittance (VT) vs Percent of Vision Area
0.80
0.75
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
43
2250 IG
DECEMBER, 2013
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
EC 97911-053
Captured Shear Block Option
Thermal Transmittance1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.48
0.64
0.46
0.62
0.44
0.60
0.42
0.59
0.40
0.57
0.38
0.56
0.36
0.54
0.34
0.52
0.32
0.51
0.30
0.49
0.28
0.47
0.26
0.46
0.24
0.44
0.22
0.43
0.20
0.41
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.70
0.75
0.68
0.70
0.65
0.70
0.63
0.65
0.61
0.65
0.59
0.60
0.56
0.60
0.54
0.55
0.52
0.55
0.50
0.50
0.47
0.50
0.45
0.45
0.42
0.45
0.41
0.40
0.38
0.40
0.36
0.35
0.33
0.35
0.32
0.30
0.29
0.30
0.27
0.25
0.24
0.25
0.23
0.20
0.20
0.20
0.18
0.15
0.15
0.15
0.14
0.10
0.11
0.10
0.09
0.05
0.06
0.05
0.05
NOTE: For glass values that are not listed, linear interpolation is permitted.
1. U-Factors are determined in accordance with NFRC 100.
2. SHGC and VT values are determined in accordance with NFRC 200.
3. Glass properties are based on center of glass values and are obtained from your glass supplier.
4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of
2000mm wide by 2000mm high (78-3/4" by 78-3/4").
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
SHGC Matrix 2
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
44
2250 IG
DECEMBER, 2013
EC 97911-053
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
Captured Ribbon Window Option
Thermal Transmittance1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.48
0.65
0.46
0.63
0.44
0.61
0.42
0.60
0.40
0.58
0.38
0.57
0.36
0.55
0.34
0.53
0.32
0.52
0.30
0.50
0.28
0.49
0.26
0.47
0.24
0.46
0.22
0.44
0.20
0.42
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.66
0.70
0.64
0.70
0.62
0.65
0.59
0.65
0.57
0.60
0.55
0.60
0.53
0.55
0.50
0.55
0.48
0.50
0.46
0.50
0.44
0.45
0.42
0.45
0.40
0.40
0.37
0.40
0.35
0.35
0.33
0.35
0.31
0.30
0.28
0.30
0.26
0.25
0.24
0.25
0.22
0.20
0.20
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.11
0.10
0.09
0.05
0.06
0.05
0.04
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SHGC Matrix 2
NOTE: For glass values that are not listed, linear interpolation is permitted.
1. U-Factors are determined in accordance with NFRC 100.
2. SHGC and VT values are determined in accordance with NFRC 200.
3. Glass properties are based on center of glass values and are obtained from your glass supplier.
4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of
2000mm wide by 2000mm high (78-3/4" by 78-3/4").
kawneer.com
ADMD150
45
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2250 IG
BLANK PAGE
ADMD150
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
46
DECEMBER, 2013
EC 97911-053