UNISONIC TECHNOLOGIES CO., LTD UCD4050B Preliminary CMOS IC CMOS HEX BUFFER/CONVERTERS DESCRIPTION SOP-16 The UCD4050B devices are non-inverting hex buffers, and feature logic-level conversion using only one supply voltage(VCC).The input-signal high level(VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. FEATURES TSSOP-16 * UCD4050B non inverling * High Sink Current for Driving 2 TTL Loads * High-To-Low Level Logic Conversion * Maximum Input Current of 1uA at 18V Over Full Package Temperature Range * 5V, 10V and 15V Parametric Ratings ORDERING INFORMATION Ordering Number Lead Free Halogen Free UCD4050BL-S16-R UCD4050BG-S16-R UCD4050BL-S16-T UCD4050BG-S16-T UCD4050BL-P16-R UCD4050BG-P16-R UCD4050BL-P16-T UCD4050BG-P16-T www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd Package Packing SOP-16 SOP-16 TSSOP-16 TSSOP-16 Tape Reel Tube Tape Reel Tube 1 of 5 QW-R502-864.b UCD4050B Preliminary PIN CONFIGURATION FUNCTION TABLE (each gate) INPUT(A) OUTPUT(G) H L H L CMOS IC LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-864.b UCD4050B Preliminary CMOS IC ABSOLUTE MAXIMUM RATING(TA=25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5 ~ 20 V Input Voltage VIN -0.5~VDD+0.5 V Output Voltage VOUT -0.5~VDD+0.5 V Storage Temperature TSTG -65 ~ + 150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Operating Temprature SYMBOL VCC TOPR TEST CONDITIONS MIN 5 -40 TYP MAX 15 125 UNIT V °С TYP MAX UNIT ELECTRICAL CHARACTERISTICS(TA=25°С, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS VCC=5V, VOUT=4.5V High-Level Input Voltage VIH VCC=10V, VOUT=9.0V VCC=15V, VOUT=13.5V VCC=5V, VOUT=0.5V Low-Level Input Voltage VIL VCC=10V, VOUT=1.0V VCC=15V, VOUT=1.5V VCC=5V, No Load High-Level Output Voltage VOH VCC=10V, No Load VCC=15V, No Load VCC=5V, No Load Low-Level Output Voltage VOL VCC=10V, No Load VCC=15V, No Load VCC=5V, VOUT=4.6V VCC=5V, VOUT=2.5V High-Level Output Current IOH (Note) VCC=10V, VOUT=9.5V VCC=15V, VOUT=13.5V VCC=5V, VOUT=0.4V Low-Level Output Current IOL VCC=10V, VOUT=0.5V (Note) VCC=15V, VOUT=1.5V Input Leakage Current II(LEAK) VCC=15V ,VIN=VCCor GND VCC=5V, VIN=VCCorVSS, IOUT=0 VCC=10V, VIN=VCCorVSS, IOUT=0 Quiescent Supply Current IQ VCC=15V, VIN=VCCorVSS, IOUT=0 VCC=20V, VIN=VCCorVSS, IOUT=0 Note: IOL and IOH are tested one output at a time UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 3.5 7.0 11.0 V 1.5 3.0 4.0 4.95 9.95 14.95 -0.65 -2.1 -1.65 -4.3 3.2 8.0 24.0 5 10 15 0 0 0 -1.2 -3.9 -3.0 -8.0 6.4 16.0 48.0 0.02 0.02 0.02 0.02 V V 0.05 0.05 0.05 V mA ±0.1 1 2 4 20 µA µA 3 of 5 QW-R502-864.b UCD4050B Preliminary SWITCHING CHARACTERISTICS(TA=25°С, Input: tR=tF=20ns, unless otherwise specified ) PARAMETER SYMBOL tPLH Propagation delay from Input(A or B) to Output(Y) tPHL tTLH Transition Time tTHL CMOS IC TEST CONDITIONS VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ MIN TYP 70 40 30 55 22 15 80 40 30 30 20 15 MAX 140 80 60 110 55 30 160 80 60 60 40 30 UNIT TYP 5 MAX 7.5 UNIT pF ns ns OPERATING CHARACTERISTICS(TA=25°С, unless otherwise specified) PARAMETER Average Input Capacitance SYMBOL TEST CONDITIONS CIN Any Input UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 4 of 5 QW-R502-864.b UCD4050B Preliminary CMOS IC TEST CIRCUIT AND WAVEFORMS Output RL 200kΩ CL 50pF VCC VI 50% 50% tPLH tPHL 0V VOH VO 50% 50% VOL Note: CL includes probe and jig capacitance. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-864.b