1.60

HT16511
1/8 to 1/16 Duty VFD Controller
Revision # 1.60

Modifications made on October 31, 2013
In the Features and other related sections, the 52-pin QFP package was changed to
52-pin LQFP.

The Package Information sections was modified.
Revision # 1.50
Modifications made on September 30, 2011

The Pad Assignment section was modified.

In the D.C. Characteristics section, the IOL and fOS values were modified.
Revision # 1.40
Modifications made on April 13, 2011

The D.C. and A.C. Characteristics table were modified.

The Application Circuits section was modified.

The Package Information section was modified.
Revision # 1.30

Modifications made on December 21, 2004
At the Package Information section, the Min. & Max. dimension for A & C was
modified.
Revision # 1.20

Modifications made on December 22, 2003
At the Package Information section, the Nominal dimension for E was modified from
0.65 to 1.00 mm.
Revision # 1.10
Modifications made on September 18, 2003

At the Features section, D.C. Characteristics table and other related sections, the
maximum value for the High voltage output VDD was changed from 30V to 35V.

The Application Circuits diagram was modified.
Revision # 1.00
This was posted on December 26, 2002
Similar pages