Product Specification

NHD-7.0-800480EF-ASXV#-T
TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module
NHD7.0800480EFASXV#T-
Newhaven Display
7.0” Diagonal
800x480 Pixels
Model
Built-in Driver / No Controller
High Brightness, White LED Backlight
TFT
MVA, Wide Temperature
RoHS Compliant
Resistive Touch Panel
Newhaven Display International, Inc.
2661 Galvin Ct.
Elgin IL, 60124
Ph: 847-844-8795
Fax: 847-844-8796
www.newhavendisplay.com
[email protected]
[email protected]
Document Revision History
Revision
0
Date
3/10/16
Description
Initial Release
Functions and Features
•
•
•
•
•
•
800x480 resolution
LED backlight
24-bit digital RGB interface
16.7M colors
Premium high brightness display
4-wire resistive Touch Panel
[2]
Changed by
SB
L
A
I
Mechanical Drawing
165±0.3
164.3±0.2/TP
V,A156.68/TP
156.7±0.2/BZ OPENING
A,A155.68/TP
153.84 A.A
0.7±0.2
(6)
E
D
I
XR
ACTIVE AREA CENTER
YD
40
DETAIL A
1
O
C
P1*3=3
5±0.1
4
1
22.4±0.5
Notes:
1. Display Size: 7” TFT
2. Optimal Viewing Direction: Full View
3. Display Mode: Transmissive / Normally White / Anti-Glare
4. Driver IC: HX8264-D02
5. Power Supply Voltage: 3.3V
D
6. Backlight: White LED / 9.6 V / 180 mA (Typ)
A+
K7. Brightness: 600 cd/m²
LED
CIRCUIT
8. 3M Brightness Enhancement Film
3*9=27EA,20mA*9=180mA
9. Touch Panel: 4-Wire Resistive
1
2
10±0.5
Contact side
0.3±0.05
0.3±0.05
3
4
4-R2
74.93±0.5
1
CENTER LINE
40
1
3.5±0.3
1.75
0.3±0.03
1
5±0.3
(86.1)
78.17±0.5
(17.07)
COMPONENT
AREA
W=0.5±0.05
P1X3=3±0.1
20.39±0.5
C
1
YU YD
XL XR
Newhaven Display PO_WWYY
NHD-7.0-800480EF-ASXV#-T
W=0.3±0.03
P0.5X(40-1)=19.5±0.05
0.5±0.1
20.5±0.1
.2
R0
F
N
(39)
4
5
(4)
15±1
71±0.5
(4)
COMPONENT AREA
STIFFENER (PI)
1.5 Max.
COVERLAYER OPEN
6
Description
T
N
(5)
BACK
800(RGB)*480
FRONT
(49.7)
85.63 A.A
89.1P0.2/BZ OPENING
V,A88.52/TP
A,A87.52/TP
TEAR TAPE
104±0.3 OUTLINE
99±0.2/TP
(5)
(80.82)
XL
5
Rev
4.7±0.35
6.11
(6.5)
(7.26)
YU
B
4
36.04
4.5±0.5
3
COVERLAYER OPEN
2
5.3
(5.499)
(5.999)
(6.889)
A
2.019±0.2
1
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Date
SYMBOL
LED-K
LED-A
GND
VDD
R0
R1
R2
R3
R4
R5
R6
R7
G0
G1
G2
G3
G4
G5
G6
G7
B0
B1
B2
B3
B4
B5
B6
B7
GND
DCLK
DISP
HSYNC
VSYNC
DEN
NC
GND
NC(XR)
NC(YD)
NC(XL)
NC(YU)
03/10/16
4
Unit
mm
5
Model:
NHD-7.0-800480EF-ASXV#-T
6
The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission.
[3]
C
D
Date
±0.3mm
B
PIN Assignment
DETAIL A (3:1)
Gen. Tolerance
A
Pin Description
TFT:
Pin No.
1
2
3
4
5-12
13-20
21-28
29
30
31
32
33
34
35
36
37
38
39
40
Symbol
LED-K
LED-A
GND
VDD
[R0-R7]
[G0-G7]
[B0-B7]
GND
DCLK
DISP
HSYNC
VSYNC
DEN
NC
GND
NC(XR)
NC(YD)
NC(XL)
NC(YU)
Connection
Power Supply
Power Supply
Power Supply
Power Supply
MPU
MPU
MPU
Power Supply
MPU
MPU
MPU
MPU
MPU
Power Supply
-
Function Description
Backlight Cathode (Ground)
Backlight Anode (180mA @ 9.6V)
Ground
Supply Voltage for LCD and logic (+3.3V)
Red Data signals
Green Data signals
Blue Data signals
Ground
Dot data Clock
Display on/off DISP=1:Display on
Line synchronization signal
Frame synchronization signal
Data Enable signal
No Connect
Ground
No Connect
No Connect
No Connect
No Connect
Recommended connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact)
Resistive Touch Panel:
Pin No.
1
2
3
4
Symbol
XL
YD
XR
YU
Connection
Touch Controller
Touch Controller
Touch Controller
Touch Controller
Function Description
Touch Panel – Left
Touch Panel – Down
Touch Panel – Right
Touch Panel – Up
Recommended connector: 1.0mm pitch 4-Conductor FFC. Molex p/n: 52207-0485 (top contact)
[4]
Electrical Characteristics
Item
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Supply Current
“H” Level Input
“L” Level Input
“H” Level Output
“L” Level Output
Backlight Supply Voltage
Backlight Supply Current
Backlight Lifetime*
Symbol
Top
Tst
VDD
IDD
VIH
VIL
VOH
VOL
Condition
Absolute Max
Absolute Max
o
VDD=3.3V 25 C
-
Min.
-20
-30
3.0
60
0.7*VDD
GND
VDD-0.4
-
Typ.
3.3
85
-
Max.
+70
+80
3.6
120
VDD
0.3*VDD
GND+0.4
Unit
⁰C
⁰C
V
mA
V
V
V
V
VLED
ILED
-
VLED=9.6V
ILED = 180 mA
Top = 25°
8.7
20,000
9.6
180
50,000
9.9
-
V
mA
Hrs.
Min.
-
Typ.
70
Max.
-
Unit
⁰
480
-
70
70
70
400
600
25
35
⁰
⁰
⁰
2
cd/m
ms
*Backlight Lifetime is rated as Hours until half-brightness, under normal operating conditions.
Optical Characteristics
Optimal
Viewing
Angles
Item
Symbol
Condition
Top
Bottom
Left
Right
ϕY+
ϕYθXθX+
Cr ≥ 10
Cr
L
Tr+Tf
-
Contrast Ratio
Luminance
Response Time (rise)
Touch Panel Characteristics
Item
Linearity
Terminal Resistance – X-Axis
Terminal Resistance – Y-Axis
Insulation Resistance
Operating Voltage
Chattering
Activation Force
Pen Writing Durability
Pitting Durability
Surface Hardness
Min.
-3
50
350
20
10
100,000
1,000,000
3
Typ.
-
Max.
3
400
1100
10
10
100
-
Driver Information
Unit
%
Ω
Ω
MΩ
V
ms
g
Characters
Touches
H
Built-in HX8264-D02 Source Driver: http://www.newhavendisplay.com/app_notes/HX8264-D02.pdf
Built-in HX8664-B Gate Driver: http://www.newhavendisplay.com/app_notes/HX8664-B.pdf
[5]
Timing Characteristics
Horizontal Timing
Vertical Timing
[6]
Horizontal Timing
Vertical Timing
[7]
Parallel 24-bit RGB mode
Input Clock and Data Timing
Source Output Timing
[8]
Vertical Timing HV (Cascade)
Vertical Timing DE (Cascade)
Gate Output Timing (Cascade)
[9]
Vertical Timing HV (Dual Gate)
Vertical Timing DE (Dual Gate)
Gate Output Timing (Dual Gate)
[10]
Power ON/OFF Sequence
Enter/Exit Standby Mode Sequence
[11]
Quality Information
Test Item
Content of Test
High Temperature storage
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Static electricity test
Test Condition
Endurance test applying electric static
discharge.
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
2
-30⁰C , 96hrs
1,2
+70⁰C, 96hrs
2
-20⁰C , 96hrs
1,2
+50⁰C , 90% RH , 96hrs
1,2
-30⁰C, 30min -> 80⁰C, 30min,
Change time: 5min,
10 cycles
10-55Hz , 1.5mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=800V, RS=1.5kΩ, CS=100pF
One time
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information
See Terms and Conditions at http://www.newhavendisplay.com/index.php?main_page=terms
[12]
Note
+80⁰C , 96hrs
3