Document 110-1 5 mm Tunable Inductor –164, 165 Series • These tunables offer the compactness of a 5 mm coil and the low drift reliability of an insert molded coil. • Inductance values from 9 to over 280 nH • Optional plated brass cans provide integral shielding. • Can be ordered without cores for use as fixed inductors. Designer’s Kit M305 contains 2 each of all parts Core material Aluminum, 0.187″ (4.75 mm) long. Terminations Leads: RoHS compliant tin-silver over copper. Other terminations available at additional cost. Shield can tabs: Tin-silver over nickel over brass Weight 164 series unshielded: 0.16 – 0.31 g; with shield can: 0.45 – 0.60 g 165 series unshielded: 0.15 – 0.25 g; with shield can: 0.43 – 0.54 g Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Packaging tubes: –40°C to +80°C Resistance to soldering heat: Wave solder only. Recommended maximum board surface temperature of 168°C (334°F) for no more than three seconds. Pre-heating is recommended to minimize time over the solder nozzle. Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) Two per billion hours / 1/2 billion hours, calculated per Telcordia SR-332 Packaging 50 parts per tube PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. IN 1 TRITUNER 3 TOOLS SEE INDEX TUNING WRENCH Unshielded Styles 0.139 ±0.005 3,53 ±0,13 0.130 ±0.040 3,30 ±1,02 0.310 ±0.020 7,87 ±0,51 0.139 ±0.005 3,53 ±0,13 Start 0.018 dia 0,46 0.205 ±0.005 square 5,21 ±0,13 Shielded Styles Recommended Board Layout 0.0695 1,765 0.051 (for shield 1,30 can tabs) 0.340 max 8,64 0.120 ±0.010 3,05 ±0,25 Tab length Finish CL 0.106 2,69 Part marking this side Start 0.120 dia hole 3,05 165-XX XXXX CL 0.0695 1,765 0.038 0,965 0.212 Tab centers 5,38 0.031 ±0.010 0,79 ±0,25 Series number US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Internal code Dash number 0.230 square max 5,84 Document 110-1 Revised 08/31/09 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 110-2 5 mm Tunable Inductor — Unshielded No core at L max3 at L min4 2 5 2 5 L (nH) Q min L (nH) Q min L (nH)2 Q min5 Part number1 Color Turns Freq (MHz) Irms6 No core SRF min (MHz) (A) 164-01A06LBrown 164-02A06LRed 164-03A06LOrange 164-04A06LYellow 164-05A06LGreen 164-06A06LBlue 164-07A06LViolet 164-08A06LGray 164-09A06LWhite 164-10A06LBlack 164-11A06LBrown 11/2 19145 19145 16112 150 21/2 34 13834 1382696 150 31/2 55 13055 1303879 150 41/2 77 11977 1195272 150 51/2 101 10899866564 150 61/2 128 107 126758360 100 71/2 156 106 150689757 100 81/2 183100178 62112 53 100 91/2 216100190 62131 53 100 101/2 24892 22355 14851 100 111/2 28192 24655 17051 100 2000 1260 960 850 770 730 640 570 540 490 360 7.2 5.1 4.4 3.7 3.6 3.3 3.1 2.9 2.7 2.5 2.3 165-00A06LBlack 165-01A06LBrown 165-02A06LRed 165-03A06LOrange 165-04A06LYellow 165-05A06LGreen 165-06A06LBlue 165-07A06LViolet 1/2 9147 9147 9131 150 11/2 18145 18145 15112 150 21/2 32 14332 1432592 150 31/2 48 13845 1353384 150 41/2 64 13360 1144376 150 51/2 83 12578 1105473 150 61/2 103 12090946870 150 71/2 122 115 105927969 150 6000 2850 1860 1410 1130 820 800 770 8.1 6.5 4.9 4.2 3.8 3.6 3.4 3.1 Typical Q vs Frequency 164 Series No Core 164 Series Al Core 180 180 160 160 140 140 01 120 100 11 120 03 05 Q factor 1. To order fixed inductance parts without cores, eliminate the “A06”, e.g. 164-01. 2. Inductance measured on Agilent/HP 4286A Impedance Analyzer with 16092A Spring Clip Fixture. 3. L max measured with core halfway out top of form. 4. L min measured with core centered in winding. 5. Q measured on Agilent/HP 4286A with 16092A fixture, direct connect to Agilent/ HP 4342A Q‑Meter and Meguro MQ-171 Q-Meter with 0.5″ bus bars. 6. Current that causes a 15°C rise above 25°C ambient. 7. Electrical specifications 25°C. Q factor 07 01 100 80 80 60 60 40 40 20 20 10 03 05 11 10 20 40 60 80 100 200 400 20 40 Frequency (MHz) 165 Series No Core 80 100 200 400 165 Series Al Core 180 180 160 160 00 140 120 Q factor 60 Frequency (MHz) 07 04 140 02 00 120 Q factor Notes: 100 80 100 60 60 40 40 20 20 10 02 80 07 04 10 20 40 60 80 100 200 400 Frequency (MHz) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 20 40 60 80 100 200 400 Frequency (MHz) Document 110-2 Revised 08/31/09 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 110-3 IN 1 TRITUNER 3 TOOLS SEE INDEX TUNING WRENCH 5 mm Tunable Inductor — Shielded No core at L max3 at L min4 2 5 2 5 L (nH) Q min L (nH) Q min L (nH)2 Q min5 Part number1 Color Turns 1. To order fixed inductance parts without cores, eliminate the “A06”, e.g. 164-01S. 2. Inductance measured on Agilent/HP 4286A Impedance Analyzer with 16092A Spring Clip Fixture. 3. L max measured with core halfway out top of form. 4. L min measured with core centered in winding. 5. Q measured on Agilent/HP 4286A with 16092A fixture, direct connect to Agilent/ HP 4342A Q‑Meter and Meguro MQ-171 Q-Meter with 0.5″ bus bars. 6. Current that causes a 15°C rise above 25°C ambient. 7. Electrical specifications 25°C. 9138 9138 9121 150 16124 16124 14104 150 25 11025 1102187 150 35 10433 1022878 150 469741903569 150 579250824367 150 688659755265 150 808570746064 150 (A) 2100 1300 1100 940 980 800 750 580 550 490 400 7.2 5.1 4.4 3.7 3.6 3.3 3.1 2.9 2.7 2.5 2.3 6000 2570 1670 1230 1150 820 800 770 8.1 6.5 4.9 4.2 3.8 3.6 3.4 3.1 Typical Q vs Frequency 164 Series No Core 164 Series Al Core 180 180 160 160 140 140 120 120 01 Q factor Notes: 1/2 11/2 21/2 31/2 41/2 51/2 61/2 71/2 100 01 100 03 80 05 60 11 80 03 60 40 40 20 20 10 05 11 10 20 40 60 80 100 200 400 20 40 Frequency (MHz) 165 Series No Core 80 100 200 400 165 Series Al Core 180 180 160 160 00 140 140 120 Q factor 60 Frequency (MHz) 120 02 100 Q factor 165-00A06SLBlack 165-01A06SLBrown 165-02A06SLRed 165-03A06SLOrange 165-04A06SLYellow 165-05A06SLGreen 165-06A06SLBlue 165-07A06SLViolet Irms6 No core SRF min (MHz) 11/2 16124 16124 14106 150 21/2 27 10827 1082289 150 31/2 419241923272 150 41/2 568656844366 150 51/2 718071795360 150 61/2 887980776559 150 71/2 10575 101707654 100 81/2 12274 117648754 100 91/2 14171 13462 10053 100 101/2 16069 15060 11351 100 111/2 17969 16460 12751 100 Q factor 164-01A06SLBrown 164-02A06SLRed 164-03A06SLOrange 164-04A06SLYellow 164-05A06SLGreen 164-06A06SLBlue 164-07A06SLViolet 164-08A06SLGray 164-09A06SLWhite 164-10A06SLBlack 164-11A06SLBrown Freq (MHz) 04 07 80 02 80 60 60 40 40 20 20 10 00 100 04 07 10 20 40 60 80 100 200 400 Frequency (MHz) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 20 40 60 80 100 200 400 Frequency (MHz) Document 110-3 Revised 08/31/09 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.