CS60-010

Document 133
50/60Hz Current Sensor – CS60-010
This Coilcraft current sensor is intended for measuring
current from 1 to 10 A rms. The sensor functions as the
encapsulated secondary of a current transformer, while
the conductor carrying the current to be measured serves
as the “one turn primary.” Sensitivity may be enhanced by
increasing primary turns.
Minimum wall thickness of the hole is 0.5 mm to meet
IEC 380 and other requirements when used with an insulated conductor.
Applications include sensing branch circuit overload and
detecting load drop or shutdown.
Coilcraft Designer’s Kit P403 contains two samples
of this sensor and 15 samples of nine different high
frequency current sensors. To order, contact Coilcraft or
visit http://order.coilcraft.com.
Part Sensed
Vout
number1current Irmstolerance
CS60-010_
1–10 A rms±10%
Typical Response
100
(For sensed current above 10 Arms, see CS60 data sheet)
90
1. When ordering, please specify termination code:
0.75
max
19,05
0.550
max
13,97
Date code
0.125
min
3,175
0.80
max
20,30
80
70
VOUT (mVolts p-p)
CS60-010L
Termination:L =RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
2. Ambient temperature range −40°C to +85°C.
3. Electrical specifications at 25°C.
60
0
-01
60
S
C
50
40
30
20
10
1
0.34 max
8,64
0.45
max
11,43
3
3
0.125
max
3,175
Dimensions are in
Weight: 5.8 g
2
3
0.033 ±0.002
0,84 ±0,05
1
6
7
8
9
10
Typical Application
Irms
0.50 ±0.015
12,7 ±0,38
inches
mm
5
4
Current (A rms)
1+
3−
50
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Vout rms
Document 133 Revised 02/01/05
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages