DO3316P

Document 179-1
SMT Power Inductors – DO3316P Series
• High energy storage and very low resistance
• High inductance values are perfect for EL driver applications.
Designer’s Kit C378 contains 3 of each 20% part
Core material Ferrite
Terminations RoHS compliant electroplated gold (<50 µin) over nickel
over phos bronze. Other terminations available at additional cost.
Weight 0.92 – 1.23 g
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +125°C (ambient + temp rise) Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000 per 13″ reel Plastic tape: 24 mm wide,
0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCRSRF
Part L2 Percentmax typ4 Isat5 Irms6
number1
(µH)
tol3 (Ohms)(MHz) (A) (A)
DO3316P-102ML_1.020 0.009100 9.0 6.8
DO3316P-152ML_1.520 0.010 90 8.06.4
DO3316P-222_L_2.2
20,100.012 80 7.0 6.1
DO3316P-332_L_3.3
20,100.015 65 6.4 5.4
DO3316P-472_L_4.7
20,100.018 45 5.4 4.8
DO3316P-682_L_6.8
20,100.027 38 4.6 4.4
DO3316P-103_L_10 20,100.038 30 3.8 3.9
DO3316P-153_L_15 20,100.046 27 3.0 3.1
DO3316P-223_L_22 20,100.085 19 2.3 2.7
DO3316P-333_L_33 20,100.10 15 2.0 2.1
DO3316P-473_L_47 20,100.14 12 1.6 1.8
DO3316P-683_L_68 20,100.20 10 1.4 1.5
DO3316P-104_L_100 20,100.28
9 1.2 1.3
DO3316P-154_L_150 20,100.40
6 1.0 1.0
DO3316P-224_L_220 20,10 0.61
5 0.800.80
DO3316P-334_L_330 20,10 1.02
4.50.600.60
DO3316P-474_L_470 20,10 1.27
3.50.500.50
DO3316P-684_L_680 20,10 2.02
2.50.400.40
DO3316P-105_L_1000
20,10 3.00
2.00.300.30
DO3316P-155_L_1500
20,10 4.49
1.70.290.27
DO3316P-335_L_3300
20,10 8.97
1.10.190.17
1. When ordering, specify tolerance, termination and packaging codes:
DO3316P-105MLD
Tolerance: M= 20%, K = 10% (Table shows stock tolerances in bold.)
Termination:L=RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:D
=13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF >13 MHz measured using Agilent/HP 8753D network analyzer;
<13 MHz using Agilent/HP 4192A.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from
its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 179-1 Revised 09/25/12
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 179-2
SMT Power Inductors – DO3316P Series
Typical L vs Current
Typical L vs Frequency
10000
10000
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
10 µH
10
1 µH
1
1000 µH
100 µH
100
10 µH
10
1 µH
1
0.1
0.1
0.01
1
0.1
10
Frequency (MHz)
0.510
max*
12,95
XXX
X
Start
0.145 ±0.010
3,69 ±0,254
1
Current (A)
10
100
Dash number
0.125 ±0.010
3,18 ±0,254
0.370max
9,40
0.1
Finish
Internal code
0.330
8,38 dia
0.205 max
*
5,21
0.100
2,54
0.100
2,54
0.300
7,62
an additional 0.01/0,254
* inAllow
length and 0.005/0,127 in
height for optional tin-lead and
tin-silver-copper application.
Recommended
Land Pattern
0.115
2,92
0.110
2,79
0.405
10,29
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 179-2 Revised 09/25/12
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages