MSS1210

Document 902-1
Shielded Power Inductors – MSS1210
• 12.3 × 12.3 mm footprint; 10 mm high shielded inductors
• 27 inductance values from 10 µH to 10 mH
• Low DCR and excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environment RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight: 5.1 – 6.2 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 300/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick,
20 mm pocket spacing, 10.3 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
6
SRF
Irms (A)
3
Inductance2 DCR (Ohms) typ4
10% 20% 30% 20°C 40°C
Part number1
(µH)
typ max (MHz) dropdrop droprise rise
MSS1210-103ME_
10±20%
MSS1210-153ME_
15±20%
MSS1210-223ME_
22±20%
MSS1210-333ME_
33±20%
MSS1210-473ME_
47±20%
MSS1210-683ME_
68±20%
MSS1210-104KE_
100±10%
MSS1210-124KE_
120±10%
MSS1210-154KE_
150±10%
MSS1210-184KE_
180±10%
MSS1210-224KE_
220±10%
MSS1210-334KE_
330±10%
MSS1210-474KE_
470±10%
MSS1210-684KE_
680±10%
MSS1210-105KE_ 1000±10%
MSS1210-125KE_ 1200±10%
MSS1210-155KE_ 1500±10%
MSS1210-185KE_ 1800±10%
MSS1210-225KE_ 2200±10%
MSS1210-275KE_ 2700±10%
MSS1210-335KE_ 3300±10%
MSS1210-395KE_ 3900±10%
MSS1210-475KE_ 4700±10%
MSS1210-565KE_ 5600±10%
MSS1210-685KE_ 6800±10%
MSS1210-825KE_ 8200±10%
MSS1210-106KE_ 10000±10%
0.014
0.019
0.026
0.033
0.048
0.068
0.106
0.115
0.157
0.173
0.191
0.289
0.434
0.536
0.816
1.07
1.23
1.39
1.82
2.02
2.69
2.98
3.34
3.71
4.97
5.51
7.39
0.016 15.0
0.022 12.0
0.030 9.5
0.039 7.5
0.056
6.0
0.080 4.5
0.125 3.6
0.135 3.3
0.185 2.9
0.203
2.8
0.225 2.7
0.340 1.8
0.510 1.6
0.630 1.4
0.960
1.1
1.26
1.0
1.45
0.85
1.63
0.85
2.14
0.70
2.38
0.65
3.17
0.56
3.50
0.54
3.93
0.51
4.37
0.45
5.85
0.40
6.48
0.38
8.69
0.31
9.6
8.3
6.8
5.4
4.5
3.8
3.1
2.9
2.6
2.3
2.1
1.7
1.4
1.2
0.98
0.91
0.81
0.73
0.66
0.59
0.54
0.50
0.45
0.41
0.38
0.35
0.31
11.5 12.5
9.9 10.7
8.1
8.8
6.4
6.9
5.4
5.8
4.5
4.9
3.7
4.0
3.4
3.7
3.1
3.4
2.8
3.0
2.5
2.8
2.1
2.2
1.7
1.8
1.4
1.6
1.2
1.3
1.1
1.2
0.96 1.0
0.87 0.95
0.79 0.86
0.71 0.77
0.64 0.70
0.60 0.64
0.54 0.58
0.49 0.54
0.45 0.49
0.41 0.45
0.37 0.40
7.3 10
6.4 8.7
4.9 6.7
4.4 5.9
3.4 4.6
3.2 4.3
2.5 3.4
2.4 3.3
1.8 2.5
1.7 2.4
1.6 2.1
1.2 1.7
1.0 1.4
0.98 1.3
0.75 1.0
0.61 0.84
0.58 0.81
0.57 0.79
0.48 0.65
0.45 0.62
0.39 0.54
0.37 0.51
0.35 0.49
0.34 0.48
0.28 0.39
0.26 0.35
0.22 0.30
1.Specify termination and packaging codes:
MSS1210-105KED
Termination:E=RoHS compliant matte
tin over nickel over phos
bronze.
Special order:
Q = RoHS tin-silvercopper (95.5/4/0.5) or
P = non-RoHS tin-lead
(63/37).
Packaging:D
=13″ machine-ready reel.
EIA-481 embossed
plastic tape (300 parts
per full reel).
B=Less than full reel. In
tape, but not machine
ready. To have a leader
and trailer added ($25
charge), use code letter
D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using Agilent/HP 4191A or
equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without
current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not
represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Document 902-1 Revised 09/02/15
Document 902-2
Shielded Power Inductors – MSS1210
Typical L vs Current
Typical L vs Frequency
10000
10000
3300 µH
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
0.1
330 µH
100 µH
100
33 µH
10 µH
10
10
1
100
Current (A)
1
0.1
1
10
100
Frequency (MHz)
0.472 ±0.012
12,0 ±0,3
0.472 ±0.012
12,0 ±0,3
123
Dash
number
X
Internal
code
Parts manufactured prior
to August 2011 may have
a different part marking.
0.025 *
0,635
0.394 ±0.008*
10,0 ±0,2
Recommended
Land Pattern
0.197 ±0.008
5,0 ±0,2
0.217
5,5
0.276 ±0.016
7,0 ±0,4
0.098 ±0.016
2,5 ±0,4
0.375
9,5
0.118
3,0
* For optional tin-lead and tin-silver-copper terminations,
dimensions are for the mounted part. Dimensions before
mounting can be an additional 0.012 inch (0,3 mm).
Dimensions are in
inches
mm
Document 902-2 Revised 09/02/15