XFL7015

Document 1039-1
Shielded Power Inductors – XFL7015
• Very low profile, only 1.5 mm tall
• High current and very low DCR
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Core material Composite
Weight 0.37 – 0.38 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 3000/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 1.65 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2 DCR (mOhms)3
Isat (A)5 Irms (A)6
SRF typ4
Part number1
±20% (µH)
typ max
(MHz)
10% drop 20% drop 30% drop
20°C rise 40°C rise
XFL7015-251ME_ 0.25
3.904.30
80
9.0 12.5 14.5
16.0 20.0
XFL7015-471ME_ 0.47
5.806.38
56
6.5 10.0 11.5
12.5 17.0
XFL7015-681ME_ 0.68
7.708.47
49
4.7 8.5 10.0
11.5 15.0
XFL7015-102ME_ 1.0
12.3 13.6
39
4.0 6.3 7.4
9.0012.0
XFL7015-152ME_ 1.5
14.716.2
33
3.0 5.5 6.6
7.25 9.10
XFL7015-222ME_ 2.2
22.024.2
29
2.7 4.8 6.3
6.25 8.25
1. When ordering, please specify termination and packaging codes:
XFL7015-222MEC
Termination:E=RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel).
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(3000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly dependent on many factors including
pcb land pattern, trace size, and
proximity to other components.
Therefore temperature rise
should be verified in application
conditions.
Document 1039-1 Revised 09/01/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 1039-2
Shielded Power Inductors – XFL7015
L vs Frequency
0.295 ±0.020
7,5 ±0,5
XXX
Inductance (µH)
10
2.2 µH
0.295 ±0.020
7,5 ±0,5
1.5 µH
1.0 µH
1
Dash
number
0.68 µH
Dash
number
-251
-471
-681
-102
-152
-222
A
±0.008 in
±0,20 mm
(in / mm)
0.241 / 6.12
0.241 / 6.12
0.241 / 6.12
0.239 / 6.08
0.239 / 6.08
0.238 / 6.04
B
(in / mm)
0.245 / 6.22
0.245 / 6.22
0.245 / 6.22
0.242 / 6.16
0.242 / 6.16
0.240 / 6.10
0.47 µH
0.25 µH
0.1
0.1
1
0.063 ±0.002
1,60 ±0,05
10
Recommended
Land Pattern
0.059
max
1,5
0.186
4,72
100
A
(see table)
Frequency (MHz)
0.123 ±0.010
3,12 ±0.25
Dimensions are in
B
(see table)
0.070
1,78
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 1039-2 Revised 09/01/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 1039-3
Shielded Power Inductors – XFL7015
0.3
Inductance (µH)
0.4
0.25 µH
0.2
0.1
0
0
1
3
2
4
5
6
8
7
9
10
Current (A)
11 12 13 14 15
Inductance (µH)
0.6
0.5
0.47 µH
0.4
0.3
0.2
0.1
0
0
1
3
2
5
4
6
8
7
Current (A)
9
10
11 12
1.0
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
0.8
0.6
0.68 µH
0.4
0.2
0
0
1
2
3
4
5
6
Current (A)
7
8
9
10
11
1.6
1.2
1.0 µH
0.8
0.4
0
0
1
3
2
5
4
6
8
7
Current (A)
9
10
2.4
1.8
1.5 µH
1.2
0.6
0
0
1
3
2
4
5
Current (A)
3.0
2.5
6
8
7
9
2.2 µH
2.0
1.5
1.0
0.5
0
0
1
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
2
3
4
Current (A)
5
6
7
Document 1039-3 Revised 09/01/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.