2D-XS Series FIXED INPUT,ISOLATED&UNREGULATED Twin Output DC∕DC Converter SELECTION GUIDE Input FEATURES Output Switching Frequency (KHz,Typ) Nominal Range Max Min 2D050505XS 5 4.5-5.5 5 200 20 80 84 2D050909XS 5 4.5-5.5 9 111 12 82 81 2D051212XS 5 4.5-5.5 12 83 9 82 82 2D051515XS 5 4.5-5.5 15 67 7 83 83 2D120505XS 12 10.8-13 5 200 20 80 180 Voltage(VDC) Current Efficiency (%,Typ) Voltage (VDC) Order code ◆ RoHS compliant ◆ Efficiency up to 85% 2D120909XS 12 10.8-13 9 111 12 83 150 2D121212XS 12 10.8-13 12 83 9 85 84 ◆ SIP Package 2D121515XS 12 10.8-13 15 67 7 83 83 2D240505XS 24 21.6-26 5 200 20 81 82 2D240909XS 24 21.6-26 9 111 12 82 83 2D241212XS 24 21.6-26 12 83 9 84 83 2D241515XS 24 21.6-26 15 67 7 84 80 ◆ Wide temperature performance at full 2 Watt load,-40°C to 85 °C ◆ UL 94V-0 package material ◆ No heatsink required ◆ Low ripple and good EMC features ◆ Industry standard pinout ◆ Power sharing on output ◆ 1KVDC isolation ◆ Continuous Short Circuit Protection ◆ Internal SMD construction ISOLATION SPECIFICATIONS Parameter ◆ No external components required ◆ Good dynamic feature Isolation test voltage Isolation resistance Test conditions Min. Typ. Max. Unit Flash tested for 1 minute and 1mA max(Vin/Vout) 1000 VDC Flash tested for 1 minute and 1mA max(V01/V02) 1000 VDC Test at Viso=500VDC(Vin/Vout) 1000 MΩ Test at Viso=500VDC(V01/V02) 1000 Isolation capacitance MΩ (Vin/Vout) 90 PF (V01/V02) 90 PF MODEL SELECTION 2D①05②05③05④X⑤ S⑥ ①Product Series ③Output Voltage1 ⑤Fixed Input ②Input Voltage ④Output Voltage2 ⑥SIP Package APPLICATIONS The 2D-XS series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) where the voltage of the input power supply is fixed (voltage variation ≤±10%); 2) where isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) where the regulation of the output voltage and the output ripple noise are not demanded. Such as: purely digital circuits,ordinary low frequency analog circuits,and 1GBT power device driving circuits. OUTPUT SPECIFICATIONS Parameter Test conditions Min Typ. Output power Line regulation Load regulation For Vin change of ±1% Max Unit 2 W ±1.2 10% to 100% full load(5V output) 12.8 15 10% to 100% full load(9V output) 8.3 10 10% to 100% full load(12V output) 6.8 10 10% to 100% full load(15V output) 6.3 10 Output voltage accuracy % See tolerance envelope graph Temperature drift 100% full load Output Ripple&Noise* 20MHz Bandwidth 100 0.03 Switching frequency Full load,nominal input 70 %/°C 150 MV p-p Khz * Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power Converter section, application notes. MICRODC R ESERVES THE COPYRIGHT http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 2D-XS Series COMMON SPECIFICATIONS Parameter Conditions Min. Typ. Storage humidity range Operating temperature -40 Storage temperature Lead temperature Units 95 % 85 -55 1.5mm from case for 10 seconds Max. Filtering To get the input/output ripple,an "LC"filtering network may be connected to the input and output ends of the DC/DC converter.Which may produce a more significant filtering effect.It should also be noted that the inductance and the frequency of the "LC"filtering network should be staggered with the DC/DC frequency to avoid mutual interference see (Figure 1). 125 ℃ 300 Temp.rise at full load 15 25 Cooling Free air convection Case material Plastic(UL94-V0) Short circuit protection* Continuous 1 MTBF 3500 Weight s K hours 2.8 *Supply voltage must be discontinued at the end of short circuit duration. g In some circuits which are sensitive to noise and ripple.a filtering capacitor may be added to the DC/DC output end and input end to reduce the noise and ripple. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees (Table 1). EXTERNAL CAPACITOR TABLE (TABLE 1) Vin Cin Vout Cout TYPICAL CHARACTERISTICS (VDC) 5 12 24 -- Temperature Derating Graph (μF) 47 2.2 1.0 -- (VDC) 5 9 12 15 (μF) 4.7 2.2 1.0 0.47 It's not recommend to connect any external capacitor in the application field with less than 0.5 watt output. Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is conn ect ed to the inp ut or outp ut end in ser i es (F i gu r e 2) . OUTLINE DIMENSIONS & PIN CONNECTIONS SIZE Graph RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) FOOTPRINT DETAILS Pin 1 2 4 Note: Unit:mm(inch) Pin section:0.50*0.3mm(0.020*0.012inch) Pin section tolerances: 0.10mm( 0.004inch) General tolerances: ±0.25mm(±0.010inch) 5 6 7 Function VIN GND +V01 0V1 +V02 0V2 When the environment temperature is higher than 71°C, the product output power should be less than 60% of the rated power. No parallel connection or plug and play. Requirement on output load To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of DC/DC converter in addition to a maximum load(namely full load).During operation, make sure the specified range of input voltage is not exceeded,the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 E-mail:[email protected] Website:http://www.microdc.cn REACH COMPLIANT INFORMATION This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2