B-XES-3W

B-XES&F-XES&H-XES Series
Isolated 3W Single Output DC/DC Converters
MODELS Single output
Models
Ouput
Voltage
Ouput
Current max.
H0503XES-3W
3.3VDC
800mA
H0505XES-3W
5VDC
600mA
F0507XES-3W
H0507XES-3W
7.2VDC
417mA
B0509XES-3W
F0509XES-3W
H0509XES-3W
9VDC
333mA
B0512XES-3W
F0512XES-3W
H0512XES-3W
12VDC
250mA
B0515XES-3W
F0515XES-3W
H0515XES-3W
15VDC
200mA
B0518XES-3W
F0518XES-3W
H0518XES-3W
18VDC
167mA
B0524XES-3W
F0524XES-3W
H0524XES-3W
24VDC
125mA
B1203XES-3W
F1203XES-3W
H1203XES-3W
3.3VDC
800mA
B1205XES-3W
F1205XES-3W
H1205XES-3W
5VDC
600mA
B1207XES-3W
F1207XES-3W
H1207XES-3W
7.2VDC
417mA
B1209XES-3W
F1209XES-3W
H1209XES-3W
9VDC
333mA
B1212XES-3W
F1212XES-3W
H1212XES-3W
12VDC
250mA
B1215XES-3W
F1215XES-3W
H1215XES-3W
15VDC
200mA
B1218XES-3W
F1218XES-3W
H1218XES-3W
18VDC
167mA
B1224XES-3W
F1224XES-3W
H1224XES-3W
24VDC
125mA
MODEL SELECTION
B2403XES-3W
F2403XES-3W
H2403XES-3W
3.3VDC
800mA
①
②
③ ④
⑤
⑥
B 24 05 X ES -3W
B2405XES-3W
F2405XES-3W
H2405XES-3W
5VD
600mA
B2407XES-3W
F2407XES-3W
H2407XES-3W
7.2VD
417mA
B2409XES-3W
F2409XES-3W
H2409XES-3W
9VDC
333mA
B2412XES-3W
F2412XES-3W
H2412XES-3W
12VDC
250mA
B2415XES-3W
F2415XES-3W
H2415XES-3W
15VDC
200mA
B2418XES-3W
F2418XES-3W
H2418XES-3W
18VDC
167mA
B2424XES-3W
F2424XES-3W
H2424XES-3W
24VDC
125mA
FEATURES
REGULATED SINGLE OUTPUT
◆
12 PIN SIP PACKAGE
◆
LOW RIPPLE & NOISE
◆
HIGH EFFICIENCY UP TO 70%
◆
INPUT/OUTPUT ISOLATION: 1000,
◆
3000 & 6000VDC
OPERATING TEMPERATURE: -25°C~ +71°C
◆
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
◆
①Product Series
③Output Voltage
⑤EXTEND SIP
②Input Voltage
④Fixed Input
⑥Rated Power
APPLICATIONS
Our series is a family of cost effective 3W
single output DC-DC converters.These
converters combine miniature package in a
12-pin SIP compatible case with high
performance features such as 1000, 3000 &
6000VDC input/output isolation voltage,
continuous short circuit protection with automatic
restart and tight line / load regulation. Seventy
two models operate from input voltages of 5, 12
& 24VDC with producing output voltage levels of
3.3, 5, 7.2, 9, 12, 15, 18, 24VDC.
High performance features include high
efficiency operation up to 70% and output
voltage accuracy of ±2 maximum. Standard
features include an input range of ±10%
tolerance and low output noise and ripple. All
models are package in a low profile
31.80x8.60x13.47mm 12 pin SIP non-conductive
black plastic case. Operation is specified over
the full operating temperature range of -25℃ to
+71℃ with no derating required. Cooling is by
free-air convection.
MICRODC RESERVES THE COPYRIGHT
http://www.microdc.cn
Isolation 1000VDC
Isolation 3000VDC
Isolation 6000VDC
B0503XES-3W
F0503XES-3W
B0505XES-3W
F0505XES-3W
B0507XES-3W
Input
Voltage
5V±10%
12V±10
%
24V±10
%
ELECTRICAL SPECIFICATIONS
Specifications typical at +25 ° C, nominal input voltage, rated output
current unless otherwise specifie
Input Specifications:
Voltage range
±10%
Filter
p (Pi) Network
Isolation Specifications:
Rated voltage (60 sec)
1000, 3000, 6000VDC
Resistance
> 1000MOhm
Capacitance
60pF, typ.
Output Specifications:
Voltage accuracy
±2%, max
Ripple & noise (at 20MHz BW)
75mVp-p, max.
Short circuit protection
Continuous
Short circuit restart
Automatic
Line voltage regulation
±0.5%, max.
Load voltage regulation
±0.5%, max
Temperature coefficient
±0.02%/℃, typ
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 3
B-XES&F-XES&H-XES Series
ELECTRICAL SPECIFICATIONS
Specifications typical at +25
+25°
°C, nominal input voltage, rated output current unless otherwise specifie
General Specifications:
Efficiency
64% to 70%
Switching frequency
125KHz, typ. 100%load
Environmental Specifications:
Operating temperature (ambient)
-25°C~ +71°C
Storage temperature
-40°C~ +125
Case temperature
+90°C, max.
Derating
None required
Humidity (non-condensing)
Up to 90%
Cooling
Free-air Convection
Physical Specifications:
Dimensions
31.80x8.60x13.47mm
1.25x0.34x0.53inches
Weight
10.7g
Case material
Non-conductive black
plastic
OUTLINE DIMENSIONS & PIN CONNECTIONS
Pin
1000, 3000 & 6000VDC
Single
1
+V Input
2
N.C.
3
N.C.
9
N.C.
10
-V output
11
+V output
12
-V input
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646
REACH COMPLIANT INFORMATION
E-mail:[email protected]
Website:http://www.microdc.cn
http://www.microdc.cn
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 3
B-XES&F-XES&H-XES Series
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 3 of 3
Similar pages