High-reliability discrete products and engineering services since 1977 MUR10120E 30A ULTRA FAST RECTIFIER FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Rating Symbol MUR10120E Unit Peak repetitive reverse voltage Working peak reverse voltage DC blocking voltage VRRM VRWM VR 1200 V Average rectified forward current (Rated VR) IF(AV) 10 @ TC = 125°C A Peak repetitive forward current (Rated VR square wave, 20 kHz) IFRM 20 A Non-repetitive peak surge current (surge applied at rated load conditions, halfwave, single phase, 60Hz) IFSM 100 A Operating and storage junction temperature range TJ, Tstg -65 to +125 °C Controlled avalanche energy WAVL 20 mJ Maximum thermal resistance Junction to case RӨJC 2.0 Symbol MUR10120E Unit VF 2.0 2.2 V Maximum instantaneous reverse current (1) (Rated dc voltage, TC = 125°C) (Rated dc voltage, TC = 25°C) IR 1000 100 µA Maximum reverse recovery time (IF = 1.0A, di/dt = 50A/µs) trr Maximum forward recovery time (IF = 6.5A, di/dt = 12A/µs) tfr Peak transient overshoot voltage VRFM °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Parameter Maximum instantaneous forward voltage (IF = 6.5A, TC = 25°C) (IF = 6.5A, TC = 25°C) (1) ns 175 ns 175 14 V Rev. 20121210 High-reliability discrete products and engineering services since 1977 MUR10120E 30A ULTRA FAST RECTIFIER MECHANICAL CHARACTERISTICS Case TO-220AC Marking Alpha-numeric Pin out: See below Rev. 20121210 High-reliability discrete products and engineering services since 1977 MUR10120E 30A ULTRA FAST RECTIFIER Rev. 20121210