pdf

www.osram.com
Product Information
LED STAR CLASSIC B25/P25 frosted
Product Overview
Product
Wattage
CCT
lm
Base
LED STAR CLASSIC B25 frosted
3,6
2700
250
E14
LED STAR CLASSIC P25 frosted
3,6
2700
250
E14
LED STAR CLASSIC P25 frosted
3,6
2700
250
E27
Benefits
Key Features
•
•
•
•
• 3,6W LED lamp as high-quality replacement for a 25W
incandescent candle lamp
• E14 base and E27 base
• Available in 2700K warm white color temperature
• Energy efficiency class A+
• 15,000 hours lifetime³
• Similar dimensions as incandescent candle lamp
• UV and NIR radiation free
• Mercury free
• 3 years Osram Guarantee (www.osram.com/guarantee)
For all household luminaires
Low energy consumption and maintenance costs
Longer lifetime²
GLS-like Design
Product
Wattage
CCT
lm
Base Diameter
Lenght
Weight
Viewing
Angle
EAN10
EAN40
(ship.unit)
Ship
.
unit
LED STAR CLASSIC B25
frosted
3,6
2700
250
E14
35 mm
100 mm
33 g
4052899913615
4052899913707
6
LED STAR CLASSIC P25
frosted
3,6
2700
250
E14
45 mm
78 mm
31 g
4052899913646
4052899913738
6
LED STAR CLASSIC P25
frosted
3,6
2700
250
E27
45 mm
78 mm
31 g
4052899913677
4052899913769
6
2
Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the
technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary
from the typical values.
3 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux
(L70B50, IEC60969).The lifetime is estimated at room temperature (25°C),
C), free air burning, base up burning position and at rated voltage.
LED STAR CLASSIC B25/P25 frosted
1
www.osram.com
Product Information
LED STAR CLASSIC B25/P25 frosted
Common Characteristics3
Average
lifetime4
Switching
cycles
Casing material
Starting time
Warm up time
for 60% light
Power factor
15,000 hrs
100,000
Plastic
<1s
0.0 s
0.44
Nominal current
Tc temperature
max.5
CRI
Mercury max.
36 mA
77°C
80
0.0 mg
(30s on, 30s off)
TC
TC
Good heat exchange supports ideal performance
Disposal information
• Lamps with WEEE sign can be returned at specific collection points.
• LED lamps have to be disposed as special waste.
3
Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the
technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary
from the typical values.
4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux
(L70B50, IEC60969).The lifetime is estimated at room temperature (25°C),
C), free air burning, base up burning position and at rated voltage.
5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated
indicat position) under normal operating conditions and at
the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01)
LED STAR CLASSIC B25/P25 frosted
2
www.osram.com
Product Information
LED STAR CLASSIC B25/P25 frosted
Application information
•
•
•
•
•
Suitable for indoor application.
For outdoor applications and operation in damp locations special approved fixture are required.
Input voltage: 220-240V
Storage temperature & humidity conditions (-20°C up to +40°C,
C, at max. 95% relative humidity)
Operating temperature & humidity conditions (-20°C
C up to +40°C,
+40
at max. 95% relative humidity)
Lamp conformity
•
•
•
•
•
•
•
•
•
•
•
2004/108/EC Electromagnetic compatibility (EMC)
244/2009 Ecodesign requirements for non-directional
directional household lamps
IEC/ PAS 62612 Self ballasted LED-lamps
lamps for general lighting services – Performance requirements
2009/125/EC Ecodesign requirements for energy related products
2011/65/EC
/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)
(
1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation)
2002/96/EC
/EC Waste Electrical and Electronic Equipment Directive (WEEE)
EN 62471 Photobiological safety of lamps and lamp systems
EN 55015 Limits and methods of measurement of radio disturance
EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission
EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low
voltage supply systems
• EN61547 Electromagnetic compatibility immunity requirements
• 1194/2012 Eco design requirement for directional lamps, light emitting diode lamps and related equipment (DIM II)
• IEC 62560 self-ballasted LED-lamps
lamps for general lighting services by voltage >50V
>
– Safety specifications
• 874/2012/EU
/EU Energy labeling of electrical lamps and luminaires
LED STAR CLASSIC B25/P25 frosted
3