UNISONIC TECHNOLOGIES CO., LTD UCD4011B Preliminary CMOS IC QUAD 2-INPUT NAND BUFFERED B SERIES GATE DESCRIPTION The UTC UCD4011B contains four independent 2-input NAND gates which perform the function Y=A • B in positive logic. SOP-14 FEATURES * 5V-10V-15V Parametric Ratings * Quad 2-Input NAND Gate * Symmetrical Output Characteristics * Maximum Input Current of 1uA at 15V Over Full Package Temperature Rage * Low Power TTL: Fan Out of 2 Driving 74L or 1 Driving 74LS Compatibility ORDERING INFORMATION Ordering Number Lead Free Halogen Free UCD4011BL-S14-R UCD4011BG-S14-R www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd Package Packing SOP-14 Tape Reel 1 of 5 QW-R502-517.d UCD4011B Preliminary PIN CONFIGURATION FUNCTION TABLE (each gate) INPUT(A) H H L L INPUT(B) H L H L CMOS IC OUTPUT(Y) L H H H LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-517.d UCD4011B Preliminary CMOS IC ABSOLUTE MAXIMUM RATING(TA=25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VDD -0.5 ~ 18 V Input Voltage V(nA,nB) -0.5 ~ VDD +0.5 V Output Voltage V V(nY) -0.5 ~ VDD +0.5 Storage Temperature TSTG -65 ~ + 150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Operating Temprature SYMBOL VDD TOP RATINGS 3 ~ 15 -55 ~ 125 UNIT V °С ELECTRICAL CHARACTERISTICS(TA=25°С, unless otherwise specified) PARAMETER SYMBOL High-Level Input Voltage VIH Low-Level Input Voltage VIL High-Level Output Voltage VOH Low-Level Output Voltage VOL High-Level Output Current (NOTE) IOH Low-Level Output Current (NOTE) Input Leakage Current IOL II(LEAK) Quiescent Supply Current IQ TEST CONDITIONS VDD= 5V, VO=0.5V VDD= 10V, VO=1.0V VDD= 15V, VO=1.5V VDD= 5V, VO=4.5V VDD= 10V, VO=9.0V VDD= 15V, VO=13.5V VDD= 5V, │I0│＜1μA VDD= 10V, │I0│＜1μA VDD= 15V, │I0│＜1μA VDD= 5V, │I0│＜1μA VDD= 10V, │I0│＜1μA VDD= 15V, │I0│＜1μA VDD= 5V, VO=4.6V VDD= 10V, VO=9.5V VDD= 15V, VO=13.5V VDD= 5V, VO=0.4V VDD= 10V, VO=0.5V VDD= 15V, VO=1.5V VDD= 15V ,VIN = VDD or GND VDD= 5V, VIN = VDD or VSS, IOUT = 0 VDD= 10V, VIN = VDD or VSS, IOUT = 0 VDD= 15V, VIN = VDD or VSS, IOUT = 0 MIN 3.5 7.0 11.0 4.95 9.95 14.95 -0.51 -1.3 -3.4 0.51 1.3 3.4 TYP 3 6 9 2 4 6 5 10 15 0 0 0 -0.88 -2.25 -8.8 0.88 2.25 8.8 0.004 0.005 0.006 MAX UNIT V 1.5 3.0 4.0 V V 0.05 0.05 0.05 V mA 0.1 0.25 0.5 1.0 µA µA Note: IOL and IOH are tested one output at a time UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-517.d UCD4011B Preliminary SWITCHING CHARACTERISTICS(TA=25°С, Input: tR=tF=20ns, unless otherwise specified) PARAMETER SYMBOL tPLH Propagation delay from Input(A or B) to Output(Y) tPHL Transition Time CMOS IC tTLH tTHL TEST CONDITIONS VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ VDD=5V, CL=50pF, RL=200kΩ VDD=10V, CL=50pF, RL=200kΩ VDD=15V, CL=50pF, RL=200kΩ MIN TYP 85 40 30 120 50 35 90 50 40 MAX 250 100 70 250 100 70 200 100 80 UNIT TYP 5 14 MAX 7.5 UNIT ns ns OPERATING CHARACTERISTICS(TA=25°С, unless otherwise specified) PARAMETER Average Input Capacitance Power Dissipation Capacitance SYMBOL TEST CONDITIONS CIN Any Input Cpd Any Gate UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN pF 4 of 5 QW-R502-517.d UCD4011B Preliminary CMOS IC TEST CIRCUIT AND WAVEFORMS Output CL 50pF RL 200kΩ VCC V 50% 50% Vo 0V t PHL t PLH VOH 50% 50% VOL Note: CL includes probe and jig capacitance. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-517.d