ISSUE NO : Rev: 0.0 SPECIFICATION MODEL : SPFCW24301CLS1D2T0 High Power Flash LED CUSTOMER : General CUSTOMER : CHECKED CHECKED APPROVED SAMSUNG ELECTRONICS DRAWN CHECKED APPROVED SAMSUNG ELECTRONICS CO,.LTD. San #24 Nongseo-Dong, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711, Korea http://www.samsung.com/sec 1. Product Outline 1) Features . Low profile Fresnel lens-integrated LED ( 4.1 x 3.9 x t 1.8mm ) . Wide Beam Angle ( △θ : 670x590 ) for uniform illuminance . InGaN/GaN MQW LED with long-time reliability . Lead (Pd) free product - RoHS compliant 2) Applications . Flashlight for cameraphones & digital still cameras . Torchlight . Amusement equipment . Other applications 2. Absolute Maximum Rating 1) Torch Mode Operation Forward Current (Ta = 25℃) .......... 300 mA 2) Flash Mode Peak Pulsed Forward Current ........................ 1300 mA (Pulse width t≤300msec, Duty ratio=0.06, Ta=25℃) 3) Reverse Current ........................................................................ 85 mA 4) Thermal Resistance ( Rth,j-s ) ..................................................... 9 K/W 5) LED Junction Temperature ( TJ ) .............................................. 125℃ 6) Operating Temperature Range ( Topr ) ........................ -40℃ ∼ 85℃ 7) Storage Temperature Range ( Tstg ) ......................... -40℃ ∼ 100℃ ⓐ Samsung LED recommend using 150mA for Torch Mode (IEC62471 - Risk group 1 @150mA) 3. Characteristics 1) Specifications ( Ta : 25℃ ) Item Unit Condition Rank Min Typ Max Luminous Intensity cd IF = 1000 ㎃ T0 165 200 270 Forward Voltage (VF) V IF = 1000 ㎃ S1 2.8 3.5 4.0 Chromaticity Coordinates x,y IF = 1000 ㎃ Reverse Voltage (VR) V IR =10 ㎃ 0.6 - 1.2 Low Current Voltage (VF) V IF = 1 ㎂ 1.7 - 2.7 Size mm - * Luminous Notes: * Samsung * Samsung * Samsung * Samsung * Samsung * Samsung Refer to the CIE chromaticity coordinates in page 7 4.1 x 3.9 x 1.8t intensity(cd) in 1 meter distance from light source is defined as Illuminance(lux). LED LED LED LED LED LED uses the above specifications table as the final product test criteria. maintains a tester tolerance of ±10% on flux measurements. maintains a tolerance of ±0.15V on forward voltage measurements. maintains a tester tolerance of ±0.01 on CCx, CCy measurements. maintains a tester tolerance of ±10% on low current voltage measurements. maintains a tolerance of ±0.1 mm on device dimensions. http://www.samsung.com/sec 2) General characteristics ( Ta : 25℃ ) Item Unit Illuminance (at 1 meter) Condition Min Typ Max IF = 300 mA 63 76 103 IF = 700 mAⓐ 128 156 209 IF = 1000 mAⓑ 165 200 270 lux IF = 300 mA Luminous Intensity 63 76 103 mAⓐ 128 156 209 IF = 1000 mAⓑ 165 200 270 IF = 300 mA cd Luminous Flux IF = 700 93 102 138 mAⓐ 210 230 310 IF = 1000 mAⓑ 245 267 360 IF = 300 mA 2.5 3.1 3.6 IF = 700 mAⓐ 2.7 3.4 3.9 lm Forward Voltage (VF) IF = 700 V 2.8 3.5 4.0 IF = 300 mA 4939 5424 5908 IF = 700 mAⓐ 5037 5531 6025 mAⓑ 5100 5600 6100 0.6 - 1.2 IF = 1000 CCT °K IF = 1000 mAⓑ Reverse Voltage (VR) V IR = 10 mA Size mm - 4.1 x 3.9 x 1.8t Notes: Peak current 1.5A 1.4A 1.3A 1.2A 1.1A 1.0A on time 0.10sec 0.20sec 0.30sec 0.40sec 0.45sec 0.50sec operation time 5sec 5sec 5sec 5sec 5sec 5sec Duty ratio 0.02 0.04 0.06 0.08 0.09 0.10 3) Chromaticity Diagram Condition IF=1000mA x 0.3396 http://www.samsung.com/sec 0.3235 y 0.3184 0.3449 0.3100 0.2929 0.3555 0.3819 4. Typical Characteristics Graph * These graphs show typical values. Illuminance vs. Forward Current Forward Current vs. Forward Voltage Luminous Flux vs. Forward Current Relative Spectral Emission * Radiation Pattern Intensity Drop vs. Time at Pulse Operation (IF = 300mA) * LED under test is SMT-soldered on a Samsung LED standard FR4 PCB http://www.samsung.com/sec * These graphs show typical values. Chromaticity vs. Forward Current CCT vs. Forward Current (Ta = 25℃) Max. Pulse Rating Max. DC Rating Uniformity Map http://www.samsung.com/sec (Ta = 25℃) 5. Precaution for use 1) For overcurrent-protection, customers are recommended to apply resistors connected in series with the LEDs to mitigate sudden change of the forward current caused by shift of the forward voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When cleaning is required, IPA is recommended as cleaning agent. Solvent-based cleaning agent such as Zestron(R) may damage the silicone resins used in the device. 3) When the device is in operation, the forward current should be carefully determined considering the maximum ambient temperature and the corresponding junction temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung LED, they should be packed with a nitrogen-filled container. (Shelf life of sealed bags: 12 months, temp. 0~40℃, 20~70%RH) 5) After storage bag is open, device subject to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 168 hours (7 days) at an assembly line with a condition of no more than 30℃/60%RH. b. Stored at <10% RH. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading reaches 60% at 23±5℃. 8) Devices must be baked for 24hours at 65±5℃, if baking is required. 9) The LEDs are sensitive to the static electricity and surge current. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leakage current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 10) The LEDs package must be handled with care, especially top surface of the lens must not be stressed on handling. Pick the sidewall of package mold and do not touch the lens area when manual movement of each LEDs. 11) When processing by automated pick and place machine for SMT, a pickup tool with diameter smaller than the width of the LED Lens can cause damage to wire. The recommended outer diameter of pickup tool is more than 4mm. http://www.samsung.com/sec 6. QC Flow Chart 4139(4.1*3.9*1.8) Customer http://www.samsung.com/sec 7. Hazard Substance Analysis(SGS) http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec 8. LED Eye Safety Standards (IEC 62471) http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec http://www.samsung.com/sec