TA0181A _Rev.2.0_.pdf

TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Approval Sheet For Product Specification
Issued Date:
Product Name: SAW Filter 171MHz
TST Parts No.:TA0181A
Customer Parts No.:
Company:
Division:
Approved by :
Date:
Checked by:
Elvis Chiu
Approval by:
Vincent Lee
Date:
2003/05/02
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
FR-03S06-02
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
SAW Filter 171 MHz
MODEL NO.: TA0181A
REV. NO.:1
A. MAXIMUM RATING:
1.Input Power Level: 0 dBm
2.DC voltage: 10 V
3.Operating Temperature: -10°C to +50°C
4.Storage Temperature: -40°C to +85°C
B. ELECTRICAL CHARACTERISTICS:
Characteristics
Center frequency FC
(MHz)
I.L. (Within FC± 4 MHz)
Attenuation:( Reference level from 0 dB)
FC - 100MHz to -38.8MHz
(dB )
FC +38.8MHz to + 100MHz
(dB )
Specification
Note
171
6.5 Max.
1
50 Min.
42 Min.
1
210 Ω // 11 Pf
210 Ω // 11 Pf
2
2
(dB )
Impedance at FC ; Input
ZIN =RIN//CIN
Output ZOUT =ROUT//COUT
Note1. The standard definitions is in JIS C 6703
Note2.
Source im pedance
Load im pedance
50Ω
50Ω
Z IN =210Ω // 11pF
Z OUT =210Ω // 11pF
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
2
C. Frequency Characteristics :
TA0181A
0
-2
-4
Att.(dB)
-6
-8
-10
-12
-14
-16
-18
-20
175
177
179
181
191
201
211
221
173
171
169
167
165
163
161
Freq.(MHz)
TA0181A
0
-10
Att.(dB)
-20
-30
-40
-50
-60
-70
-80
181
171
161
151
141
131
121
Freq.(MHz)
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
3
D. MEASUREMENT CIRCUIT:
Network analyzer
50Ω
160Ω
2
SAW Filter
L
6
160Ω
50Ω
L
1,3,5,7
0 dB Level
Network analyzer
50Ω
160Ω
160Ω
50Ω
E.OUTLINE DRAWING:
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
4
F. PACKING:
1. REEL DIMENSION
2. TAPE DIMENSION
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
5