TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Sep, 18, 2002 Product Name: SAW Filter 1842.5MHz SMD 2.5X2.0 mm TST Parts No.: :TA0206A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Vincent Lee Date: Sep, 18, 2002 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 1 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1842.5 MHz for Mobile Communication MODEL NO.: TA0206A REV. NO.:1.0 A. MAXIMUM RATING: 1.Input Power Level: 13 dBm 2.DC voltage: 0 V 3.Operating Temperature: -25°C to +75°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Min. Typ. Max. Center frequency Fc (dB) Insertion loss within 1805 ~1880 MHz IL (dB) Amplitude ripple (p-p) within 1805 ~1880 MHz (dB) Attenuation (Reference level from 0 dB) D.C. ~ 500 MHz (dB) 500 ~ 1200 MHz (dB) 1200 ~ 1705 MHz (dB) 1705 ~ 1785 MHz (dB) - 1842.5 3.15 1.4 4.0 2.3 19.0 17.5 19.0 8.0 28.0 22.5 22.0 15.5 - 1920 ~ 1980 10.0 31.0 - 23.0 15.0 13.0 - 26.5 29.0 18.5 1.8 50 50 2.3 - MHz (dB) 1980 ~ 2700 MHz (dB) 2700 ~ 3840 MHz (dB) 3840 ~ 6000 MHz (dB) VSWR within 1805 ~1880 MHz Source impedance Zs (Ω) Load impedance ZL (Ω) Note1. No matching network required for operation at 50 Ω TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : Transfer function TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Reflections Functions : S11 VSWR S22 VSWR TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT: E △ E □ E.OUTLINE DRAWING: E E △ □ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION E E 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6