TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Aug, 2, 2007 Product Name: SAW Filter 1688.42 MHz SMD 3.0X3.0 mm TST Parts No.: TA0727A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 8, 2, 2007 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1688.42 MHz MODEL NO.:TA0727A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -50°C to +95°C B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (differential) : Terminating load impedance (differential) : Item RoHS Compliant Lead free Lead-free soldering Zs = 150 Ω // 22 nH ZL = 150 Ω // 22 nH Unit MHz Min. - Type. 1688.42 Max. - Note - MHz 40 60 - - Min. Insertion Loss in 1668.42~1708.42 MHz dB - 2.7 5.4 - Amplitude ripple (1668.42 MHz ~ 1708.42 MHz) dB - 0.8 2.2 - Phase error (1668.42 MHz ~ 1708.42 MHz) (3) deg - 1.1 5 - - 8 25 - Center Frequency Fc Bandwidth at –2.2 dB Group Delay ripple(1668.42 MHz ~ 1708.42 MHz) Attenuation (1) 50 ~ 1606.36 MHz dB 44 50 - - 1770.48 ~ 2000 MHz dB 44 52 - - 2000 ~ 4000 MHz dB 15 41 - - Notes : (1) The amplitude reference is insertion loss at Fc. (2) The amplitude ripple is defined as the max. level – min. level over any 30 MHz block of the given bandwidth. (3) The phase error is measured over any 30 MHz block of the given bandwidth. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: G △ 3 □ 6 H A, B : Balance Input D, E : Balance Output C,F,G,H : Ground Unit : mm △ : Year Code (2006->6, …, 2009->9) □ : Date Code (Follow the table from planner each year) D. MEASUREMENT CIRCUIT: 22nH 150Ω 150Ω 22nH TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=1000 ; 13”=3000 ) 2.TAPE DIMENSION 3 6 △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8