TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: May, 26, 2008 Product Name: SAW Filter 1178.12 MHz SMD 3.0X3.0 mm TST Parts No.: TA0844A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 5,26, 2008 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1178.12 MHz MODEL NO.:TA0844A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -50°C to +95°C RoHS Compliant Lead free Lead-free soldering B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (differential) : Terminating load impedance (differential) : Item Zs = 150 Ω // 27 nH ZL = 150 Ω // 27 nH Unit MHz Min. - Typ. 1178.12 Max. - Note - MHz 40 55 - - Insertion Loss in 1158.12~1198.12 MHz dB - 2.5 5 - Amplitude ripple (1158.12 MHz ~ 1198.12 MHz) dB - 0.9 2 - Phase error (1158.12 MHz ~ 1198.12 MHz) (3) deg - 3 5.5 - - 1.7 2.5 - Center Frequency Fc Bandwidth at –2 dB I/O VSWR (1158.12 MHz ~ 1198.12 MHz) Attenuation (1) 50 ~ 1096.06 MHz dB 42 55 - - 1260.18 ~ 2000 MHz dB 42 50 - - 2000 ~ 3500 dB 35 44 - - MHz 3500 ~ 6000 MHz dB 22 26 Notes : (1) The amplitude reference is insertion loss at Fc. (2) The amplitude ripple is defined as the max. level – min. level over any 30 MHz block of the given bandwidth. (3) The phase error is measured over any 30 MHz block of the given bandwidth. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: △ B □ H A, B : Balance Input D, E : Balance Output C,F,G,H : Ground Unit : mm △ : Year Code (2006->6, …, 2009->9) □ : Date Code (Follow the table from planner each year) D. MEASUREMENT CIRCUIT: 27nH 150Ω 150Ω 27nH TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=1000 ; 13”=3000 ) 2.TAPE DIMENSION BH △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8